Controllers - AGCO Parts
Controllers - AGCO Parts Controllers - AGCO Parts
Radar Speed Sensor Interface Cables Notes: For Console with revision "E" or later. * is 1990 model year or later with factory-installed performance monitor. | Part | Description | | AG056073 | Raven Radar Ford Gen./Vers./New Holland | | AG714280 | Raven Radar for John Deere | | AG056072 | Raven Radar for Case-IH | | AG714879 | Dickey-john Radar for Ford Gen./Vers./New Holland | | AG711020 | Dickey-john Radar for John Deere* | | AG711021 | Dickey-john or Magnavox Gun - John Deere - Rev D Console or Earlier ** | | AG715258 | Dickey-john Radar for John Deere 7000/8000/9000 Series | | AG710963 | Dickey-john Radar for Case-IH | | AG711018 | Dickey-john Gun- Cat 65 & 75 - Rev E Console or Later ** | | AG715886 | Dickey-john Gun- Cat 65 & 75 - Rev D Console or Earlier ** | | AG713731 | Dickey-john Radar for Cat Challenger 65C/75C | | AG712093 | Dickey-john Gun - Ford/White/Agco Allison -Rev E Console or Later ** | | AG609180 | Interface Cable for Dickey-john Radar | | AG710480 | Interface Cable for Dickey-john Radar (Console with Rev. "D" or earlier) | | AG711016 | TRW Radar for Case-IH | | AG056071 | Interface Cable/TRW Gun - Other - Rev E Consoles or Later | RPR 100S Smart Antenna with Speed (1 Hz) Controllers Features: • Integrated GPS WAAS receiver and antenna • Small and lightweight with rugged waterproof enclosure • 2 meter differential GPS accuracy • 10 channel GPS, LI, C/A code • Superior weak signal tracking • Position solutions at 1 per second • Free Software upgrades via internet • Radar speed log output | Part | Description | | 514832D1 | Sensor RPR 100S | Pressure Transducer for SCS 440 or SCS 450 Designed as an optional feature for the SCS 440 or SCS 450 consoles, Rev. B consoles or later with serial interface, approximately 2000 model year or later. The addition of a pressure transducer will allow the operator to monitor spraying pressure. | Part | Description | | AG059596 | Pressure Transducer | | AG059593 | Pressure Transducer Console Cable 36" | | AG059594 | Pressure Transducer Console Cable 120" | | AG726306 | Pressure Transducer Cable Console End 30 Foot | | AG726437 | Pressure Transducer Cable Sensor End 6 Foot | | AG059595 | Pressure Transducer Sensor Cable 144" | | AG726438 | Pressure Transducer Cable Sensor End 37 foot | | AG726439 | Pressure Transducer Cable 44 foot Sensor End | 40
Calc-An-Acre II The Calc-An-Acre II adds even more value to the original low-cost acre counter. In addition to providing accurate speed, area and distance measurement; the Calc-An-Acre II will now independently monitor the rpm of a shaft. It includes three independent area counters, two independent hour counters, an area per hour function and a width reduction feature to measure the effective coverage area in spraying applications. The Calc-An-Acre II offers new features while remaining compatible with existing Calc-An-Acre harness installations. The Calc-An-Acre II can be installed on most types of equipment including tractors, sprayers, combines, ATV's and trucks. It can be used in a wide range of work situations to help eliminate waste, increase productivity, and track progress. Chemical/Fertilizer Application- • Monitor and maintain ground speed with greater ease for more consistent application. Compare chemical or fertilizer usage to get an accurate measurement of the coverage area to verify correct applications rates Test