AGCO Parts & Weasler Driveline Catalog

METRIC DRIVELINES
& COMPONENTS
Inner Profile Yoke
With Bearing Groove
(Guard must rotate freely on yoke)
Stock
Dim. “A” Bore
Number mm in
300-7234 34.5 1 23/64" (1.36)
Inner Tube
34.5 (4.0 Wall) mm
1.36" (.16" Wall)
Outer Profile Yoke
With Bearing Groove
(Guard must rotate freely on yoke)
Stock
Dim. “A” Bore
Number mm in
700-7241 41.3 1 5/8" (1.63)
Implement Yoke
2200/200 Series (cont’d.)
Stock
Length
Number m in
400-7234 1.5 59 1/16" (59.06)
404-7234 1.0 39 3/8" (39.37)
Roll Pin
Stock Dim. “A” Dim. “B”
Number mm in mm in
508-1060 10.0 25/64" (.39) 60.0 2 23/64" (2.36)
Round Bore
With Keyway & Set Screw
Stock Dim. “A” Bore Standard Keyway
Number mm in mm in
800-8225 25.0 63/64" (.98) 8.0 5/16" (.31)
800-8208 25.4 1" (1.0) 6.4 1/4" (.25)
800-8230 30.0 1 3/16" (1.18) 8.0 5/16" (.31)
800-8210 31.8 1 1/4" (1.25) 6.4 1/4" (.25)
800-8211 34.9 1 3/8" (1.38) 8.0 5/16" (.31)
800-8218 28.6 1 1/8" (1.13) 6.4 1/4" (.25)
800-8220 31.8 1 1/4" (1.25) 8.0 5/16" (.31)
Outer Tube
41.0 (2.9 Wall) mm
1.614" (.114" Wall)
Stock
Length
Number m in
600-7241 1.5 59 1/16" (59.06)
604-7241 1.0 39 3/8" (39.37)
Shear Pin
Stock
Dim. “A” Bore
Number mm in
802-8220 (w/3/8" Pinhole) 31.8 1 1/4" (1.25)
802-8222 (w/1/2" Pinhole) 35.0 1 3/8" (1.38)
802-8225 (w/5/16" Pinhole) 25.0 63/64" (.98)
802-8230 (w/25/64" Pinhole) 30.0 1 3/16" (1.18)
Guard
Order Bearings As Required
Stock
Number Overall Driveline Length Bearing Kit (2-per kit)
900-2548 48" 961-0251
900-2560 60" 961-0251
Easy Lock TM Replacement Kit
Part Number: 13005000 (4-per Kit)
Assembly instructions included with guard
Note: When installing Guards observe the following:
1) Install proper nylon bearing (See Page 14)
2) Check to insure guards rotate freely on the yokes
118