Controllers - AGCO Parts

RFM400 Repair Parts
Accu-Flow Kits For Later Model Ravens
For a 440 console with revision H or a 330 console
requires a carbon steel valve (No. AG715184) and
flowmeter (No. AG719168). Order if not present in your existing system.
| Part | Description |
| AG715172 | Accu-Flow Kit 30, GPM (7,596 lbs./hr.) |
| Ref | Part | Description |
| 1 | AG056095 | Clamp, V-Band (1) |
| 6 | AG713651 | Inlet Hub |
| 7 | AG713650 | Rotor |
| 8 | AG713649 | O-Ring, Viton |
| 13 | AG009468 | End Bearing and P.C. Assembly Kit |
| 15 | AG050394 | End Bearing Assembly |
| 16 | AG708715 | O-Ring Viton |
| 17 | AG713653 | Spacer |
| 19 | AG050456 | P.C. Assembly |
| | AG714986 | Screw 2 - 56 x 1/2 in SS |
| | AG710719 | Cable Kit |
Flowmeter Magmeter
Magmeter 200 Assembly.
• No Moving Parts
• 3-200 gallon operation range
• M220 flange connection
• Compatible with most Ag Chemicals
• No maintenance design nothing to wear out
• Wide operating range can replace RFM100 and
RFM200
• Excellent for suspension fertilizer and calcium
applications
• 4" Magmeter Assembly (35-1,500 GPM)
• 6" Magmeter Assembly (70-3,000 GPM)
| Part | Description |
| 526572D1 | Magmeter 200 Assembly |
| AG428132 | 3" Magmeter Assembly (22-1,000 GPM) |
| AG427120 | 4" Magmeter Assembly |
| AG427520 | 6" Magmeter Assembly |
Raven Accu-Flow for Anhydrous Ammonia
The Accu-
Flow system
converts all gas to a liquid so automatic
rate control can be achieved
through the use of an SCS-440 or
330 control console.
Notes: The following systems are for a 440 console with revision letter
A through G and require a carbon steel control valve (No. AG427291)
and flowmeter (No. AG719168). Order if not present in your existing
system.
| Part | Description |
| AG709431 | Accu-Flow Kit, 20 GPM (5,064 lbs./hr.) |
| AG427307 | Accu-Flow Kit, 30 GPM (7,596 lbs./hr.) |
| AG427278 | Accu-Flow Gasket Retainer Kit |
SCS 330/440 Control Kits with Console and Accu-
Flow Systems
If you need a 330 or 440 console for an Accu-Flow
System, order from below. Control kits include
flowmeter (No. AG719168) and control valve (No. AG715184).
| Part | Description |
| AG715669 | SCS 330 Control Kit for NH3 (less speed sensor) |
| AG059895 | SCS 440 Control Kit for NH3 (less speed sensor) |
| AG715172 | Accu-Flow Kit 30, GPM (7,596 lbs./hr.) |
FlowMax 110 Flow Monitor
Now you can bulk load from a
nurse truck to a sprayer tank
or from a chemical bulk tank to a transport truck
economically and dependably. The Flow Max 110
measures the liquid being pumped from one tank to
another. An in-line flowmeter provides a signal to
the 110 monitor which displays a readout in either
gallons or liters. The 110 console is an economical,
single product flow monitor that provides the same reliable service and
quality you have come to expect in other Raven flow control systems.
Raven offers a variety of flowmeters which allow the Flow Max 110 to
accurately meter a wide range of flow rates and accommodate a variety
of plumbing sizes. Display features include batch volume, rate of flow,
total volume measured, and sub volume measured. Operates on 12V,
DC or 110V, AC with any standard AC to DC converter.
| Part | Description |
| AG716980 | Flow Max 110 Flow Monitor |
FlowMax 220
The Flow Max 220
Measures the liquid
pumped from one tank to another while
providing a self contained digital display
with 6 digits indicating flow rate and totals.
Max total displayed 999,999 gallons or
liters.
Installation can be directly mounted in line on the sprayer, nurse truck,
or chemical fill tank. It operates using a single internal and replaceable
3.6V long life battery that will last for over 1.5 million gallons total. 2"
(F)NPT Ends. Flow is 5 gpm to 200 gpm.
| Part | Description |
| AG725934 | Flow Max 220 |
| AG426674 | Lithium Battery |
| AG428177 | Display Assembly |
| AG710189 | Hose Clamp |
| AG712721 | Mounting Bracket (RFM 100/200) |
Controllers
45