Controllers - AGCO Parts

RoGator/TerraGator
2003-2005 8/10/1264 RoGator Sheet Metal
Applications: 2003-2005 864/1064/1264 Sheet metal.
Notes: The ladder cylinder has been updated from AG424994 to
AG425222. If you are replacing AG424994 with AG425222 you will
also need to order 2 of AG561677, 90 D Elbow to adapt the new cylinder.
Part number of the cylinder should be stamped near the base
end of the cylinder.
| Part | Description |
| AG130133 | Ladder Stringer LH Upper |
| AG130058 | Ladder Stringer RH Upper |
| AG130132 | Ladder Stringer LH Lower |
| AG130135 | Ladder Stringer RH Lower |
| AG327251 | Step Aluminum |
| AG519802 | Rubber Bumper for Entry Door |
| AG520929 | Grab Handle |
| AG425222 | Cylinder for Hydraulic Fold Ladder |
| AG561677 | Elbow 90 D MO-R x MJIC (ladder Cylinder) |
| AG262883 | Spacer Base End of Cylinder Upper Ladder |
| AG522454 | Knob 4 Prong .31 x 1 |
| AG522406 | Gas Spring for Hood |
| AG600008 | Rubber Strap for Hood |
| AG601225 | Pin for Rubber Strap |
2003-2005 8/10/1274 Sheet Metal
Applications: 2003-2005 8/10/1274 RoGator Sheet Metal.
Notes: The ladder cylinder has been updated from AG424494 to
AG425222. If you are replacing AG424994 with AG425222 you will
also need to order 2 of AG561677, 90D Elbow to adapt new cylinder.
Part number of the cylinder should be stamped near the base end of
the cylinder. The ball stud and hardware listed are parts to improve the
shock and hood assy. to be stronger. Please refer to service bulletin
0520 for more information.
| Part | Description |
| AG132277 | Ladder Stringer LH upper |
| AG132278 | Ladder Stringer RH upper |
| AG132280 | Ladder Stringer LH Lower |
| AG132281 | Ladder Stringer RH lower |
| AG130450 | Step entrance stamped steel |
| AG520929 | Grab Handle |
| AG519802 | Rubber Bumper for Entry Door |
| AG425222 | Cylinder for Hydraulic Fold Ladder |
| AG610878 | Seal Kit for Cylinder 425222 |
| AG561677 | Elbow 90 D MO-R x MJIC (ladder Cylinder) |
| AG262883 | Spacer Base End of Cylinder Upper Ladder |
| AG522454 | Knob 4 Prong .31 x 1 |
| AG522406 | Gas Spring for Hood |
| AG518511 | Nut Flange 3/8 - 24 NF |
| AG600008 | Rubber Strap for Hood |
| AG601225 | Pin for Rubber Strap |
1997-2001 854 RoGator Air System
Application:1997-2001 854 RoGator
air system.
Notes: 1997-1998 854 RoGators
use a Turbo 3000 air dryer. 1999-
2001 854 RoGators use a Meritor
Wabco type air dryer.(See 01-02 854
for Wabco parts break down) +
519852 1997-1998 ++ 522147 1999-
2001 854.
| Part | Description |
| AG334459 | Gasket Between Engine and Compressor |
| AG511005 | Air Governor |
| AG224865 | Hose Assy -8 x 102 inches Teflon Hose Stainless Steel Braid |
| AG519852 | Air Dryer (Turbo 3000) + |
| AG716163 | Heater Kit |
| AG716164 | Turbo Valve |
| AG716165 | Check Valve |
| AG716166 | Unloader Valve |
| AG716167 | Dessicant Replacement Filter 1996-1998 |
| AG718175 | Safety Valve |
| AG522147 | Air Dryer ++ |
| AG330202 | Filter, Air Dryer Desiccant (with air dryer option) |
| AG723385 | Heater Kit 12 V |
| AG723382 | Regeneration Valve |
| AG058537 | Turbo Cut-Off Valve |
| AG724201 | Purge Valve |
| AG723386 | Outlet Check Valve Kit |
| AG725783 | Econ Valve Kit |
318