Controllers - AGCO Parts
Controllers - AGCO Parts Controllers - AGCO Parts
Pumps ACE 150 Series Pumps Pressure (psi) 120 100 80 60 40 20 FMC-150-HYD-206 Flow (lpm) 0 100 200 300 400 500 6.2 GPM OIL 5.6 GPM OIL 4.8 GPM OIL 0 0 0 20 40 60 80 100 120 140 Flow (gpm) 8 7 6 5 4 3 2 1 Pressure (bar) 150 Series High Performance. Features: • 1-1/2" Suction 1-1/4" Discharge • F model equipped with NPT ports and industry standard flanged connections • FS Model constructed of 316 Stainless Steel with NPT ports and industry standard flanged connections • SP Model is self-priming making it perfect for load and spray applications • Provides higher pressure and greater volume for applications with large tanks and longer spray booms • The 206 motor requires 7 GPM maximum hydraulic fluid input and fits virtually all tractor hydraulic systems Recommended for: • Pressure compensating closed center systems • Load sensing closed center systems • Open center systems up to 16 gpm using internal needle bypass | Part | Description | | AG051612 | Pump FMC-150-HYD-206 with Valox Impeller | | AG056370 | Pump FMC-150-HYD-206 with Iron Impeller | | AG427514 | Pump FMC-150-HYD-206N | | | with Iron Impeller and Silicon Carbide seals | | AG053328 | Pump Less Motor - FMC-150-HYD-206 | | | with Valox Impeller | | AG426875 | Pump FMC-150F-HYD-206 | | AG426876 | Pump FMC-150FS-HYD-206 | | AG426877 | Pump FMC-150SP-HYD-206 | Pressure (psi) 120 100 80 60 40 20 FMC-150F-HYD-206 Flow (lpm) 0 100 200 300 400 500 6.5 GPM OIL 5.8 GPM OIL 5 GPM OIL 0 0 20 40 60 80 100 120 140 Flow (gpm) 8 7 6 5 4 3 2 1 0 Pressure (bar) Pressure (psi) 120 100 80 60 40 20 FMC-150SP-HYD-206 Flow (lpm) 0 80 160 240 320 400 480 7.1 GPM OIL 6.3 GPM OIL 5.5 GPM OIL 0 0 0 20 40 60 80 100 120 Flow (gpm) 8 7 6 5 4 3 2 1 Pressure (bar) 62
ACE 150 Series Repair Parts Note: Volutes are interchangeable with other 150 models. | Ref | Part |Description | | NS | AG052459 | Repair Kit - Includes Viton mechanical seal, | | | |washer, and O-Ring | | NS | AG058134 | Repair Kit - Includes Silicon Carbide | | | |mechanical seal, washer, and O-Ring | | NS | AG058721 | Repair Kit for 200-L Series Motor | | 1 | AG551627 | Pipe Plug 1/8" - NPT | | 2 | AG051449 | Volute - Standard | | 2 | AG427079 | Volute - Flanged | | 3 | AG000036 | Nut 3/8" Hex SS | | 4 | AG058969 | Washer SS | | 5 | AG057116 | Impeller, Valox | | 5 | AG051596 | Impeller - Cast Iron - Optional | | 6 | AG000015 | Seal Viton - Standard | | 6 | AG009556 | Seal Silicone Carbide - Optional | | 6A | AG000016 | O-Ring - Shaft | | 7 | AG051592 | O-Ring | | 8 | AG051614 | Mounting Frame | | 9 | AG000071 | Screw 3/8" x 3/4" | | 10 | AG000080 | Slinger | | 11 | AG000060 | Snap Ring - Internal | | 12 | AG000355 | Bearing - 2 Required | | 13 | AG000058 | Snap Ring - External | | 14 | AG050603 | Spacer | | 16 | AG002738 | Shaft SS | | 17 | AG051613 | Model 206 Motor Assy 7 GPM | | 18 | AG059177 | Seal Support Spacer for 200 Series | | 19 | AG426720 | Model 206N Motor 7 GPM | | 20 | AG426723 | Cap Screw | | 21 | AG426725 | O-Ring | | 22 | AG426726 | Reverse check valve | | 23 | AG426727 | Adapter, Restrictor body | | 24 | AG426728 | O-Ring | | 25 | AG426730 | Orifice, Restrictor 206N/210N | | 26 | AG427090 | Flow Limiter LS-206N | Pumps 63
- Page 13 and 14: Vertical Bulk Storage Tanks Ace-ROT
- Page 15 and 16: Pallet Paks Pallet Pak units are de
- Page 17 and 18: Cradles and Bands for Round Horizon
- Page 19 and 20: Cone Bottom Tanks Cone Bottom Tanks
- Page 21 and 22: Safety Tank FDA approved, 9-gallon,
- Page 23 and 24: Banjo Tank Fittings Double threaded
- Page 25 and 26: Falcon ® II Controller The Falcon
- Page 27 and 28: Envizio PRO The Envizio Pro multi-f
- Page 29 and 30: CAN SmarTrax/SmarTrax 3D CAN SmarTr
- Page 31 and 32: AutoBoom CAN UltraGlide AutoBoom Ul
- Page 33 and 34: SmartBoom Ravens SmartBoom is a sim
