Controllers - AGCO Parts
Controllers - AGCO Parts Controllers - AGCO Parts
Valves AA144P DirectoValve ® Control Valve The AA144P high-pressure solenoid-operated DirectoValve was specifically designed to provide a remote on/off boom control for agricultural and turf sprayers. It is powered by the rigs 12-volt DC electrical system and is direct acting with large internal flow chambers, thereby making it suitable for wettable powder applications. The unit is compatible with the spraying systems sprayer controls. Features Include: • Operating pressure range 0 to 100 PSI • Two 3/4" FNPT inlet connections to provide continuous bypass flow • 1/2" FNPT outlet to spray line • Large flow capacities - only 5 PSI pressure drop with 10 GPM flow • Mounting slot for 6mm hex bolt (bolt not included) • Nylon encapsulated 12 VDC coil with recessed 1/4" quick connect terminals power requirement 2.5 amp • Excellent corrosion resistance • Polypropylene valve body • Internal metal parts are stainless steel • Chemical resistant Viton seat washer and diaphragms • Solenoid requires no adjustment Note: Repair Kit includes: Spring, 2 Diaphragms, and Seat Washer. | Part | Description | | AG056424 | 144P-1 Single Valve | | AG056425 | 144P-2 Two Valve Assembly | | AG056426 | 144P-3 Three Valve Assembly | | AG056427 | AA144P Repair Kit for Single Valve | AA144P DirectoValve Repair Parts Note: *Repair Kit Items. AA144P 3-Way DirectoValve AA144P-1-3 DirectoValve Metered Bypass Solenoid Control Valve. The 144P-1-3 three-way solenoid-operated DirectoValve control valve was specifically designed to provide bypass control in spraying applications. When used with part number 23520-PP throttling valve or a CP4916 metering orifice plate in the bypass line, it can provide for a constant pressure spray system. • For pressure to 65 PSI (4.5 bar) • 5 PSI (0.34 bar) pressure drop with 8 GPM (30 l/min) flow • Fabric reinforced Viton diaphragms • Nylon encapsulated 12 VCD coil with 1.4 Quick Connect terminals • Power requirement 2.5 amp • Glass-filled polypropylene (black) valve body • Internal metal parts are stainless steel • No stroke adjustment needed • Corrosion-resistant, 430SS solenoid grade armature and armature stop Note: Repair Kit includes: Spring, 2 Diaphragms, and 2 Seat Washers. | Part | Description | | AG057803 | AA144P-1-3 Single Valve | | AG426411 | AA144P-3-3 Three Valve Assembly | | AG059201 | Repair Kit for Single Valve AA144P-1-3 | AA144A DirectoValve Designed to provide remote on/off boom control, this 12V direct-acting valve has large internal flow chambers to reduce clogging. A polypropylene body with stainless steel wetted parts provides excellent corrosion resistance. Coil can be changed without removing valve from manifold. Valves are equipped with either EPDM or Viton diaphragms and seat washers. • 3/4" inlet, 1/2" boom outlet • 10 GPM at only 5 PSI drop • Draws only 2 amp • Maximum pressure 100 PSI • Good corrosion resistance 50 | Ref | Part |Description | | 1 | AG056428 | Coil | | 2 | AG052296 | Housing, Upper | | 3 | AG056429 | Armature | | 4 | AG056430 | Spring | | 5 | AG056431 | Retainer Ring | | 6 | AG052304 | Diaphragm, Viton | | 7 | AG001970 | Seat Washer Retainer, S.S. | | 8 | AG052022 | Seat Washer, Viton | | 9 | AG001973 | Spacer, S.S. | | 10 | AG001968 | Body, Poly | | 11 | AG006364 | Stem | | 12 | AG001969 | Washer, S.S. | | 13 | AG052300 | Piston, Lower | | 14 | AG052301 | Housing, Lower | | 15 | AG001976 | Screw, S.S. | | 16 | AG052259 | Nipple, use for multiples | | | AG056427 | AA144P Repair Kit for Single Valve | | Part | Description | | AG052262 | AA144A-1 EPDM Single Valve | | AG052263 | AA144A-1 Viton Single Valve | | AG052264 | AA144A-2 EPDM Two Valve Assembly | | AG052265 | AA144A-2 Viton Two Valve Assembly | | AG052266 | AA144A-3 EPDM Three Valve Assembly | | AG052267 | AA144A-3 Viton Three Valve Assembly |
