Controllers - AGCO Parts
Controllers - AGCO Parts Controllers - AGCO Parts
Valves Poly Ball Valves - In Line Style Banjo ball valves are precision molded in polypropylene and reinforced with fiberglass for extra strength. Self-aligning ball moves freely against Teflon seats for smooth operation. Viton O-ring and stem seal permit use with all agricultural fertilizers and chemicals. Fasteners are stainless steel. Maximum 100 PSI. Note: See Technical section for repair parts. | Part | Description | | AG000904 | 1/2" Poly FF Valve | | AG513724 | 3/4" Poly FF Valve* | | AG000906 | 1" Poly Valve | | AG000832 | 1" Poly FF Valve | | AG000946 | 1-1/4" Poly Valve | | AG006437 | 1-1/4" Poly FF Valve** | | AG513722 | 1-1/2" Poly FF Valve** | | AG513721 | Bolted Poly Ball Valve 2 inch (F)NPT | | AG056146 | 2" Poly FF Valve* (4-bolt) | | AG513859 | 2" Poly FF Valve** (6-bolt) | | AG513719 | 3" Poly Valve* | | AG005492 | 3" Poly FF Valve* | | AG055297 | 4" Poly Valve | | AG051965 | Handle Locking Device for Above Valves* | | AG053051 | Handle Locking Device for Above Valves** | Handle Risers for Banjo Valves These risers will extend the handle from the ball valve to give more space between the valve and the handle. | Part | Description | | AG426506 | Riser 3/4", 1" 3-way Ball Valves | | AG426507 | Riser 1" FP, 1-1/4" SP and 1" 3-way SL Valves | | AG426507 | Riser 1" FP, 1-1/4" SP and 1" 3 BL Valves | | AG426508 | Riser 1-1/4" and 1-1/2" 3-way BL Valves | | AG426509 | Riser 1-1/4" FP - 2" SP 1-1/4" | | | and 1-1/2" 3-way SL Valves | | AG426510 | Riser 2" and 3" 3-way BL Valves | | AG426511 | Riser 2" FP and 2" 3-way SL Valves | Poly Ball Valves - Hose End Style Poly Ball Valve Handles | Part | Description | | AG002428 | Handle for 1/2", 3/4", 1" Valves | | AG000996 | Handle for 1" FF, 1-1/4" Valves | | AG000782 | Handle for 1-1/4" FF, 1-1/2", 2" Valves | | AG514194 | Handle for 1-1/2", 2" Angle Valves | | AG514195 | Handle for 2" FF Angle Valves | | AG000796 | Handle for 2" FF, 3", 3" FF and 4" Valves | Poly Ball Valve Repair Kits Note: Valve repair kits include: ball, ball seats, body O-rings, upper stem bushing, thrust washer, and stem O-ring. | Part | Description | | AG053968 | Repair Kit for1/2", 3/4" and 1" Valves | | AG006570 | Repair Kit for 1" FF and 1-1/4" Valves | | AG056059 | Repair Kit for 1-1/4" FF, 1-1/2" and 2" Valves | | AG055789 | Repair Kit for 2" FF Valves | | AG054187 | Repair Kit for 3" Valves | | AG056057 | Repair Kit for 3" FF Valves | | AG056056 | Repair Kit for 4" Valves | Stainless Steel Brackets For mounting bolted poly valves straight or angle sizes 1-1/4" F.F. through 3" F.F. | Part | Description | | AG056243 | Bracket for In-Line Valves | | AG056244 | Bracket for Angle Valves | 1" Nozzle Extension The 1" polypropylene nozzle extension can be attached to any 1" valve. It is designed to be used with today's bulk chemical transfer systems. | Part | Description | | AG051191 | 1" Nozzle Extension | 1" Poly Nozzle Valve Valve is ideal for handling corrosive fluids. Maximum pressure 75 PSI and 40 GPM. | Part | Description | | AG000836 | 1-1/2" FF Poly Valve | | AG513688 | 2" FF Poly Valve | | AG000837 | 2" Poly Valve | | AG000975 | Nozzle Extension Only, 1-1/2" x 8" | | AG005263 | Nozzle Extension Only, 2" x 8" | | Part | Description | | AG051851 | 1" Poly Nozzle Valve | 56
