Controllers - AGCO Parts
Controllers - AGCO Parts Controllers - AGCO Parts
Hydraulic Drive Scot Transfer Pump • All-Iron Construction • Viton Mechanical Seal • Stainless Steel Shaft Sleeve • Double-Sealed Ball Bearings • Hydraulic Motor • Precision Gerotor Design • Rugged Construction • Anti-Friction Bearings • High-Pressure Seals • Scots' 2" Model HYT200SP pump is self-priming and rated from 100 to 125 GPM at 30 PSI. The hydraulic motor requires 7 GPM at 1000 to 1500 PSI. Cast iron for rugged dependability with Viton seal, stainless steel shaft sleeve, and sealed ball bearings are all standard quality features. Note: See the Technical Pages for more information on repairs. | Part | Description | | AG707220 | Transfer Pump | Hydraulic Driven Banjo Poly Pumps Poly pumps are equipped with 12-HP Gresen motors. Motors are compatible with open or closed hydraulic systems that can deliver from 6 to 10 GPM. Note: Housing, Shaft, and Bearing fit both 2" and 3" Pumps. Scot Sprayer Pumps Scot sprayer pumps are all iron construction for rugged performance. They have Viton seals and stainless steel shaft sleeves. They are available with several engine configurations including the new Industrial Plus (IP) unit from Briggs and Stratton shown here. It has most all the high-quality features found on the more expensive engines but is more economical! | Part | Description | | AG709043 | 1-1/2" x 1-1/4" Pump, 5.5-HP Honda | | AG712512 | 2" x 2" Pump, 8-HP Honda Electric Start | | AG715592 | Pump Only 2" x 2" | Scot Sprayer Pump Repair Kit Includes Viton Seal, shaft seal. | Part | Description | | AG704641 | Repair Kit For 5-HP Pumps | | AG709165 | Repair Kit For 8-HP Pumps | Repair Parts for Scot 1-1/2" x 1-1/4" Pump Pumps | Part | Description | | AG057602 | 2" Poly Pump | | AG057603 | 3" Poly Pump | | AG427311 | Hydraulic Pedestal Housing | | AG427312 | Adapter Shaft | | AG427313 | Bearing | Gas Engines Small engines from Honda and Briggs & Stratton. All have horizontal shafts in either the keyed or threaded shaft configuration. | Part | Description | | AG704597 | Engine 3 HP Briggs & | | | Stratton Threaded Shaft 5/8" x 18 | | AG426537 | Engine 3.5 HP Briggs & | | | Stratton Keyed Shaft 3/4" Diameter | | AG008333 | Engine 5.5 HP Honda 3/4" Keyed Shaft | | AG000674 | Engine 8 HP Briggs & | | | Stratton Keyed Shaft I" Dia | | AG008848 | Engine 8 HP Briggs & Stratton with | | | 6-1 Gear Reduction - 1" Dia Keyed Shaft | | AG710532 | Engine 8 HP Honda Keyed Shaft 1" Dia | | AG712036 | Engine 8 HP Honda | | | with Electric Start Keyed Shaft 1" Dia | | AG710531 | Engine 8 HP Honda Threaded Shaft 1" Dia. | | AG711991 | Engine 11 HP Honda with | | | Electric Start Keyed Shaft 1" Dia. | | Ref | Part |Description | | 1 | AG704568 | Seal, Buna, 2" - 3 and 5 HP | | 1 | AG704569 | Seal, Viton, 2" - 3 and 5 HP | | 2 | AG703289 | Drain Plug | | 3 | AG704630 | Shaft Sleeve | | 5 | AG602787 | O-Ring Casing - EPDM | | 7 | AG704633 | Case | | 8 | AG704571 | Flinger, 3 and 5 HP | | 9 | AG704638 | Impeller | | 10 | AG704582 | Adapter | 84