Plots- • Accurately set up test plots to compare the performance of different seed varieties, tillage practices, herbicides, etc Harvesting- • Measure total area, individual fields or parts of a field for accurate yield calculations and spot checks Record Keeping- • Know the correct area is covered when leasing equipment or performing custom work General Management- • Perform timely equipment maintenance, plan work schedules and estimate completion time • The versatility of Calc-AN-Acre makes it a tool for all seasons that quickly pays for itself Note: Run Hold Kit includes sensor cable, 10' extension cable, bracket, hardware, and 2 magnets. | Part | Description | | AG726223 | Calc-An-Acre II Kit | | AG427512 | Console Only - Calc-An-Acre II | | AG726224 | Run Hold Kit | | AG726232 | Cable Extension 3 Pin 6 foot | | AG726233 | Cable Extension 3 Pin 15 foot | | AG726234 | Cable Extension 3 Pin 25 foot | | AG726227 | Drive Shaft Magnet Kit | | AG726225 | Operators Manual | | AG726226 | Magnets w/Tape (6 magnets) | | AG726228 | Magnet Clip | | AG726229 | Speed Sensor w/o Cable | | AG726230 | Cable for Speed Sensor 5 foot | | AG726231 | Speed Sensor w/Cable | Raven ® Regulating Valves Raven Shut-Off Valves Controllers | Part | Description | | AG714406 | Regulating Valve 1/4" SS | | AG714753 | Regulating Valve 3/4" Poly | | AG009013 | Regulating Valve 3/4" Nylon | | AG427293 | Regulating Valve 1" Fast Close | | AG007287 | Regulating Valve 1" Poly | | AG427291 | Regulating Valve 1" Carbon Steel | | AG059455 | Regulating Valve 1-1/2" Poly - Flanged | | AG726248 | Regulating Valve 2" SS | | AG726418 | Regulating Valve 3" SS | | Part | Description | | AG726243 | Valve 1/4" On/Off SS | | AG726419 | Valve 3/4" On/Off SS | | AG427292 | Valve 1" On/Off | | AG726416 | Valve 1-1/2" On/Off | | AG726417 | Valve 2" On/Off | | AG726220 | Valve 2" On/Off SS | | AG726423 | Valve 3" On/Off SS | 41
- Page 1 and 2: AGCO Application Equipment Parts &
- Page 3 and 4: Introduction and Contents Welcome t
- Page 5 and 6: Spray Tips, Drift Guard . . . . .13
- Page 7 and 8: Foam Tank Cleaner Ag-Chem foam tank
- Page 9 and 10: Gauge Adapter Brass 1/8"(M) x 1/4"(
- Page 11 and 12: Manual Booms The Mec Series is a ma
- Page 13 and 14: Vertical Bulk Storage Tanks Ace-ROT
- Page 15 and 16: Pallet Paks Pallet Pak units are de
- Page 17 and 18: Cradles and Bands for Round Horizon
- Page 19 and 20: Cone Bottom Tanks Cone Bottom Tanks
- Page 21 and 22: Safety Tank FDA approved, 9-gallon,
- Page 23 and 24: Banjo Tank Fittings Double threaded
- Page 25 and 26: Falcon ® II Controller The Falcon
- Page 27 and 28: Envizio PRO The Envizio Pro multi-f
- Page 29 and 30: CAN SmarTrax/SmarTrax 3D CAN SmarTr
- Page 31 and 32: AutoBoom CAN UltraGlide AutoBoom Ul
- Page 33 and 34: SmartBoom Ravens SmartBoom is a sim
- Page 35 and 36: Switch Pro Switch Pro provides a st
- Page 37 and 38: SCS 440 and 450 Carrier Control Aut
- Page 39 and 40: SCS-Sidekick Direct Injection Syste
- Page 41: Raven Control Cables | Part | Descr
- Page 45 and 46: RFM60S Flowmeter RFM100 Repair Part
- Page 47 and 48: RFM400 Repair Parts Accu-Flow Kits
- Page 49 and 50: CCS100 Custom Control System Liquid
- Page 51 and 52: CCS100 Flow Sensor Provides informa
- Page 53 and 54: AA144A DirectoValve Repair Parts No
- Page 55 and 56: Raven ® Electric Shut-Off Valves 1
- Page 57 and 58: QC3-Stack Valves Stack up to 10 val
- Page 59 and 60: Polypropylene Union Ball Valve A qu
