Controllers - AGCO Parts

Torque Bar and Chain
Anchors pump directly on PTO rather than with
solid base. Keeps the pump from turning with
the shaft.
| Part | Description |
| AG005266 | Torque Bar and Chain |
Quick Coupler for 1000 RPM
| Part | Description |
| AG002126 | Quick Coupler for 1-3/8" PTO |
| AG002839 | Quick Coupler for 1-3/4" PTO |
Dual Speed Coupler
Fits either 540 or 1000 RPM 1-3/8" PTO
shafts. Allows quick and simple slip-on,
slip-off installation of a pump to a tractor
PTO shaft. Just pull collar back and slide
on or slide off. The coupler is secured to
the pump shaft with allen head set screw.
Made of corrosion-resistant cast aluminum
and the collar is made of super tough
nylon, color-coded International orange.
| Part | Description |
| AG009674 | Coupler, 5/8" |
| AG009676 | Coupler, 15/16" |
Severe Service Coupler
Reduces the chances of vibration because it clamps
a full 360° on a pump shaft and tractor PTO shaft.
Made of durable steel. 15/16" pump shaft and made
for either 1-3/8" or 1-3/4" 1,000 RPM PTO.
| Part | Description |
| AG008723 | Coupler, 1-3/8", 1000 RPM |
| AG009202 | Coupler, 1-3/4", 1000 RPM |
Pump Oil
1 quart of Hypro Pump Oil.
Hypro ® D813 Diaphragm Pumps
Hypro high pressure diaphragm
pumps are recommended for spraying
of herbicides, pesticides, liquid fertilizers
and many other hard to handle fluids.
Low-cost maintenance and almost
wear-free operation make these
pumps ideal for a wide variety of
spraying jobs.Pressure and output are
designed for optimum performance of medium to large-sized sprayers.
Hypro high pressure diaphragm pumps are supplied with single or double-splined
through-shafts. Pumps include pulsation dampeners.
Performance Information:
• Max. flow: 21.4 gpm/81 lpm
• Max. pressure: 725 PSI/50 bar
• Max. rated speed: 550 rpm (D813); 3600 rpm (D813GRGI)
• Max. fluid temperature: 140 °F/60 °C
Other Attributes:
• Port sizes: 1-1/4" HB inlet, 3/4" (M)NPT outlet
• Shaft: Flanged adapter and 1-3 8"- 6 splined male shaft ext.(D813); 1"
hollow shaft for gas-engine mount (D813GRGI)
• Pump shaft rotation: CW and CCW
• Housing: anodized aluminum
• Diaphragms: 3, semi-hydraulic
• Mounting base included
• Weight: 50 lbs./22.7 kg (D813); 66 lbs./30 kg (D813GRGI)
Note: High Pressure.
| Part | Description |
| AG058781 | 9910-D813 Pump |
| AG050854 | Control Unit |
| AG009460 | Gear Reduction Only |
| AG009038 | Gear Reduction Kit D50 |
Hypro Series D252
Diaphragm Pumps
Diaphragm pumps are lightweight,
compact, self-priming, and require less
horsepower compared to other pump
types with similar flow and pressure
ratings. Models which require pulsation
dampening have the dampeners built
onto the manifold. Like piston pumps,
diaphragm pumps are positive displacement;
output remains constant
with pump speed.
Recommended for spraying herbicides and fertilizers both pre-emerge
and post-emerge. Drive section of pump runs in oil for smooth, maintenance-free
performance. Wetted pump parts are epoxy-coated for
superior corrosion resistance.
• Ports: 3/4" Inlet, 1/2" Outlet, and 5/8" By-pass
• Maximum Speed: 650 RPM
• Weight: 14 lbs. Gear Reduction for Engine Drive
• The Series 19 Pump, when coupled directly to a small engine
becomes a compact efficient sprayer unit; Engine sold separately
Notes: Medium pressure. Max Pressure 290 PSI Max Flow 6 GPM.
Pumps
| Part | Description |
| AG057486 | Hypro Pump Oil - Quart |
| Part | Description |
| AG059176 | Pump D252 with Control |
| AG725996 | D252 Pump Only |
| AG009461 | Control Unit |
| AG009583 | Diaphragm Repair Kit |
75