AA144A DirectoValve Repair Parts Note: *Repair kit items. Old Style 144 DirectoValve Repair Parts The 144 valve is the older style and has been replaced by the AA144A. Note: *Repair kits include diaphragms, seat washer, and boot. | Ref | Part |Description | | 1 | AG006142 | Screw | | 2 | AG052296 | Housing, Upper | | 3 | AG052291 | Cover, Coil | | 4 | AG052292 | Armature Stop | | 5 | AG052293 | Coil | | 6 | AG052299 | Diaphragm EPDM (2 req'd)* | | 6 | AG052304 | Diaphragm, Viton (2 req'd)* | | 7 | AG001970 | Seat Washer Retainer, S.S. | | 8 | AG052022 | Seat Washer, Viton | | 9 | AG001973 | Spacer, S.S. | | 10 | AG001968 | Body, Poly | | 11 | AG006364 | Stem | | 12 | AG001969 | Washer, S.S. | | 13 | AG052300 | Piston, Lower | | 14 | AG052301 | Housing, Lower | | 15 | AG001976 | Screw, S.S. | | 16 | AG052259 | Nipple, use for multiples | | 17 | AG052290 | Nut Jam | | 18 | AG052294 | Strap | | 19 | AG052295 | Washer | | 20 | AG006365 | Seat Washer, EPDM* | | 21 | AG052297 | Armature | | 22 | AG052298 | Spring* | | 23 | AG052289 | Retaining Ring | | | AG052260 | Repair Kit 144A, EPDM (see note) | | | AG052261 | Repair Kit 144A, Viton (see note) | AA144A 3-Way DirectoValve This valve is designed to provide by-pass control and maintain a constant system pressure through the use of an orifice in the secondary by-pass line. The orifice is equal in size to the volume of the nozzles on the boom section. For pressures up to 65 PSI and flows to 8 GPM (5 PSI pressure drop). • Outlet #1 - 1/2" • Outlet #2 - 3/4" Inlet Flow Thru Continuous • Outlet#3 - 1/2" | Part | Description | | AG007709 | AA144A-1-3 Single Valve | | AG008997 | Repair Kit for AA144A-1-3 | | Ref | Part |Description | | 1 | AG006142 | Screw | | 2 | AG001974 | Nut Jam | | 7 | AG001970 | Seat Washer Retainer, S.S. | | 8 | AG052022 | Seat Washer, Viton | | 9 | AG001973 | Spacer, S.S. | | 10 | AG001968 | Body, Poly | | 11 | AG006364 | Stem | | 12 | AG001969 | Washer, S.S. | | 15 | AG001976 | Screw, S.S. | | 17 | AG006366 | Spring | | 18 | AG002623 | Piston | | 20 | AG006365 | Seat Washer, EPDM* | | 21 | AG001979 | Boot* | | 22 | AG006367 | Retainer | | 23 | AG006975 | Diaphragm EPDM | | 23 | AG008639 | Diaphragm, Viton* | | 24 | AG052044 | Plate | | | AG001595 | Repair Kit 144 - EPDM | | | AG007421 | Repair Kit 144 - Viton | | | AG050980 | Repair Kit 144H - EPDM | AA145H DirectoValve The 145H solenoid - operated DirectoValve was specifically designed to provide a remote on-off control for farm spray applications. They are powered by the rigs 12 volt electrical system and are direct acting with large internal flow chambers, thereby making them suitable for wettable powder applications. 145H Features: • 1" Outlet to spray line • Operating pressure range 0-100 PSI • Weight Approx. 6 lbs. • Fiberglass reinforced nylon valve body • Internal metal parts are stainless steel • Large flow capacities - Only 5 PSI drop with 15 GPM • Coil can be changed without removing valve from line • Two 1" inlet connections to provide continuous bypass flow and/or gang multiple valves • Polyester encapsulated 12VDC 35 watt coil with recessed 1/4" quick connect terminals | Part | Description | | AG050879 | AA145H-1 EPDM | | AG051247 | AA145H-1 Viton | Valves 51