- Page 61 and 62: All Stainless Steel Valves A qualit
- Page 63 and 64: Centerline Butterfly Valves Notes:
- Page 65 and 66: ACE 150 Series Repair Parts Note: V
- Page 67 and 68: ACE FMC-HYD Repair Parts Repair Par
- Page 69 and 70: SpraCoupe Replacement Pump Ace's ne
- Page 71 and 72: PTO Belt Driven Pumps Cast iron 1-1
- Page 73 and 74: Hypro Series 9303P Pumps Hydraulica
- Page 75 and 76: 9000 Series Centrifugal Pump Repair
- Page 77 and 78: Torque Bar and Chain Anchors pump d
- Page 79 and 80: Hypro D135 Diaphragm Pump Hypro low
- Page 81 and 82: 6500 Series Roller Pump • Max flo
- Page 83 and 84: Hydraulically-Driven Pressure Washe
- Page 85 and 86: 12V Motor Speed Control Controller
- Page 87 and 88: Repair Parts for Scot 2" Pump Scot
- Page 89 and 90: Ace GE-Series Pumps Ace's GE-Series
- Page 91 and 92: Type 316 Stainless Steel Pedestal P
Radar Speed Sensor Interface Cables<br />
Notes: For Console with revision "E" or later. * is 1990 model year or later with factory-installed performance monitor.<br />
| Part | Description |<br />
| AG056073 | Raven Radar Ford Gen./Vers./New Holland |<br />
| AG714280 | Raven Radar for John Deere |<br />
| AG056072 | Raven Radar for Case-IH |<br />
| AG714879 | Dickey-john Radar for Ford Gen./Vers./New Holland |<br />
| AG711020 | Dickey-john Radar for John Deere* |<br />
| AG711021 | Dickey-john or Magnavox Gun - John Deere - Rev D Console or Earlier ** |<br />
| AG715258 | Dickey-john Radar for John Deere 7000/8000/9000 Series |<br />
| AG710963 | Dickey-john Radar for Case-IH |<br />
| AG711018 | Dickey-john Gun- Cat 65 & 75 - Rev E Console or Later ** |<br />
| AG715886 | Dickey-john Gun- Cat 65 & 75 - Rev D Console or Earlier ** |<br />
| AG713731 | Dickey-john Radar for Cat Challenger 65C/75C |<br />
| AG712093 | Dickey-john Gun - Ford/White/Agco Allison -Rev E Console or Later ** |<br />
| AG609180 | Interface Cable for Dickey-john Radar |<br />
| AG710480 | Interface Cable for Dickey-john Radar (Console with Rev. "D" or earlier) |<br />
| AG711016 | TRW Radar for Case-IH |<br />
| AG056071 | Interface Cable/TRW Gun - Other - Rev E Consoles or Later |<br />
RPR 100S Smart Antenna with Speed (1 Hz)<br />
<strong>Controllers</strong><br />
Features:<br />
• Integrated GPS WAAS receiver and antenna<br />
• Small and lightweight with rugged waterproof enclosure<br />
• 2 meter differential GPS accuracy<br />
• 10 channel GPS, LI, C/A code<br />
• Superior weak signal tracking<br />
• Position solutions at 1 per second<br />
• Free Software upgrades via internet<br />
• Radar speed log output<br />
| Part | Description |<br />
| 514832D1 | Sensor RPR 100S |<br />
Pressure Transducer for SCS 440 or SCS 450<br />
Designed as an optional feature for the SCS 440 or SCS 450 consoles, Rev. B consoles or later with serial interface, approximately 2000 model<br />
year or later. The addition of a pressure transducer will allow the operator to monitor spraying pressure.<br />
| Part | Description |<br />
| AG059596 | Pressure Transducer |<br />
| AG059593 | Pressure Transducer Console Cable 36" |<br />
| AG059594 | Pressure Transducer Console Cable 120" |<br />
| AG726306 | Pressure Transducer Cable Console End 30 Foot |<br />
| AG726437 | Pressure Transducer Cable Sensor End 6 Foot |<br />
| AG059595 | Pressure Transducer Sensor Cable 144" |<br />
| AG726438 | Pressure Transducer Cable Sensor End 37 foot |<br />
| AG726439 | Pressure Transducer Cable 44 foot Sensor End |<br />
40
Change language