Controllers - AGCO Parts
Controllers - AGCO Parts Controllers - AGCO Parts
RFM200P Repair Parts RFM200 Repair Parts Controllers | Ref | Part | Description | | 1 | AG710621 | Sensor Housing Assembly | | 3 | AG710623 | Hub Housing | | 5 | AG710422 | End Bearing and P.C. Assembly | | 6 | AG009468 | End Bearing and P.C. Assembly Kit | | 8 | AG050456 | P.C. Assembly | | 9 | AG708715 | O-Ring Viton | | 10 | AG050394 | End Bearing Assembly | | 11 | AG710622 | Retainer Clamp | | 12 | AG709343 | O-Ring Viton | | 13 | AG709345 | Turbine | | 15 | AG708713 | Turbine Hub/Bearing Assembly | | 16 | AG709344 | Stud with Bearing | | | AG710719 | Cable Kit | RFM200 Flowmeter Cast iron material. 15 to 200 GPM with 3" NPT inlet and outlet. Rated at 300 PSI and poly unit is 90 PSI. | Part | Description | | AG708397 | Flowmeter RFM-200 Cast Iron 3" NPT | | Ref | Part |Description | | 1 | AG709337 | Sensor Housing Assembly | | 2 | AG711933 | Sensor Housing | | 3 | AG711934 | Hub Housing | | 4 | AG562064 | Bolt 1/4 - 20NC x 1 S.S. | | 5 | AG050456 | P.C. Assembly | | 6 | AG708715 | O-Ring Viton | | 7 | AG050394 | End Bearing Assembly | | 8 | AG710422 | End Bearing and P.C. Assembly | | 9 | AG711226 | Screw | | 10 | AG009468 | End Bearing and P.C. Assembly Kit | | 11 | AG709343 | O-Ring Viton | | 12 | AG709345 | Turbine | | 13 | AG708713 | Turbine Hub/Bearing Assembly | | 14 | AG711903 | Screw, 6-20 x 1/2", S.S. | | 15 | AG709344 | Stud with Bearing | | | AG710719 | Cable Kit | RFM400 Flowmeter NPT female inlet and outlet. 4" housing. 30 to 400 GPM. 90 PSI rating. | Part | Description | | AG713271 | Flowmeter RFM400 | 44
RFM400 Repair Parts Accu-Flow Kits For Later Model Ravens For a 440 console with revision H or a 330 console requires a carbon steel valve (No. AG715184) and flowmeter (No. AG719168). Order if not present in your existing system. | Part | Description | | AG715172 | Accu-Flow Kit 30, GPM (7,596 lbs./hr.) | | Ref | Part | Description | | 1 | AG056095 | Clamp, V-Band (1) | | 6 | AG713651 | Inlet Hub | | 7 | AG713650 | Rotor | | 8 | AG713649 | O-Ring, Viton | | 13 | AG009468 | End Bearing and P.C. Assembly Kit | | 15 | AG050394 | End Bearing Assembly | | 16 | AG708715 | O-Ring Viton | | 17 | AG713653 | Spacer | | 19 | AG050456 | P.C. Assembly | | | AG714986 | Screw 2 - 56 x 1/2 in SS | | | AG710719 | Cable Kit | Flowmeter Magmeter Magmeter 200 Assembly. • No Moving Parts • 3-200 gallon operation range • M220 flange connection • Compatible with most Ag Chemicals • No maintenance design nothing to wear out • Wide operating range can replace RFM100 and RFM200 • Excellent for suspension fertilizer and calcium applications • 4" Magmeter Assembly (35-1,500 GPM) • 6" Magmeter Assembly (70-3,000 GPM) | Part | Description | | 526572D1 | Magmeter 200 Assembly | | AG428132 | 3" Magmeter Assembly (22-1,000 GPM) | | AG427120 | 4" Magmeter Assembly | | AG427520 | 6" Magmeter Assembly | Raven Accu-Flow for Anhydrous Ammonia The Accu- Flow system converts all gas to a liquid so automatic rate control can be achieved through the use of an SCS-440 or 330 control console. Notes: The following systems are for a 440 console with revision letter A through G and require a carbon steel control valve (No. AG427291) and flowmeter (No. AG719168). Order if not present in your