Polypropylene Union Ball Valve A quality ball valve at an economical price. The single union valve is constructed of all polypropylene, has Teflon seats, and EPDM O-rings to provide excellent resistance to most ag chemicals. They are non-restricted full-flow valves that can withstand pressures up to 100 PSI. Note: See Technical pages for repair parts. | Part | Description | | AG050204 | 1/2"Poly Valve | | AG050205 | 3/4" Poly Valve | | AG050206 | Union Ball Valve 1 inch FNPT | | AG050207 | 1-1/4" Poly Valve | | AG050208 | 1-1/2" Poly Valve | | AG050209 | Union Ball Valve 2 inch FNPT | Stubby Valve - Model VSFMT-200/204 | Part | Description | | AG054332 | 2" Adapter x 2" MNPT Valve (1-1/2" Port) | | AG726096 | 2" Adapter x 2" MNPT Valve (Full Flow) | Stubby Valve - Model VS-204FP Stubby Valve TM - Model VSF-200/204 The “stubby valve” is designed to eliminate unnecessary pipe fittings, and because it is compact, it can be used in areas where other valve assemblies will not fit. Features: • Glass-filled polypropylene • All Teflon seals • Stainless steel bolts • Unique compact design • Lightweight • Four design options | Part | Description | | AG054330 | 2" Adapter x 2" FNPT Valve (1-1/2" Port) | | AG726097 | 2"Adapter x 2" FNPT Valve (Full Flow) | Stubby Valve - Model VSMT-200/204 | Part | Description | | AG059554 | 2" x 2" (F)NPT | Stubby Valve - Model VSMT-300 Features: • 100 Max PSI • Stainless Steel bolts • Glass-filled Polypropylene • FKM (viton type) body seals • 2-1/2" Opening thru ball | Part | Description | | AG427262 | 3" Manifold Flange x 3" Male NPT | Valve 2" Manifold Valves | Part | Description | | AG054331 | 2" MNPT x 2" FNPT Valve (1-1/2" Port) | | AG058578 | 2" MNPT x 2" FNPT Valve (Full Flow) | | Part | Description | | AG426518 | Valve 2 inch Manifold | 57
- Page 7 and 8: Foam Tank Cleaner Ag-Chem foam tank
- Page 9 and 10: Gauge Adapter Brass 1/8"(M) x 1/4"(
- Page 11 and 12: Manual Booms The Mec Series is a ma
- Page 13 and 14: Vertical Bulk Storage Tanks Ace-ROT
- Page 15 and 16: Pallet Paks Pallet Pak units are de
- Page 17 and 18: Cradles and Bands for Round Horizon
- Page 19 and 20: Cone Bottom Tanks Cone Bottom Tanks
- Page 21 and 22: Safety Tank FDA approved, 9-gallon,
- Page 23 and 24: Banjo Tank Fittings Double threaded
- Page 25 and 26: Falcon ® II Controller The Falcon
- Page 27 and 28: Envizio PRO The Envizio Pro multi-f
- Page 29 and 30: CAN SmarTrax/SmarTrax 3D CAN SmarTr
- Page 31 and 32: AutoBoom CAN UltraGlide AutoBoom Ul
- Page 33 and 34: SmartBoom Ravens SmartBoom is a sim
- Page 35 and 36: Switch Pro Switch Pro provides a st
- Page 37 and 38: SCS 440 and 450 Carrier Control Aut
- Page 39 and 40: SCS-Sidekick Direct Injection Syste
- Page 41 and 42: Raven Control Cables | Part | Descr
- Page 43 and 44: Calc-An-Acre II The Calc-An-Acre II
- Page 45 and 46: RFM60S Flowmeter RFM100 Repair Part
- Page 47 and 48: RFM400 Repair Parts Accu-Flow Kits
- Page 49 and 50: CCS100 Custom Control System Liquid
- Page 51 and 52: CCS100 Flow Sensor Provides informa
- Page 53 and 54: AA144A DirectoValve Repair Parts No
- Page 55 and 56: Raven ® Electric Shut-Off Valves 1
- Page 57: QC3-Stack Valves Stack up to 10 val
- Page 61 and 62: All Stainless Steel Valves A qualit
- Page 63 and 64: Centerline Butterfly Valves Notes:
- Page 65 and 66: ACE 150 Series Repair Parts Note: V
- Page 67 and 68: ACE FMC-HYD Repair Parts Repair Par
- Page 69 and 70: SpraCoupe Replacement Pump Ace's ne
- Page 71 and 72: PTO Belt Driven Pumps Cast iron 1-1
- Page 73 and 74: Hypro Series 9303P Pumps Hydraulica
- Page 75 and 76: 9000 Series Centrifugal Pump Repair
- Page 77 and 78: Torque Bar and Chain Anchors pump d
- Page 79 and 80: Hypro D135 Diaphragm Pump Hypro low
- Page 81 and 82: 6500 Series Roller Pump • Max flo
- Page 83 and 84: Hydraulically-Driven Pressure Washe
- Page 85 and 86: 12V Motor Speed Control Controller
- Page 87 and 88: Repair Parts for Scot 2" Pump Scot
- Page 89 and 90: Ace GE-Series Pumps Ace's GE-Series
- Page 91 and 92: Type 316 Stainless Steel Pedestal P
- Page 93 and 94: Pacer Hand Pump Heavy-duty, double-
- Page 95 and 96: GREEN XLPE for Chemical Transfer Fo
- Page 97 and 98: Dry Poppet Coupling Type B Female c
- Page 99 and 100: Viton Gaskets Note: AG009979 gasket
- Page 101 and 102: 45° and 90° Street Elbows Couplin
- Page 103 and 104: Coupling Flanged Y 45° Note: Full