- Page 1 and 2: AGCO Application Equipment Parts &
- Page 3 and 4: Introduction and Contents Welcome t
- Page 5 and 6: Spray Tips, Drift Guard . . . . .13
- Page 7 and 8: Foam Tank Cleaner Ag-Chem foam tank
- Page 9 and 10: Gauge Adapter Brass 1/8"(M) x 1/4"(
- Page 11 and 12: Manual Booms The Mec Series is a ma
- Page 13 and 14: Vertical Bulk Storage Tanks Ace-ROT
- Page 15 and 16: Pallet Paks Pallet Pak units are de
- Page 17 and 18: Cradles and Bands for Round Horizon
- Page 19 and 20: Cone Bottom Tanks Cone Bottom Tanks
- Page 21 and 22: Safety Tank FDA approved, 9-gallon,
- Page 23 and 24: Banjo Tank Fittings Double threaded
- Page 25 and 26: Falcon ® II Controller The Falcon
- Page 27 and 28: Envizio PRO The Envizio Pro multi-f
- Page 29 and 30: CAN SmarTrax/SmarTrax 3D CAN SmarTr
- Page 31 and 32: AutoBoom CAN UltraGlide AutoBoom Ul
- Page 33 and 34: SmartBoom Ravens SmartBoom is a sim
- Page 35 and 36: Switch Pro Switch Pro provides a st
- Page 37 and 38: SCS 440 and 450 Carrier Control Aut
- Page 39 and 40: SCS-Sidekick Direct Injection Syste
- Page 41 and 42: Raven Control Cables | Part | Descr
- Page 43 and 44: Calc-An-Acre II The Calc-An-Acre II
- Page 45 and 46: RFM60S Flowmeter RFM100 Repair Part
- Page 47 and 48: RFM400 Repair Parts Accu-Flow Kits
- Page 49 and 50: CCS100 Custom Control System Liquid
- Page 51: CCS100 Flow Sensor Provides informa
- Page 55 and 56: Raven ® Electric Shut-Off Valves 1
- Page 57 and 58: QC3-Stack Valves Stack up to 10 val
- Page 59 and 60: Polypropylene Union Ball Valve A qu
- Page 61 and 62: All Stainless Steel Valves A qualit
- Page 63 and 64: Centerline Butterfly Valves Notes:
- Page 65 and 66: ACE 150 Series Repair Parts Note: V
- Page 67 and 68: ACE FMC-HYD Repair Parts Repair Par
- Page 69 and 70: SpraCoupe Replacement Pump Ace's ne
- Page 71 and 72: PTO Belt Driven Pumps Cast iron 1-1
- Page 73 and 74: Hypro Series 9303P Pumps Hydraulica
- Page 75 and 76: 9000 Series Centrifugal Pump Repair
- Page 77 and 78: Torque Bar and Chain Anchors pump d
- Page 79 and 80: Hypro D135 Diaphragm Pump Hypro low
- Page 81 and 82: 6500 Series Roller Pump • Max flo
- Page 83 and 84: Hydraulically-Driven Pressure Washe
- Page 85 and 86: 12V Motor Speed Control Controller
- Page 87 and 88: Repair Parts for Scot 2" Pump Scot
- Page 89 and 90: Ace GE-Series Pumps Ace's GE-Series
- Page 91 and 92: Type 316 Stainless Steel Pedestal P
- Page 93 and 94: Pacer Hand Pump Heavy-duty, double-
- Page 95 and 96: GREEN XLPE for Chemical Transfer Fo
- Page 97 and 98: Dry Poppet Coupling Type B Female c
- Page 99 and 100: Viton Gaskets Note: AG009979 gasket
- Page 101 and 102: 45° and 90° Street Elbows Couplin
AA144A DirectoValve Repair <strong>Parts</strong><br />
Note: *Repair kit items.<br />
Old Style 144 DirectoValve Repair <strong>Parts</strong><br />
The 144 valve is the older style and has been replaced by the AA144A.<br />
Note: *Repair kits include diaphragms, seat washer, and boot.<br />
| Ref | Part |Description |<br />
| 1 | AG006142 | Screw |<br />
| 2 | AG052296 | Housing, Upper |<br />
