Controllers - AGCO Parts

Tank/Injection Modules
These units are fully assembled and included a 16-gallon or 24-gallon poly tank, stand, and the injection module as
described below. All other components such as console, cables, mixer, control valve, flowmeter, and speed sensor must
be ordered separately. The following is the formula to determine the correct injection module.
Formula:
• Speed (MPH) x Boom Width (") x Rate (oz/acre) / 5940 = oz. per minute
• Example: Speed is 5.2 MPH, Boom Width is 480", and rate desired is 48 oz/acre
• 5.2MPH x 480" x 48 oz. / 5940 = 20.2 oz. per minute
Notes: One injection module is required for each chemical being injected. The module includes a positive displacement
metering pump driven by a 12-volt motor. Also included in this completely assembled package is a motor control, flow
switch, vacuum switch, three-way valve, and a stainless steel housing. Plug-in controllers work well with Envizio PRO,
Viper PRO, 5000 and 4400.
Controllers
| Part | Description |
| 511963D1 | Pump Motor Asm (5-200 oz./min) |
| AG426852 | Pump Motor Asm (1-40 oz./min) |
| AG426584 | Module 24-Gallon (5-200 oz./min) |
| AG426604 | Module 24-Gallon (1-40 oz./min) |
| 511965D1 | Can Motor Control |
| AG426606 | Can Motor Control with Agitator Control |
| AG331521 | Can Motor Control Power Cable 35' |
| AG133030 | Motor Control (non-CAN systems) |
| 511966D1 | Kit Mounting Motor Control |
| AG609185 | Controller Elec. Motor |
| AG727069 | Motor Control Retrofit Kit |
| AG426865 | Can Motor Control w/Agitator Control Kit |
| AG726884 | Manifold Flow Switch Retrofit Asm |
| AG713955 | Tank 24-Gallon (for agitation) |
| AG426869 | 24-Gallon Tank Saddle Only |
| AG713956 | Agitator Kit for 8-Gallon Tank |
| AG426870 | 15-Gallon Agitator |
| AG426871 | 30-Gallon Agitator |
| AG426872 | 3" Blade Mix All Electric Agitator |
| AG426873 | 4" Blade Mix All Electric Agitator |
| AG426874 | 30' Extension Cable for Agitators |
36