Repair Parts for Scot 2" Pump Scot Chemical Transfer Pump The model LFE 213 has 1-1/4" inlet and 1" outlet powered by a 3/4-h.p., totally-enclosed 115/230-volt single-phase hi-speed motor (3450 RPM). Pump features all-iron construction, Viton seal and stainless steel shaft. Motor is double ball bearing design with type 56J motor frame. Motor totally enclosed for outdoor, dusty or dirty locations. May be used for: • Blending • Mixing • Seed Treating • Liquid Transfer Notes: Maximum 40 GPM at open discharge. See the Technical Pages for more information on repairs. | Part | Description | | AG707160 | Pump with 3/4-HP Motor | | AG706319 | Replacement Seal | | Ref | Part |Description | | 1 | AG513745 | Seal, Viton, 2" and 3" - 8 and 10HP | | 2 | AG703289 | Drain Plug | | 3 | AG703272 | Shaft Sleeve, 2" and 3", 8 and 10 HP | | 4 | AG703273 | O-Ring, Shaft, 2" and 3", 8 and 10 HP | | 5 | AG602787 | O-Ring Casing - EPDM | | 7 | AG704632 | Casing | | 8 | AG703270 | Flinger, 8 and 10 HP | | 9 | AG708943 | Impeller | Scot 2" Self-Priming Pump Heres a pump and motor combination that is recommended for general purpose use. All-iron construction and Viton fitted. Motor is 2-h.p. 3450 RPM TEFC. Note: See the Technical Pages for more information on repairs. | Part | Description | | AG711505 | 2" Pump, 1 Phase, 115/230 Volt | | AG711506 | 2" Pump, 3 Phase, 230/460 Volt | Scot Straight Centrifugal Pedestal Pumps Scot straight centrifugal pedestal-mount pumps offer the versatility to meet a wide variety of applications. May be driven by belt and pulley or direct-coupled using flex couplers. All-iron construction, Viton seal, and stainless steel shaft sleeve are just some of the features found on this high-quality pump. • All-Iron Construction • Cast Iron Housing • Double Sealed Ball Bearings • Hardened Iron Impeller • Stainless Steel Shaft Sleeve • Mechanical Seal Note: See the Technical Pages for more information on repairs. Shaft HP Req'd. at 3450 RPM PSI at Various GPM with 1.0 SG Liquid at 3450 RPM Size Dia. 1.0 SG 1.4 SG 50 100 200 300 350 Part No. 2" 7/8" 7-1/2 10 55 50 30 — — 704614D 3" 7/8" 10 15 55 54 49 38 20 704615D | Part | Description | | AG704614 | 2" Pump | | AG704615 | 3" Pump | Scot Self-Priming Pedestal Pump To operate, prime only once by removing plug-in top of pump head and fill priming chamber with liquid. A built-in check valve holds the initial prime for instant pumping from sump installations and prohibits back siphoning into the pump when stopped. A foot valve is not required. • All-Iron Construction • Stainless Steel Shaft Sleeve • Cast Iron Bearing Frame • Viton Seal • Double Sealed Ball Bearings Note: See the Technical Pages for more information on repairs. Shaft HP Req'd. at 3450 RPM PSI at Various GPM with 1.0 SG Liquid at 3450 RPM Size Dia. 1.0 SG 1.4 SG 50 100 200 300 350 2" 5/8" 2 3 30 20 — — — 3" 7/8" 7-1/2 10 50 48 40 30 15 | Part | Description | | AG704549 | 2" Pump | Pump Bases For mounting pumps and motors. (Not drilled.) | Part | Description | | AG312299 | Base, 7 Gauge, 16" x 26" | Flex Couplings Flex couplers are used to connect pump shaft to motor shaft. The rubber insert provides enough flex to compensate for slight misalignment and serves to absorb vibration. | Part | Description | | AG000602 | Spider Insert | | AG000608 | Coupler Half 1/2" | | AG000607 | Coupler Half 5/8" | | AG000606 | Coupler Half 3/4" | | AG000605 | Coupler Half 7/8" | | AG008731 | Coupler Half 15/16" | | AG000603 | Coupler Half 1" | | AG000604 | Coupler Half 1-1/8" | | AG000597 | Coupler Half 1-3/8" | Pumps 85
