Controllers - AGCO Parts

AutoBoom CAN UltraGlide
AutoBoom UltraGlide uses state of the art ultrasonic sensors that gauge the
distance to the ground. UltraGlide Systems are typically used in pre-emergent
and post applications.
A CAN UltraGlide Controller Kit consists of the console and cabling that controls
the system from your cab. The Controller kit remains the same regardless
of the machine you are using.
An Installation Kit consists of the components on the exterior of your
machine. The installation kit is manufacturer and model-specific, so different
machines will use different kits.
A complete CAN UltraGlide system will require the ordering of four kits:
1. CAN UltraGlide Controller Kit.
2. Manufacturer and Model Specific Hydraulic Install Kit.
3. Envizio Plus, Envizio PRO, Viper PRO, Viper, SCS4000, SCS4400,
SCS4600, or SCS5000 system (will not need to order if any of these systems
are already on the machine).
4. ISOBUS Kit (AG427648 Not needed if used with existing CANBus system).
Note: Visit www.SprayParts.com for all-makes install kits.
| Ref | Part |Description |
| 1 | AG426991 | Controller Kit - CAN UltraGlide for |
| | |100 ft + booms |
| 1 | AG427962 | Controller Kit - CAN UltraGlide for |
| | |90 ft and smaller booms |
| 1 | AG427963 | Controller Kit - CAN UltraGlide for |
| | |3-pt mounted booms |
| 1 | AG427959 | Controller Kit - ISOBUS UltraGlide for |
| | |AGCO Self-Propelled w/ Falcon VT |
| 2 | AG427180 | Install Kit - RoGator 54 Series 1997 |
| | |and Newer |
| 2 | AG427183 | Install Kit - RoGator 54 Series |
| | |Pre 1997/664 |
| 2 | AG427184 | Install Kit - RoGator 64/74/86/SS Series |
| 2 | AG427492 | Install Kit - RoGator 2009 & Newer |
| 2 | AG427185 | Install Kit - TerraGator Liquid Systems |
| 2 | AG426990 | Install Kit - SpraCoupe 7x50 |
| 2 | AG427491 | Install Kit - SpraCoupe 7x60 |
| 2 | AG427182 | Install Kit - Willmar 6000-7000 Series |
| 2 | AG427181 | Install Kit - Willmar 8100/8500 |
| 3 | AG427093 | Kit - CAN AutoBoom Console |
| 4 | AG727393 | Kit - ISOBUS (Power Adapter |
| | |Tee and Terminators) |
| | AG427664 | Center Rack Control Kit - RoGator |
| | |(Factory Install) |
| | AG428013 | Center Rack Control Kit - Generic |
| | |(Prior Rev B) |
| | AG428014 | Center Rack Control Kit - Generic |
| | |(After Rev B) |
| | AG427170 | CAN Dual Ultrasonic Sensor Kit - RoGator |
| | AG428015 | CAN Dual Ultrasonic Sensor Kit - RoGator |
| | |w/ factory installed AutoBoom |
| | AG426442 | Standard Gauge Wheels - |
| | |RoGator (90-120 ft) |
| | AG428024 | Standard Gauge Wheels - RoGator (60-80 ft) |
Precision Products
29