Controllers - AGCO Parts
Controllers - AGCO Parts Controllers - AGCO Parts
Wet Seal Self-Priming Pumps Banjo wet seal pumps are equipped with a double seal arrangement where the seal is contained in an ethylene glycol (antifreeze) reservoir. This enables the pump to run dry for short time periods without damaging the seal. • Viton double seal in ethylene glycol reservoir • Sight tube indicator • Dynamic balanced impeller • All stainless steel hardware Note: See the Technical Pages for more information on repairs. | Part | Description | | AG055464 | 3" Cast Iron Pump, 11-HP Honda | | AG053730 | 2" Stainless Steel Pedestal Pump with 3/4" Shaft | Hypro Transfer Pumps Fill-Rite Series 400 The Fill-Rite Series 400 diaphragm pump transfers all types of materials from clear, thin flowables to thick viscosity encapsulated products and suspensions in all types of weather. This pump is powered by a 12v DC 1/4-h.p. motor that draws just 16 amps under normal operating conditions. Note: DO NOT use for fluids with low flash points. | Part | Description | | AG716619 | 12V Motor and Pump Only | | AG716618 | 12V Motor Only | Model 420 Pump Kit Includes pump and motor, 20' battery cable, bung adapter, nozzle boot, 1" manual nozzle, 1" x 12' EPDM hose, and polypropylene suction pipe. 35 lbs. | Part | Description | | AG053160 | Model 420 Pump Kit, DC | Pumps Hypro self-priming centrifugal pumps handle big, high capacity, liquid transfer jobs with ease. The line of pumps offer flow rates from 150 gpm to 440 gpm to make short work of jobs such as filling nurse tanks, watering seedbeds, and transferring liquids.The durable and powerful line includes polypropylene, aluminum and cast iron models. Use them for transferring water, liquid fertilizers, and other chemicals compatible with pump materials. Polypropylene is a lightweight option that provides excellent resistance to corrosive chemicals. Aluminum is an economical choice for water transfer. Cast Iron is most suitable for rugged applications. Note: PowerPro engines feature overhead valves (OHV) and low-oil sensor. 13 HP engine has electric start. | Part | Description | | AG428205 | Pump 3" Poly, 13 HP Electric Start - 440 GPM | | AG427031 | Pump 2" Poly, 3 Vane Impeller, 5.5HP, 150 GPM | | AG427196 | Pump 2" Poly, 5 Vane Impeller, 6.5HP, 200 GPM | | AG427197 | Pump 2" Cast, 6.5HP, 170 GPM | | AG427198 | Pump 3" Cast, 9HP, 330 GPM | | AG427199 | Pump 3" Cast, 13HP elec start, 330 GPM | | AG427200 | Pump 2" Aluminum, 5.5HP, 147 GPM | | AG427201 | Pump 3" Aluminum, 6.5HP, 259 GPM | | AG427202 | Trash Pump 3" Aluminum, 6.5HP, 272 GPM | Chemtraveler TM Make chemical handling easy with the Chemtraveller. The Model 435 12V pump is mounted on a rugged tubular frame. Kit includes 825 digital meter, 20' battery cables, 1" x 9' suction hose, 1" x 14' discharge hose, and ball valve nozzle. Weight: 50 lbs. | Part | Description | | AG713211 | Chemtraveler, 12V DC | HP-55 Drum Pump The HP-55 Drum Pump is designed to efficiently deliver high volumes of harsh and viscous chemicals at low pressures.Fits 30 and 55 gallon containers. Features: • Efficient, patented double pumping action ensures product delivery on both up and down strokes • No-friction design eliminates wear and prevents jamming • Outlet spout swivels to prevent drips • Outlet spout accepts extender hose • 50 mm (2 in) buttress adapter • 50 mm (2 in) NPT adapter • Anti-pumping safety device • Wetted materials • Food grade polypropylene • Polyethylene | Part | Description | | AG426653 | HP-55 Drum Pump | 90
Pacer Hand Pump Heavy-duty, double-acting piston-pump for use with herbicides, pesticides, and fumigants. Pump features cork/nitrile gasket, Viton O-Rings, and Viton vacuum breaker. Also included is 8 feet of EPDMlined hose with nozzle and two-piece poly suction tube with standard 2" NPT bung adapter. Pump will discharge one quart per full cycle. • Two-position pump handle • Double-acting piston • Tamper proof • 15-Ft. suction lift • Teflon piston ring • Barrel bung adapter | Part | Description | | AG005465 | Hand Pump | | AG705464 | Repair Kit | Volumetric Hand Pump The Fill-Rite Series 35 is a simple, compact rotary hand pump designed to transfer ag chemicals safely and with accuracy. Handle is turned clockwise to self-prime chamber