Controllers - AGCO Parts

SOILECTION 2 BIN/4 BIN
Chain Metering System
The chain type system replaces the
original cup style system on the dry
Soilection machines. The chain
metering kit (AG724202) can be
used to convert from the cup style
system. You will need one kit per
bin.
| Part | Description |
| AG724202 | Chain Metering Kit |
| AG523384 | Replacement Chain |
| AG880475 | Splice Pin 14" long |
| AG233139 | Flange Bearing |
| AG261328 | Chain Sprocket |
PWM Block
The PWM Block (Pulse width modulation)
controls the speed and direction of the
bins on a dry Soilection machine. It is
located on the left side behind the cab.
| Part | Description |
| AG519853 | Block Assembly |
| AG609461 | Proportional Flow Control NC Valve Cartridge |
| AG609638 | Proportional Coil Only |
| AG609462 | Pressure Compensator |
| AG609463 | Position Valve |
| AG609464 | 2500 PSI Relief Valve |
| AG609465 | ND Valve |
| AG610014 | Coil Only - Two wire |
RoGator/TerraGator
Cup Metering System
This is the original cup style metering system. An update kit is available
to change to conveyer chain style. (Part AG724202)
| Part | Description |
| AG519887 | Hydraulic Motor |
| AG723116 | Seal Kit |
| AG232672 | Sprocket 20 Tooth |
| AG515101 | Idler Sprocket |
| AG519133 | Roller Chain |
| AG233139 | Flange Bearing |
| AG229053 | Shaft Driver |
| AG229054 | Shaft Follower |
| AG309505 | Metering Wheel - Red |
| AG516339 | Yellow HI-Rate Granular Wheels |
| AG309515 | Drive Plate |
| AG230279 | DJ Rate Sensor - 4 ft Cable |
Miscellaneous Parts for Soilection
Note the differences between the two medium pressure line hyd. oil filter
elements, p/n's AG711217 and 512558D1. Starting approximately in
early 2008, the 512558D1 filter element was used. The hyd. oil filter
assembly for this is p/n 524773D1. The previous hyd. oil filter assembly
was AG516738 with the AG711217 element. To help determine the
difference between the 2 hyd. oil filter assemblies, the AG516738 has
horizontal mounting bolts and the 524773D1 has vertical mounting
bolts.
Note: For Falcon Control parts see Falcon Section.
| Part | Description |
| AG517826 | Hydraulic Motor, Conveyor |
| 512558D1 | Medium Pressure Hydraulic Filter Element - 2008 and up |
| AG711217 | Medium Pressure Filter Element - Prior to 2008 |
| AG710202 | Hyd. Oil Filter Return (1) |
| 509223D1 | Motor Driver for Chemical Injection |
| AG516248 | Hydraulic Cooler |
| AG709656 | High Pressure Filter Cartridge |
| AG880475 | Splice Pin 14 inches long |
| AG521842 | Pressure Gauge 0-3000 PSI |
| AG521843 | Pressure Gauge 0-5000 PSI |
SLUDGE PARTS
6" Aluminum Couplers
| Ref | Part | Description |
| A | AG561222 | 6" Aluminum |
| B | AG561223 | 6" Aluminum |
| C | AG561148 | 6" Aluminum |
| D | AG561314 | 6" Aluminum |
| E | AG561149 | 6" Aluminum |
| F | AG561225 | 6" Aluminum |
| | AG561778 | 6" Aluminum Cap |
| | AG005084 | 6" EPDM Gasket |
| | AG561272 | 6" Super Clamp, (6.53-6.90) |
6" Hose Assemblies
| Part | Description |
| AG211743 | 6"x10' with Ends C and E |
| AG211867 | 6"x10' with 2 each C Ends |
Sludge Hose
Note: Price shown is per foot.
| Part | Description |
| AG051714 | 3" Black EPDM |
| AG706852 | 4" PVC |
| AG706851 | 6" PVC |
294