| 3 | AG052291 | Cover, Coil |<br />
| 4 | AG052292 | Armature Stop |<br />
| 5 | AG052293 | Coil |<br />
| 6 | AG052299 | Diaphragm EPDM (2 req'd)* |<br />
| 6 | AG052304 | Diaphragm, Viton (2 req'd)* |<br />
| 7 | AG001970 | Seat Washer Retainer, S.S. |<br />
| 8 | AG052022 | Seat Washer, Viton |<br />
| 9 | AG001973 | Spacer, S.S. |<br />
| 10 | AG001968 | Body, Poly |<br />
| 11 | AG006364 | Stem |<br />
| 12 | AG001969 | Washer, S.S. |<br />
| 13 | AG052300 | Piston, Lower |<br />
| 14 | AG052301 | Housing, Lower |<br />
| 15 | AG001976 | Screw, S.S. |<br />
| 16 | AG052259 | Nipple, use for multiples |<br />
| 17 | AG052290 | Nut Jam |<br />
| 18 | AG052294 | Strap |<br />
| 19 | AG052295 | Washer |<br />
| 20 | AG006365 | Seat Washer, EPDM* |<br />
| 21 | AG052297 | Armature |<br />
| 22 | AG052298 | Spring* |<br />
| 23 | AG052289 | Retaining Ring |<br />
| | AG052260 | Repair Kit 144A, EPDM (see note) |<br />
| | AG052261 | Repair Kit 144A, Viton (see note) |<br />
AA144A 3-Way DirectoValve<br />
This valve is designed to provide by-pass<br />
control and maintain a constant system<br />
pressure through the use of an orifice in<br />
the secondary by-pass line. The orifice is<br />
equal in size to the volume of the nozzles<br />
on the boom section. For pressures up to<br />
65 PSI and flows to 8 GPM (5 PSI pressure<br />
drop).<br />
• Outlet #1 - 1/2"<br />
• Outlet #2 - 3/4" Inlet Flow Thru<br />
Continuous<br />
• Outlet#3 - 1/2"<br />
| Part | Description |<br />
| AG007709 | AA144A-1-3 Single Valve |<br />
| AG008997 | Repair Kit for AA144A-1-3 |<br />
| Ref | Part |Description |<br />
| 1 | AG006142 | Screw |<br />
| 2 | AG001974 | Nut Jam |<br />
| 7 | AG001970 | Seat Washer Retainer, S.S. |<br />
| 8 | AG052022 | Seat Washer, Viton |<br />
| 9 | AG001973 | Spacer, S.S. |<br />
| 10 | AG001968 | Body, Poly |<br />
| 11 | AG006364 | Stem |<br />
| 12 | AG001969 | Washer, S.S. |<br />
| 15 | AG001976 | Screw, S.S. |<br />
| 17 | AG006366 | Spring |<br />
| 18 | AG002623 | Piston |<br />
| 20 | AG006365 | Seat Washer, EPDM* |<br />
| 21 | AG001979 | Boot* |<br />
| 22 | AG006367 | Retainer |<br />
| 23 | AG006975 | Diaphragm EPDM |<br />
| 23 | AG008639 | Diaphragm, Viton* |<br />
| 24 | AG052044 | Plate |<br />
| | AG001595 | Repair Kit 144 - EPDM |<br />
| | AG007421 | Repair Kit 144 - Viton |<br />
| | AG050980 | Repair Kit 144H - EPDM |<br />
AA145H DirectoValve<br />
The 145H solenoid - operated DirectoValve was<br />
specifically designed to provide a remote on-off<br />
control for farm spray applications. They are<br />
powered by the rigs 12 volt electrical system and<br />
are direct acting with large internal flow chambers,<br />
thereby making them suitable for wettable<br />
powder applications.<br />
145H Features:<br />
• 1" Outlet to spray line • Operating pressure range 0-100 PSI<br />
• Weight Approx. 6 lbs. • Fiberglass reinforced nylon valve body<br />
• Internal metal parts are stainless steel<br />
• Large flow capacities - Only 5 PSI drop with 15 GPM<br />
• Coil can be changed without removing valve from line<br />
• Two 1" inlet connections to provide continuous bypass flow and/or<br />
gang multiple valves<br />
• Polyester encapsulated 12VDC 35 watt coil with recessed 1/4" quick<br />
connect terminals<br />
| Part | Description |<br />
| AG050879 | AA145H-1 EPDM |<br />
| AG051247 | AA145H-1 Viton |<br />
Valves<br />
51