existing system. | Part | Description | | AG709431 | Accu-Flow Kit, 20 GPM (5,064 lbs./hr.) | | AG427307 | Accu-Flow Kit, 30 GPM (7,596 lbs./hr.) | | AG427278 | Accu-Flow Gasket Retainer Kit | SCS 330/440 Control Kits with Console and Accu- Flow Systems If you need a 330 or 440 console for an Accu-Flow System, order from below. Control kits include flowmeter (No. AG719168) and control valve (No. AG715184). | Part | Description | | AG715669 | SCS 330 Control Kit for NH3 (less speed sensor) | | AG059895 | SCS 440 Control Kit for NH3 (less speed sensor) | | AG715172 | Accu-Flow Kit 30, GPM (7,596 lbs./hr.) | FlowMax 110 Flow Monitor Now you can bulk load from a nurse truck to a sprayer tank or from a chemical bulk tank to a transport truck economically and dependably. The Flow Max 110 measures the liquid being pumped from one tank to another. An in-line flowmeter provides a signal to the 110 monitor which displays a readout in either gallons or liters. The 110 console is an economical, single product flow monitor that provides the same reliable service and quality you have come to expect in other Raven flow control systems. Raven offers a variety of flowmeters which allow the Flow Max 110 to accurately meter a wide range of flow rates and accommodate a variety of plumbing sizes. Display features include batch volume, rate of flow, total volume measured, and sub volume measured. Operates on 12V, DC or 110V, AC with any standard AC to DC converter. | Part | Description | | AG716980 | Flow Max 110 Flow Monitor | FlowMax 220 The Flow Max 220 Measures the liquid pumped from one tank to another while providing a self contained digital display with 6 digits indicating flow rate and totals. Max total displayed 999,999 gallons or liters. Installation can be directly mounted in line on the sprayer, nurse truck, or chemical fill tank. It operates using a single internal and replaceable 3.6V long life battery that will last for over 1.5 million gallons total. 2" (F)NPT Ends. Flow is 5 gpm to 200 gpm. | Part | Description | | AG725934 | Flow Max 220 | | AG426674 | Lithium Battery | | AG428177 | Display Assembly | | AG710189 | Hose Clamp | | AG712721 | Mounting Bracket (RFM 100/200) | Controllers 45
- Page 1 and 2: AGCO Application Equipment Parts &
- Page 3 and 4: Introduction and Contents Welcome t
- Page 5 and 6: Spray Tips, Drift Guard . . . . .13
- Page 7 and 8: Foam Tank Cleaner Ag-Chem foam tank
- Page 9 and 10: Gauge Adapter Brass 1/8"(M) x 1/4"(
- Page 11 and 12: Manual Booms The Mec Series is a ma
- Page 13 and 14: Vertical Bulk Storage Tanks Ace-ROT
- Page 15 and 16: Pallet Paks Pallet Pak units are de
- Page 17 and 18: Cradles and Bands for Round Horizon
- Page 19 and 20: Cone Bottom Tanks Cone Bottom Tanks
- Page 21 and 22: Safety Tank FDA approved, 9-gallon,
- Page 23 and 24: Banjo Tank Fittings Double threaded
- Page 25 and 26: Falcon ® II Controller The Falcon
- Page 27 and 28: Envizio PRO The Envizio Pro multi-f
- Page 29 and 30: CAN SmarTrax/SmarTrax 3D CAN SmarTr
- Page 31 and 32: AutoBoom CAN UltraGlide AutoBoom Ul
- Page 33 and 34: SmartBoom Ravens SmartBoom is a sim
- Page 35 and 36: Switch Pro Switch Pro provides a st
- Page 37 and 38: SCS 440 and 450 Carrier Control Aut
- Page 39 and 40: SCS-Sidekick Direct Injection Syste