and turned in the opposite direction to transfer the liquid. Four large viewing windows let you control displacement right to the ounce. Constructed of glass-filled polypropylene with fluorocarbon seals. Counter registers full strokes. | Part | Description | | AG716372 | Hand Pump, 35C, 1 Quart | SS-6 Pump The SS-6 is a 12-volt operated, self-priming diaphragm transfer pump for handling high or low viscosity chemicals. It is constructed of stainless steel, plastic, EPDM, and Viton so it is compatible with most ag chemicals. The pumps flow rate is normally between 7 and 10 GPM, depending on the temperature and viscosity of the liquid being pumped. The SS-6 draws from 12 to 16 amps. SS-6 Pump and motor with 2-piece suction tubing, electrical hardware and 2" Bung adapter. • Length: 14-1/2" • Weight: 12 lbs. • Ports: 1" (F) NPT Note: Repair Kit includes valve plate assembly and bypass. | Part | Description | | AG052444 | S.S.-6 Pump with 12V Motor | | AG052726 | Repair Kit | GPI 12v Herbicide Pump Model P-200H The P-200 H is the new replacement for the former Model M-200H. It is lightweight and highly resistant to corrosion due to its glass-filled polypropylene housing. It still has the high-torque gear reduction motor so it will handle those liquids with high viscosity. Unit is rated at 8 GPM, but delivery will vary based on viscosity and temperature. 12-volt motor draws from 15 to 25 amps under normal conditions. Maximum operating pressure is 10 PSIG, and pump has a 30-minute duty cycle with non-viscous fluid. | Part | Description | | AG711503 | Pump, P-200H | GPI 12v Herbicide Pump Model VP-12 H The VP-12 H piston pump is designed for use with those "hard-to-pump" viscous herbicides. The housing is glass-filled nylon which is lightweight yet durable. Low current draw 21 amps or less under normal operating conditions. 30-minute duty cycle. Delivers 3 to 8 GPM, depending on viscosity. Pump includes 20-ft. power cord, battery clips, and 2" tank bung adapter. Note: Order hose, nozzle and suction pipe separately. | Part | Description | | AG050791 | Model VP-12 H Piston Pump | Herbicide Accessories | Part | Description | | AG052774 | 1" x 12' Hose Assembly | | AG050312 | Plastic Adj. Suction Pipe, 30"-55" | | AG050313 | 5-Gallon Calibration Container | | AG710040 | 1" Manual Trigger Nozzle | Pumps 91
- Page 41 and 42: Raven Control Cables | Part | Descr
- Page 43 and 44: Calc-An-Acre II The Calc-An-Acre II
- Page 45 and 46: RFM60S Flowmeter RFM100 Repair Part
- Page 47 and 48: RFM400 Repair Parts Accu-Flow Kits
- Page 49 and 50: CCS100 Custom Control System Liquid
- Page 51 and 52: CCS100 Flow Sensor Provides informa
- Page 53 and 54: AA144A DirectoValve Repair Parts No
- Page 55 and 56: Raven ® Electric Shut-Off Valves 1
- Page 57 and 58: QC3-Stack Valves Stack up to 10 val
- Page 59 and 60: Polypropylene Union Ball Valve A qu
- Page 61 and 62: All Stainless Steel Valves A qualit
- Page 63 and 64: Centerline Butterfly Valves Notes:
- Page 65 and 66: ACE 150 Series Repair Parts Note: V
- Page 67 and 68: ACE FMC-HYD Repair Parts Repair Par
- Page 69 and 70: SpraCoupe Replacement Pump Ace's ne
- Page 71 and 72: PTO Belt Driven Pumps Cast iron 1-1
- Page 73 and 74: Hypro Series 9303P Pumps Hydraulica
- Page 75 and 76: 9000 Series Centrifugal Pump Repair
- Page 77 and 78: Torque Bar and Chain Anchors pump d
- Page 79 and 80: Hypro D135 Diaphragm Pump Hypro low
- Page 81 and 82: 6500 Series Roller Pump • Max flo
- Page 83 and 84: Hydraulically-Driven Pressure Washe
- Page 85 and 86: 12V Motor Speed Control Controller
- Page 87 and 88: Repair Parts for Scot 2" Pump Scot
- Page 89 and 90: Ace GE-Series Pumps Ace's GE-Series
- Page 91: Type 316 Stainless Steel Pedestal P
- Page 95 and 96: GREEN XLPE for Chemical Transfer Fo
- Page 97 and 98: Dry Poppet Coupling Type B Female c
- Page 99 and 100: Viton Gaskets Note: AG009979 gasket
- Page 101 and 102: 45° and 90° Street Elbows Couplin
- Page 103 and 104: Coupling Flanged Y 45° Note: Full
- Page 105 and 106: Garden Hose Fittings Swivel Barbs M
- Page 107 and 108: 90° Elbows 45° St. Elbows Malleab
- Page 109 and 110: Type 304 Stainless Steel Fittings-
- Page 111 and 112: Air Couplings Allow fast, easy conn
- Page 113 and 114: Polypropylene “Y” Strainers •
