Controllers - AGCO Parts

Pumps
Hypro Roller Pumps
Hypro roller pumps are available in cast iron (C), Ni-resist (N), or the
super corrosion resistant Silver Series (XL) models. Shafts are stainless
steel and bearings are factory lubricated - so no greasing is required.
The Silver Series models are especially designed for use with highly
corrosive herbicides. Tests results indicate they can last up to 10 times
longer than cast iron models and three times longer than Ni-resist.
4000 Series Roller Pump
• 4-Roller Pump
• Max flow: 4001 9 GPM@1800 RPM
• Max flow: 4101 7GPM@2600RPM
• Max pressure: 150 PSI
• Rated speeds: 1800 rpm/2600rpm
• Shaft size: 5/8" Solid
• Port size: 3/4" NPT
• Max. fluid temp: 140 °F/60 °C
• Pump shaft rotation: CW (R) series
is CCW
• Weight: 5 lbs.
• Rollers Super rollers standard
• Shaft Seals Viton standard
| Part | Description |
| AG000221 | Roller Pump 4001 Cast Iron |
| AG844795 | Roller Pump 4001 Ni-Resist |
| AG053657 | Roller Pump 4001 XL |
| AG007096 | Roller Pump 4101 Cast Iron |
| AG845043 | Roller Pump 4101-R Cast Iron |
| AG842890 | Roller Pump 4101 Ni-Resist |
| AG053519 | Roller Pump 4101 XL |
| AG060203 | Roller Pump 4101 XL-R |
| AG841966 | Coupler 5/8" Hollow Shaft |
| AG051507 | Base Kit - Electric Motor (4001, 4101) |
| AG007289 | Base Kit - Gas Engine Drive (4101 Only) |
| AG006246 | Pump Repair Kit Super Rollers |
| AG005900 | Pump Repair Kit Polypropylene Rollers |
1502 Series Roller Pumps
• 1-1/2" Ports • 15/16" Shaft
• 6-Roller Pump• 33.1 GPM at 540
RPM
• 62.1 GPM at 1000 RPM
Note: C = Cast Iron; N = Ni-Resist;
*Ni-Resist = Nickel impregnated cast
iron.
| Part | Description |
| AG007590 | Pump Roller 1502C |
| AG007589 | Pump Roller 1502N |
| AG053411 | Pump Roller 1502XL |
| AG055425 | Pump Roller 1502XL-R |
| AG005697 | Poly Roller - 5 required |
| AG000366 | Bearing - 2 required |
| AG000330 | O-Ring |
| AG000372 | Viton Seal - 2 Required |
| AG007586 | Repair Kit 1500 |
1700 Series Roller Pumps
• 1" NPT Ports • 15/16" Shaft
• 5-Roller Pump • Max 45 GPM
• Max 200 PSI
Notes: Repair kit includes rollers, seals
and o-ring. R - Clockwise rotation.
| Part | Description |
| AG000218 | 1700 Cast Iron |
| AG054841 | 1700-R Cast Iron |
| AG000219 | 1700 Ni-Resist |
| AG053899 | 1700-R Ni-Resist |
| AG052007 | 1700XL |
| AG000464 | 1700 Repair Kit |
| AG005697 | Poly Roller - 5 required |
| AG000366 | Bearing - 2 required |
| AG000340 | O-Ring |
| AG000372 | Viton Seal - 2 Required |
78