- Page 105 and 106: Garden Hose Fittings Swivel Barbs M
- Page 107 and 108: 90° Elbows 45° St. Elbows Malleab
Valves<br />
Poly Ball Valves - In Line Style<br />
Banjo ball valves<br />
are precision molded<br />
in polypropylene and reinforced<br />
with fiberglass for extra strength.<br />
Self-aligning ball moves freely<br />
against Teflon seats for smooth operation.<br />
Viton O-ring and stem seal permit<br />
use with all agricultural fertilizers<br />
and chemicals. Fasteners are stainless<br />
steel. Maximum 100 PSI.<br />
Note: See Technical section for repair parts.<br />
| Part | Description |<br />
| AG000904 | 1/2" Poly FF Valve |<br />
| AG513724 | 3/4" Poly FF Valve* |<br />
| AG000906 | 1" Poly Valve |<br />
| AG000832 | 1" Poly FF Valve |<br />
| AG000946 | 1-1/4" Poly Valve |<br />
| AG006437 | 1-1/4" Poly FF Valve** |<br />
| AG513722 | 1-1/2" Poly FF Valve** |<br />
| AG513721 | Bolted Poly Ball Valve 2 inch (F)NPT |<br />
| AG056146 | 2" Poly FF Valve* (4-bolt) |<br />
| AG513859 | 2" Poly FF Valve** (6-bolt) |<br />
| AG513719 | 3" Poly Valve* |<br />
| AG005492 | 3" Poly FF Valve* |<br />
| AG055297 | 4" Poly Valve |<br />
| AG051965 | Handle Locking Device for Above Valves* |<br />
| AG053051 | Handle Locking Device for Above Valves** |<br />
Handle Risers for Banjo Valves<br />
These risers will extend the handle from the ball valve to give more<br />
space between the valve and the handle.<br />
| Part | Description |<br />
| AG426506 | Riser 3/4", 1" 3-way Ball Valves |<br />
| AG426507 | Riser 1" FP, 1-1/4" SP and 1" 3-way SL Valves |<br />
| AG426507 | Riser 1" FP, 1-1/4" SP and 1" 3 BL Valves |<br />
| AG426508 | Riser 1-1/4" and 1-1/2" 3-way BL Valves |<br />
| AG426509 | Riser 1-1/4" FP - 2" SP 1-1/4" |<br />
| | and 1-1/2" 3-way SL Valves |<br />
| AG426510 | Riser 2" and 3" 3-way BL Valves |<br />
| AG426511 | Riser 2" FP and 2" 3-way SL Valves |<br />
Poly Ball Valves - Hose End Style<br />
Poly Ball Valve Handles<br />
| Part | Description |<br />
| AG002428 | Handle for 1/2", 3/4", 1" Valves |<br />
| AG000996 | Handle for 1" FF, 1-1/4" Valves |<br />
| AG000782 | Handle for 1-1/4" FF, 1-1/2", 2" Valves |<br />
| AG514194 | Handle for 1-1/2", 2" Angle Valves |<br />
| AG514195 | Handle for 2" FF Angle Valves |<br />
| AG000796 | Handle for 2" FF, 3", 3" FF and 4" Valves |<br />
Poly Ball Valve Repair Kits<br />
Note: Valve repair kits include: ball, ball seats,<br />
body O-rings, upper stem bushing, thrust washer,<br />
and stem O-ring.<br />
| Part | Description |<br />
| AG053968 | Repair Kit for1/2", 3/4" and 1" Valves |<br />
| AG006570 | Repair Kit for 1" FF and 1-1/4" Valves |<br />
| AG056059 | Repair Kit for 1-1/4" FF, 1-1/2" and 2" Valves |<br />
| AG055789 | Repair Kit for 2" FF Valves |<br />
| AG054187 | Repair Kit for 3" Valves |<br />
| AG056057 | Repair Kit for 3" FF Valves |<br />
| AG056056 | Repair Kit for 4" Valves |<br />
Stainless Steel Brackets<br />
For mounting bolted poly valves straight<br />
or angle sizes 1-1/4" F.F. through 3" F.F.<br />
| Part | Description |<br />
| AG056243 | Bracket for In-Line Valves |<br />
| AG056244 | Bracket for Angle Valves |<br />
1" Nozzle Extension<br />
The 1" polypropylene nozzle extension can be<br />
attached to any 1" valve. It is designed to be used<br />
with today's bulk chemical transfer systems.<br />
| Part | Description |<br />
| AG051191 | 1" Nozzle Extension |<br />
1" Poly Nozzle Valve<br />
Valve is ideal for handling corrosive<br />
fluids. Maximum pressure 75 PSI<br />
and 40 GPM.<br />
| Part | Description |<br />
| AG000836 | 1-1/2" FF Poly Valve |<br />
| AG513688 | 2" FF Poly Valve |<br />
| AG000837 | 2" Poly Valve |<br />
| AG000975 | Nozzle Extension Only, 1-1/2" x 8" |<br />
| AG005263 | Nozzle Extension Only, 2" x 8" |<br />
| Part | Description |<br />
| AG051851 | 1" Poly Nozzle Valve |<br />
56