- Page 115 and 116: Model 126 Strainers 1-1/4", 1-1/2",
- Page 117 and 118: Model 124 1-1/2" Strainer Parts Hyp
- Page 119 and 120: In-Line Strainer 3/4" NPT inlet, br
- Page 121 and 122: INSECTICIDES TEEJET CONTACT SYSTEMI
- Page 123 and 124: Spray Tips 121
- Page 125 and 126: Turbo TeeJet ® Spray Tips Typical
- Page 127 and 128: Turbo TwinJet ® Typical Applicatio
- Page 129 and 130: 80° XRVS TeeJet Spray Tips Caps fo
- Page 131 and 132: XRC Tip and Cap Combination Extende
- Page 133 and 134: Hypro Ultra Lo-Drift Nozzles The Ul
- Page 135 and 136: Hypro Guardian Spray Tips Guardian
- Page 137 and 138: 80° VisiFlo Spray Tips • The tip
- Page 139 and 140: Drift Guard Twin Jet DG TeeJet Drif
- Page 141 and 142: DG TeeJet 80° Spray Tips Drift Gua
Pacer Hand Pump<br />
Heavy-duty, double-acting piston-pump for use with<br />
herbicides, pesticides, and fumigants. Pump features<br />
cork/nitrile gasket, Viton O-Rings, and Viton<br />
vacuum breaker. Also included is 8 feet of EPDMlined<br />
hose with nozzle and two-piece poly suction<br />
tube with standard 2" NPT bung adapter. Pump will<br />
discharge one quart per full cycle.<br />
• Two-position pump handle<br />
• Double-acting piston<br />
• Tamper proof<br />
• 15-Ft. suction lift<br />
• Teflon piston ring<br />
• Barrel bung adapter<br />
| Part | Description |<br />
| AG005465 | Hand Pump |<br />
| AG705464 | Repair Kit |<br />
Volumetric Hand Pump<br />
The Fill-Rite Series 35 is a simple, compact rotary<br />
hand pump designed to transfer ag chemicals<br />
safely and with accuracy. Handle is turned clockwise<br />
to self-prime chamber and turned in the opposite<br />
direction to transfer the liquid. Four large viewing<br />
windows let you control displacement right to<br />
the ounce. Constructed of glass-filled polypropylene<br />
with fluorocarbon seals. Counter registers full<br />
strokes.<br />
| Part | Description |<br />
| AG716372 | Hand Pump, 35C, 1 Quart |<br />
SS-6 Pump<br />
The SS-6 is a 12-volt operated, self-priming<br />
diaphragm transfer pump for handling high or low<br />
viscosity chemicals. It is constructed of stainless<br />
steel, plastic, EPDM, and Viton so it is compatible<br />
with most ag chemicals. The pumps flow rate is<br />
normally between 7 and 10 GPM, depending on<br />
the temperature and viscosity of the liquid being<br />
pumped. The SS-6 draws from 12 to 16 amps.<br />
SS-6 Pump and motor with 2-piece suction tubing,<br />
electrical hardware and 2" Bung adapter.<br />
• Length: 14-1/2"<br />
• Weight: 12 lbs.<br />
• Ports: 1" (F) NPT<br />
Note: Repair Kit includes valve plate assembly and bypass.<br />
| Part | Description |<br />
| AG052444 | S.S.-6 Pump with 12V Motor |<br />
| AG052726 | Repair Kit |<br />
GPI 12v Herbicide Pump Model P-200H<br />
The P-200 H is the new replacement for<br />
the former Model M-200H. It is lightweight<br />
and highly resistant to corrosion due to its<br />
glass-filled polypropylene housing. It still<br />
has the high-torque gear reduction motor<br />
so it will handle those liquids with high viscosity.<br />
Unit is rated at 8 GPM, but delivery<br />
will vary based on viscosity and temperature.<br />
12-volt motor draws from 15 to 25 amps under normal conditions.<br />
Maximum operating pressure is 10 PSIG, and pump has a 30-minute<br />
duty cycle with non-viscous fluid.<br />
| Part | Description |<br />
| AG711503 | Pump, P-200H |<br />
GPI 12v Herbicide Pump Model VP-12 H<br />
The VP-12 H piston pump is designed for use with<br />
those "hard-to-pump" viscous herbicides. The housing<br />
is glass-filled nylon which is lightweight yet<br />
durable. Low current draw 21 amps or less under<br />
normal operating conditions. 30-minute duty cycle.<br />
Delivers 3 to 8 GPM, depending on viscosity. Pump<br />
includes 20-ft. power cord, battery clips, and 2" tank<br />
bung adapter.<br />
Note: Order hose, nozzle and suction pipe separately.<br />
| Part | Description |<br />
| AG050791 | Model VP-12 H Piston Pump |<br />
Herbicide Accessories<br />
| Part | Description |<br />
| AG052774 | 1" x 12' Hose Assembly |<br />
| AG050312 | Plastic Adj. Suction Pipe, 30"-55" |<br />
| AG050313 | 5-Gallon Calibration Container |<br />
| AG710040 | 1" Manual Trigger Nozzle |<br />
Pumps<br />
91