Controllers - AGCO Parts

12V Motor Speed Control
Controller is ideal for use with Hypro's roller
pump/12V motor. Bypass plumbing can be
eliminated in many instances as the pump
can be controlled to deliver only the
required volume by regulating the speed of
the motor. Handles motors up to 36 amp.
Glycerin-filled gauge and 20' wiring harness
has extra set of leads that can be connected
to the boom on/off solenoid. This provides
simultaneous on/off control of pump
and boom.
| Part | Description |
| AG051729 | Speed Controller |
Roller Pump and 12V Motor
The Hypro 4101N-AH roller pump has 4-
rollers and comes with a Ni-Resist housing
made of high nickel content alloy for better
corrosion resistance. The system is ideal for
bulk chemical transfer, fertilizer placement, herbicide banding, nitrogen
side-dressing, and orchard and cattle spraying.
• Max. flow: 7.2 gpm • Max. pressure 50 PSI continuous
• Viton Seals
• Super Rollers
| Part | Description |
| AG009204 | Hypro Roller Pump & 12 Volt DC Motor |
| AG009457 | Motor Only, 12 Volt DC |
| AG050467 | Pump Only, 4101N-AH |
| AG006246 | Pump Repair Kit Super Rollers |
Oil Change System
Features:
• Remove dirty oil through dipstick tube
• Comes complete with all necessary hoses
and oil storage container
• Liquid temperatures from 40 °F185 °F
• Thermal overload protection
• Built-in reversible switch and 8' cable with
battery clips
• BUNA impeller
Note: Great for use with small engines!
| Part | Description |
| AG717771 | Oil Change System |
Engine-Driven Centrifugal Pumps
Cast iron pumps have nylon impeller, Viton
seal, and Briggs & Stratton or Honda
engine.
• 75 GPM at 40 PSI
• Maximum Flow Rate: 100 GPM
• Maximum Pressure: 70 PSI
Notes: 1-1/2" Inlet 1-1/4" Outlet. See the
Technical Pages for more information on
repairs.
| Part | Description |
| AG053712 | Pump, 5-HP B&S |
| AG053711 | Pump, 5.5-HP Honda |
Aqua-Tiger 12-Volt, Motor-Drive, Centrifugal
Pump
Hypros new, economical 9700B
Aqua-Tiger centrifugal pump is ideal
for agricultural and industrial transfer
of a variety of fluids and chemicals.
The pump is closed-coupled to a 12-
volt DC electric motor. The discharge
can be rotated in 90° increments for
ease in mounting. The fully-enclosed
ball bearing, ignition-protected motor
features a stainless steel shaft and permanent magnet design which
has a low amperage draw. Solid bronze construction with stainless steel
hardware and a Viton seal offer excellent corrosion resistance and durability.
Stainless Steel pump is also available.
The 9700B Aqua-Tiger is perfect for most applications where a flooded
intake is provided and low pressures are suitable. Applications include,
but are not limited to: general purpose liquid transfer, coolant circulation,
maintenance equipment and wash downs.
• Max. flow: 19 GPM
• Max. pressure: 7 PSI
• Ports: 3/4" NPT inlet; 3/4" NPT outlet
• Max. draw: 5.5 amps
| Part | Description |
| AG054213 | Pump with 12V Motor, Bronze |
| AG059928 | Pump with 12V Motor, Stainless Steel |
Scot Self-Priming Pump Repair Parts
| Ref | Part |Description |
| 1 | AG704568 | Seal, Buna, 2" - 3 and 5 HP |
| 1 | AG602760 | Seal, Buna, 2" and 3" - 8 and 10 HP |
| 1 | AG704569 | Seal, Viton, 2" - 3 and 5 HP |
| 1 | AG513745 | Seal, Viton, 2" and 3" - 8 and 10HP |
| 2 | AG704570 | Shim, 2", 3 and 5 HP |
| 2 | AG704584 | Shim, 2" and 3", 8 and 10 HP |
| 3 | AG557307 | 1/2" |
| 4 | AG704572 | Shaft Sleeve, 2", 3 and 5 HP |
| 4 | AG703273 | O-Ring, Shaft, 2" and 3", 8 and 10 HP |
| 4 | AG703272 | Shaft Sleeve, 2" and 3", 8 and 10 HP |
| 5 | AG704573 | O-Ring, Casing, 2", 3, 5 and 8 HP |
| 5 | AG602787 | O-Ring Casing - EPDM |
| 8 | AG708284 | Casing, 2", 3, 5 and 8 HP |
| 8 | AG711475 | Casing, 3", 10 HP |
| 9 | AG704577 | Impeller, 2", 3 and 5 HP |
| 9 | AG704587 | Impeller, 3", 10 HP |
| 10 | AG704578 | Adapter, 2", 3 and 5 HP |
| | AG704571 | Flinger, 3 and 5 HP |
| | AG703270 | Flinger, 8 and 10 HP |
Pumps
83