Universal remote control

SRU3004_10_95_Transfer:125254c4_SRU5110_86 12-06-09 14:15 Pagina 6
Repairing a key
If a device does not respond properly to a key command you can
have the remote control search for the key function in its database.
During initial setup
1 Make sure the receiving device is able to respond. E.g. when
you try to repair the Play button for your DVD player, make
sure to insert a DVD in the DVD player otherwise the Play
button is not able to function.
2 Press the key that does not function, keep it pressed and
immediately release it when the device responds.
Repeat this for every key that does not function.
• If the key still does not function (properly), try pressing it
again for a longer period of time.
After initial setup
1 Make sure the receiving device is able to respond. E.g. when
you try to repair the Play button for your DVD player, make
sure to insert a DVD in the DVD player otherwise the Play
button is not able to function.
2 Select the device you wish to
operate (e.g. DVD).Keep the device
key (DVD) pressed until it blinks
twice and then remains lit.
3 Keep keys and pressed
simultaneously for 3 seconds.
4 Press the key that does not function,
keep it pressed and immediately
release it when the device responds.
• If the key still does not function (properly), try pressing it
again for a longer period of time.
3. Keys and functions
3 sec.
The illustration on page 3 gives an overview of all keys and their
functions.
1 y Standby .....................Switches TV, STB (set-top boxes for
cable box, satellite receiver, Digital Video
Broadcasting Terrestrial device - DVB-T),
DVD player/recorder or VCR on or off.
2 MENU / ..................DVD:
- switches the disc menu on and off.
- pressed together with SHIFT 5: enters
the system menu.
TV:
- switches teletext on/off.
- pressed together with SHIFT 5: opens
the TV menu.
VCR: pressed together with SHIFT 5:
opens the VCR menu.
6 EN