Controllers - AGCO Parts

9600C Turbine Pump
The 9600C turbine is a direct drive,
1,000 RPM PTO pump that is economical
and durable for high-volume
spraying or liquid transfer applications.
It has large 1½" ports, 15/16"
shaft with 1/4" keyway and heavyduty
sealed bearings. The pump has
a heavy-duty cast iron body and
glass-filled Valox impeller for excellent
wear resistance. The shaft is
stainless steel and the lip seals are
Viton for corrosion protection. Heavy-duty sealed bearings are used for
longer life in agricultural applications. #50 mesh strainer is recommended
for pump inlet. See index for section on strainers. Weight 23 lbs.
Note: PTO Coupler sold separately.
PSI 20 30 40 50 60 70 80
RPM GPM HP GPM HP GPM HP GPM HP GPM HP GPM HP GPM HP
800 44 2.0 31 2.4 19 3.0
1000 65 3.0 57 3.6 46 4.0 35 4.9 28 5.7 19 6.5
1200 88 4.4 78 5.1 73 5.6 63 6.6 55 7.3 47 8.2 40 9.1
| Part | Description |
| AG052636 | 9600C Pump |
| AG052985 | Repair Kit |
| AG052998 | Torque Arm and Chain |
Delavan Turbo 90 Pump
The Delavan Turbo 90 pump is designed to
operate directly from a 1000 RPM PTO without
attachments and will pump suspended materials
without accumulation like a conventional turbine
pump. It can be used for large quantity liquid
transfer or high volume sprayer applications. A
glass-reinforced nylon impeller is designed to
reduce corrosion and increase pump life with
less rotation weight. The high capacity allows sufficient bypass flow to
maintain maximum agitation. Large 1-1/2" inlet and outlet ports permit
high-volume unrestricted flow.
Notes: A high-capacity strainer with a 20-mesh screen must be used
on the inlet side. Failure to do so could void warranty.
| Part | Description |
| AG002101 | Turbo 90, Pump with Lip Seal |
Turbo 90 Repair Kit
Note: Repair kit includes 1 gasket, 2 seals, and 2 seal supports.
| Part | Description |
| AG002108 | Repair Kit, Includes Lip Seal for Standard Duty |
| AG006878 | Repair Kit, Includes Face Seals for Abrasive Liquids |
Delavan Turbo 90 Pump Repair Parts
Pumps
9600C Turbine Pump Repair Parts
| Ref | Part |Description |
| 3 | AG052994 | Impeller Insert |
| 4 | AG052993 | Shaft |
| 5 | AG052992 | Impeller 9600C |
| 6 | AG052991 | Key |
| 7 | AG052990 | Gasket |
| 8 | AG052989 | Retainer External |
| 9 | AG005898 | Retaining Ring |
| 10 | AG000366 | Bearing - 2 required |
| 11 | AG000372 | Viton Seal - 2 Required |
| 12 | AG052988 | Bearing Cover |
| 14 | AG006504 | Drain Plug Casing |
| 15 | AG052986 | Decal |
| Ref | Part |Description |
| 6 | AG002838 | Gasket |
| 7 | AG002826 | Seal Ring |
| 10 | AG006878 | Repair Kit, Includes Face Seals |
| | |for Abrasive Liquids |
| 11 | AG006428 | Seal Support |
| 13 | AG005331 | Impeller Assembly Nylon |
| 13 | AG006588 | Hub, Impeller |
| 13 | AG006587 | Impeller Only Less Hub |
| 15 | AG002835 | Snap Ring, Internal |
| 16 | AG002836 | Dust Shield |
| 17 | AG000366 | Bearing - 2 required |
| 19 | AG002134 | Snap Ring, External |
| 21 | AG002135 | Shaft |
| 22 | AG006425 | Pipe Plug, Square Head |
74