- Page 35 and 36: Switch Pro Switch Pro provides a st
- Page 37 and 38: SCS 440 and 450 Carrier Control Aut
- Page 39 and 40: SCS-Sidekick Direct Injection Syste
- Page 41 and 42: Raven Control Cables | Part | Descr
- Page 43 and 44: Calc-An-Acre II The Calc-An-Acre II
- Page 45 and 46: RFM60S Flowmeter RFM100 Repair Part
- Page 47 and 48: RFM400 Repair Parts Accu-Flow Kits
- Page 49 and 50: CCS100 Custom Control System Liquid
- Page 51 and 52: CCS100 Flow Sensor Provides informa
- Page 53 and 54: AA144A DirectoValve Repair Parts No
- Page 55 and 56: Raven ® Electric Shut-Off Valves 1
- Page 57 and 58: QC3-Stack Valves Stack up to 10 val
- Page 59 and 60: Polypropylene Union Ball Valve A qu
- Page 61 and 62: All Stainless Steel Valves A qualit
- Page 63 and 64: Centerline Butterfly Valves Notes:
- Page 65 and 66: ACE 150 Series Repair Parts Note: V
- Page 67 and 68: ACE FMC-HYD Repair Parts Repair Par
- Page 69 and 70: SpraCoupe Replacement Pump Ace's ne
- Page 71 and 72: PTO Belt Driven Pumps Cast iron 1-1
- Page 73 and 74: Hypro Series 9303P Pumps Hydraulica
- Page 75 and 76: 9000 Series Centrifugal Pump Repair
- Page 77 and 78: Torque Bar and Chain Anchors pump d
- Page 79 and 80: Hypro D135 Diaphragm Pump Hypro low
- Page 81 and 82: 6500 Series Roller Pump • Max flo
- Page 83 and 84: Hydraulically-Driven Pressure Washe
- Page 85: 12V Motor Speed Control Controller
- Page 89 and 90: Ace GE-Series Pumps Ace's GE-Series
- Page 91 and 92: Type 316 Stainless Steel Pedestal P
- Page 93 and 94: Pacer Hand Pump Heavy-duty, double-
- Page 95 and 96: GREEN XLPE for Chemical Transfer Fo
- Page 97 and 98: Dry Poppet Coupling Type B Female c
- Page 99 and 100: Viton Gaskets Note: AG009979 gasket
- Page 101 and 102: 45° and 90° Street Elbows Couplin
- Page 103 and 104: Coupling Flanged Y 45° Note: Full
- Page 105 and 106: Garden Hose Fittings Swivel Barbs M
- Page 107 and 108: 90° Elbows 45° St. Elbows Malleab
- Page 109 and 110: Type 304 Stainless Steel Fittings-
- Page 111 and 112: Air Couplings Allow fast, easy conn
- Page 113 and 114: Polypropylene “Y” Strainers •
- Page 115 and 116: Model 126 Strainers 1-1/4", 1-1/2",
- Page 117 and 118: Model 124 1-1/2" Strainer Parts Hyp
- Page 119 and 120: In-Line Strainer 3/4" NPT inlet, br
- Page 121 and 122: INSECTICIDES TEEJET CONTACT SYSTEMI
- Page 123 and 124: Spray Tips 121
- Page 125 and 126: Turbo TeeJet ® Spray Tips Typical
- Page 127 and 128: Turbo TwinJet ® Typical Applicatio
- Page 129 and 130: 80° XRVS TeeJet Spray Tips Caps fo
- Page 131 and 132: XRC Tip and Cap Combination Extende
- Page 133 and 134: Hypro Ultra Lo-Drift Nozzles The Ul
- Page 135 and 136: Hypro Guardian Spray Tips Guardian
Hydraulic Drive Scot Transfer Pump<br />
• All-Iron Construction<br />
• Viton Mechanical Seal<br />
• Stainless Steel Shaft Sleeve<br />
• Double-Sealed Ball Bearings<br />
• Hydraulic Motor<br />
• Precision Gerotor Design<br />
• Rugged Construction<br />