- Page 41 and 42: Raven Control Cables | Part | Descr
- Page 43 and 44: Calc-An-Acre II The Calc-An-Acre II
- Page 45: RFM60S Flowmeter RFM100 Repair Part
- Page 49 and 50: CCS100 Custom Control System Liquid
- Page 51 and 52: CCS100 Flow Sensor Provides informa
- Page 53 and 54: AA144A DirectoValve Repair Parts No
- Page 55 and 56: Raven ® Electric Shut-Off Valves 1
- Page 57 and 58: QC3-Stack Valves Stack up to 10 val
- Page 59 and 60: Polypropylene Union Ball Valve A qu
- Page 61 and 62: All Stainless Steel Valves A qualit
- Page 63 and 64: Centerline Butterfly Valves Notes:
- Page 65 and 66: ACE 150 Series Repair Parts Note: V
- Page 67 and 68: ACE FMC-HYD Repair Parts Repair Par
- Page 69 and 70: SpraCoupe Replacement Pump Ace's ne
- Page 71 and 72: PTO Belt Driven Pumps Cast iron 1-1
- Page 73 and 74: Hypro Series 9303P Pumps Hydraulica
- Page 75 and 76: 9000 Series Centrifugal Pump Repair
- Page 77 and 78: Torque Bar and Chain Anchors pump d
- Page 79 and 80: Hypro D135 Diaphragm Pump Hypro low
- Page 81 and 82: 6500 Series Roller Pump • Max flo
- Page 83 and 84: Hydraulically-Driven Pressure Washe
- Page 85 and 86: 12V Motor Speed Control Controller
- Page 87 and 88: Repair Parts for Scot 2" Pump Scot
- Page 89 and 90: Ace GE-Series Pumps Ace's GE-Series
- Page 91 and 92: Type 316 Stainless Steel Pedestal P
- Page 93 and 94: Pacer Hand Pump Heavy-duty, double-
- Page 95 and 96: GREEN XLPE for Chemical Transfer Fo
RFM200P Repair <strong>Parts</strong><br />
RFM200 Repair <strong>Parts</strong><br />
<strong>Controllers</strong><br />
| Ref | Part | Description |<br />
| 1 | AG710621 | Sensor Housing Assembly |<br />
| 3 | AG710623 | Hub Housing |<br />
| 5 | AG710422 | End Bearing and P.C. Assembly |<br />
| 6 | AG009468 | End Bearing and P.C. Assembly Kit |<br />
| 8 | AG050456 | P.C. Assembly |<br />
| 9 | AG708715 | O-Ring Viton |<br />
| 10 | AG050394 | End Bearing Assembly |<br />
| 11 | AG710622 | Retainer Clamp |<br />
| 12 | AG709343 | O-Ring Viton |<br />
| 13 | AG709345 | Turbine |<br />
| 15 | AG708713 | Turbine Hub/Bearing Assembly |<br />
| 16 | AG709344 | Stud with Bearing |<br />
| | AG710719 | Cable Kit |<br />
RFM200 Flowmeter<br />
Cast iron material. 15 to 200 GPM with<br />
3" NPT inlet and outlet. Rated at 300<br />
PSI and poly unit is 90 PSI.<br />
| Part | Description |<br />
| AG708397 | Flowmeter RFM-200 Cast Iron 3" NPT |<br />
| Ref | Part |Description |<br />
| 1 | AG709337 | Sensor Housing Assembly |<br />
| 2 | AG711933 | Sensor Housing |<br />
| 3 | AG711934 | Hub Housing |<br />
| 4 | AG562064 | Bolt 1/4 - 20NC x 1 S.S. |<br />
| 5 | AG050456 | P.C. Assembly |<br />
| 6 | AG708715 | O-Ring Viton |<br />
| 7 | AG050394 | End Bearing Assembly |<br />
| 8 | AG710422 | End Bearing and P.C. Assembly |<br />
| 9 | AG711226 | Screw |<br />
| 10 | AG009468 | End Bearing and P.C. Assembly Kit |<br />
| 11 | AG709343 | O-Ring Viton |<br />
| 12 | AG709345 | Turbine |<br />
| 13 | AG708713 | Turbine Hub/Bearing Assembly |<br />
| 14 | AG711903 | Screw, 6-20 x 1/2", S.S. |<br />
| 15 | AG709344 | Stud with Bearing |<br />
| | AG710719 | Cable Kit |<br />
RFM400 Flowmeter<br />
NPT female inlet and outlet. 4" housing. 30<br />
to 400 GPM. 90 PSI rating.<br />
| Part | Description |<br />
| AG713271 | Flowmeter RFM400 |<br />
44