- Page 35 and 36: Switch Pro Switch Pro provides a st
- Page 37 and 38: SCS 440 and 450 Carrier Control Aut
- Page 39 and 40: SCS-Sidekick Direct Injection Syste
- Page 41 and 42: Raven Control Cables | Part | Descr
- Page 43 and 44: Calc-An-Acre II The Calc-An-Acre II
- Page 45 and 46: RFM60S Flowmeter RFM100 Repair Part
- Page 47 and 48: RFM400 Repair Parts Accu-Flow Kits
- Page 49 and 50: CCS100 Custom Control System Liquid
- Page 51 and 52: CCS100 Flow Sensor Provides informa
- Page 53 and 54: AA144A DirectoValve Repair Parts No
- Page 55 and 56: Raven ® Electric Shut-Off Valves 1
- Page 57 and 58: QC3-Stack Valves Stack up to 10 val
- Page 59 and 60: Polypropylene Union Ball Valve A qu
- Page 61 and 62: All Stainless Steel Valves A qualit
- Page 63: Centerline Butterfly Valves Notes:
- Page 67 and 68: ACE FMC-HYD Repair Parts Repair Par
- Page 69 and 70: SpraCoupe Replacement Pump Ace's ne
- Page 71 and 72: PTO Belt Driven Pumps Cast iron 1-1
- Page 73 and 74: Hypro Series 9303P Pumps Hydraulica
- Page 75 and 76: 9000 Series Centrifugal Pump Repair
- Page 77 and 78: Torque Bar and Chain Anchors pump d
- Page 79 and 80: Hypro D135 Diaphragm Pump Hypro low
- Page 81 and 82: 6500 Series Roller Pump • Max flo
- Page 83 and 84: Hydraulically-Driven Pressure Washe
- Page 85 and 86: 12V Motor Speed Control Controller
- Page 87 and 88: Repair Parts for Scot 2" Pump Scot
- Page 89 and 90: Ace GE-Series Pumps Ace's GE-Series
- Page 91 and 92: Type 316 Stainless Steel Pedestal P
- Page 93 and 94: Pacer Hand Pump Heavy-duty, double-
- Page 95 and 96: GREEN XLPE for Chemical Transfer Fo
- Page 97 and 98: Dry Poppet Coupling Type B Female c
- Page 99 and 100: Viton Gaskets Note: AG009979 gasket
- Page 101 and 102: 45° and 90° Street Elbows Couplin
- Page 103 and 104: Coupling Flanged Y 45° Note: Full
- Page 105 and 106: Garden Hose Fittings Swivel Barbs M
- Page 107 and 108: 90° Elbows 45° St. Elbows Malleab
- Page 109 and 110: Type 304 Stainless Steel Fittings-
- Page 111 and 112: Air Couplings Allow fast, easy conn
- Page 113 and 114: Polypropylene “Y” Strainers •
ACE 150 Series Repair <strong>Parts</strong><br />
Note: Volutes are interchangeable with other 150 models.<br />
| Ref | Part |Description |<br />
| NS | AG052459 | Repair Kit - Includes Viton mechanical seal, |<br />
| | |washer, and O-Ring |<br />
| NS | AG058134 | Repair Kit - Includes Silicon Carbide |<br />
| | |mechanical seal, washer, and O-Ring |<br />
| NS | AG058721 | Repair Kit for 200-L Series Motor |<br />
| 1 | AG551627 | Pipe Plug 1/8" - NPT |<br />
| 2 | AG051449 | Volute - Standard |<br />
| 2 | AG427079 | Volute - Flanged |<br />
| 3 | AG000036 | Nut 3/8" Hex SS |<br />
| 4 | AG058969 | Washer SS |<br />
| 5 | AG057116 | Impeller, Valox |<br />
| 5 | AG051596 | Impeller - Cast Iron - Optional |<br />
| 6 | AG000015 | Seal Viton - Standard |<br />
| 6 | AG009556 | Seal Silicone Carbide - Optional |<br />
| 6A | AG000016 | O-Ring - Shaft |<br />
| 7 | AG051592 | O-Ring |<br />
| 8 | AG051614 | Mounting Frame |<br />
| 9 | AG000071 | Screw 3/8" x 3/4" |<br />
| 10 | AG000080 | Slinger |<br />
| 11 | AG000060 | Snap Ring - Internal |<br />
| 12 | AG000355 | Bearing - 2 Required |<br />
| 13 | AG000058 | Snap Ring - External |<br />
| 14 | AG050603 | Spacer |<br />
| 16 | AG002738 | Shaft SS |<br />
| 17 | AG051613 | Model 206 Motor Assy 7 GPM |<br />
| 18 | AG059177 | Seal Support Spacer for 200 Series |<br />
| 19 | AG426720 | Model 206N Motor 7 GPM |<br />
| 20 | AG426723 | Cap Screw |<br />
| 21 | AG426725 | O-Ring |<br />
| 22 | AG426726 | Reverse check valve |<br />
| 23 | AG426727 | Adapter, Restrictor body |<br />
| 24 | AG426728 | O-Ring |<br />
| 25 | AG426730 | Orifice, Restrictor 206N/210N |<br />
| 26 | AG427090 | Flow Limiter LS-206N |<br />
Pumps<br />
63