• Anti-Friction Bearings<br />
• High-Pressure Seals<br />
• Scots' 2" Model HYT200SP pump is self-priming and rated from 100<br />
to 125 GPM at 30 PSI. The hydraulic motor requires 7 GPM at 1000 to<br />
1500 PSI. Cast iron for rugged dependability with Viton seal, stainless<br />
steel shaft sleeve, and sealed ball bearings are all standard quality features.<br />
Note: See the Technical Pages for more information on repairs.<br />
| Part | Description |<br />
| AG707220 | Transfer Pump |<br />
Hydraulic Driven Banjo Poly Pumps<br />
Poly pumps are equipped with 12-HP Gresen<br />
motors. Motors are compatible with open or closed<br />
hydraulic systems that can deliver from 6 to 10 GPM.<br />
Note: Housing, Shaft, and Bearing fit both 2" and<br />
3" Pumps.<br />
Scot Sprayer Pumps<br />
Scot sprayer pumps are all iron construction<br />
for rugged performance. They have Viton seals<br />
and stainless steel shaft sleeves. They are<br />
available with several engine configurations<br />
including the new Industrial Plus (IP) unit from<br />
Briggs and Stratton shown here. It has most all<br />
the high-quality features found on the more<br />
expensive engines but is more economical!<br />
| Part | Description |<br />
| AG709043 | 1-1/2" x 1-1/4" Pump, 5.5-HP Honda |<br />
| AG712512 | 2" x 2" Pump, 8-HP Honda Electric Start |<br />
| AG715592 | Pump Only 2" x 2" |<br />
Scot Sprayer Pump Repair Kit<br />
Includes Viton Seal, shaft seal.<br />
| Part | Description |<br />
| AG704641 | Repair Kit For 5-HP Pumps |<br />
| AG709165 | Repair Kit For 8-HP Pumps |<br />
Repair <strong>Parts</strong> for Scot 1-1/2" x 1-1/4" Pump<br />
Pumps<br />
| Part | Description |<br />
| AG057602 | 2" Poly Pump |<br />
| AG057603 | 3" Poly Pump |<br />
| AG427311 | Hydraulic Pedestal Housing |<br />
| AG427312 | Adapter Shaft |<br />
| AG427313 | Bearing |<br />
Gas Engines<br />
Small engines from Honda and Briggs & Stratton. All have horizontal<br />
shafts in either the keyed or threaded shaft configuration.<br />
| Part | Description |<br />
| AG704597 | Engine 3 HP Briggs & |<br />
| | Stratton Threaded Shaft 5/8" x 18 |<br />
| AG426537 | Engine 3.5 HP Briggs & |<br />
| | Stratton Keyed Shaft 3/4" Diameter |<br />
| AG008333 | Engine 5.5 HP Honda 3/4" Keyed Shaft |<br />
| AG000674 | Engine 8 HP Briggs & |<br />
| | Stratton Keyed Shaft I" Dia |<br />
| AG008848 | Engine 8 HP Briggs & Stratton with |<br />
| | 6-1 Gear Reduction - 1" Dia Keyed Shaft |<br />
| AG710532 | Engine 8 HP Honda Keyed Shaft 1" Dia |<br />
| AG712036 | Engine 8 HP Honda |<br />
| | with Electric Start Keyed Shaft 1" Dia |<br />
| AG710531 | Engine 8 HP Honda Threaded Shaft 1" Dia. |<br />
| AG711991 | Engine 11 HP Honda with |<br />
| | Electric Start Keyed Shaft 1" Dia. |<br />
| Ref | Part |Description |<br />
| 1 | AG704568 | Seal, Buna, 2" - 3 and 5 HP |<br />
| 1 | AG704569 | Seal, Viton, 2" - 3 and 5 HP |<br />
| 2 | AG703289 | Drain Plug |<br />
| 3 | AG704630 | Shaft Sleeve |<br />
| 5 | AG602787 | O-Ring Casing - EPDM |<br />
| 7 | AG704633 | Case |<br />
| 8 | AG704571 | Flinger, 3 and 5 HP |<br />
| 9 | AG704638 | Impeller |<br />
| 10 | AG704582 | Adapter |<br />
84