Controllers - AGCO Parts
Controllers - AGCO Parts Controllers - AGCO Parts
SPINNER SPREADER New Leader Hydraulic Filters • AG701734 - 1 Per L20FH Spreader • AG704136 - 1 Per L2020, L3020, L2020GT, L3020GT Spreader • AG704136 - 1 Per L2020 G4, L3020G4 Prior to Model Year 2004 • AG715586 - 1 Per L2020G4, L3020G4 Starting with model year 2004 and up • AG704136 - 2 Per L3020XP Spreader • AG704136 - 2 Per L322G4 Spreader • AG333623 - 1 Per L4000G4 Spreader Spinner Motor L30-20, L32-20, L4000 AG704059 retainer ring does not use a seal excluder, AG705573, AG705950 retainer ring does use the excluder seal AG706573. | Part | Description | | 522466D1 | Hydraulic Oil Filter (1) | | AG704136 | Hydraulic Oil Filter (1) | | AG715586 | Filter, Hydraulic Return (2 used), Case Drain (1 used) | RoGator/TerraGator Spinner Motor L20-20 AG704059 retainer ring does not use a seal excluder, AG706573, AG706590 retainer ring does use the excluder seal AG706573. | Ref | Part | Description | | 1 | AG704059 | Retainer Ring 1.625" ID | | 1a | AG706950 | Retainer Ring 1.8125" ID | | 3 | AG706573 | Shield Dust, Seal Excluder | | N/A | AG332694 | Spinner Motor | | 2 | AG704032 | Shaft Spinner Motor | | 4 | AG715839 | Seal | | 5 | AG703848 | O-Ring | | 6 | AG721915 | Bearing | | 7 | AG712603 | Cup | | 8 | AG708918 | Spacer | | 9 | AG841339 | Bushing | | 10 | AG707326 | Seal | | 11 | AG703824 | Gasket | | N/S | AG707507 | Key, Shaft to Fan Hub (1) | | N/S | AG711240 | Motor Repair Kit | | N/S | AG715838 | Motor Seal Kit | | N/S | AG706861 | Seal Driver Tool | | N/S | AG703965 | Installation Tool | | N/S | AG703968 | Wrench | | N/S | AG707105 | Speedy Sleeve, Shaft | | Ref | Part | Description | | N/A | AG332696 | Spinner Motor | | 1a | AG706950 | Retainer Ring 1.8125" ID | | 1 | AG704059 | Retainer Ring 1.625" ID | | 3 | AG706573 | Shield Dust, Seal Excluder | | 2 | AG704032 | Shaft Spinner Motor | | 4 | AG715839 | Seal | | 5 | AG703848 | O-Ring | | 6 | AG721915 | Bearing | | 7 | AG712603 | Cup | | | AG708918 | Spacer | | 8 | AG841339 | Bushing | | 9 | AG707326 | Seal | | 10 | AG703824 | Gasket | | | AG707507 | Key, Shaft to Fan Hub (1) | | 11 | AG703965 | Installation Tool | | N/S | AG715838 | Seal Kit | | N/S | AG059807 | Retainer Assembly | | N/S | AG707105 | Speedy Sleeve, Shaft | Servo Valves The Raven hydraulic servos are used starting with the 2006 models. The L3220G4 MultiApplier spreader uses two servo's the AG331352 servo is used on the MultiApplier portion and the AG727549 is used on the main spreader hydraulics. | Part | Description | | AG521355 | Hydraulic Servo 13 GPM | | AG609806 | Hydraulic Servo 13 GPM | | AG608842 | Hydraulic Servo 18 GPM | | AG609250 | Hydraulic Control Valve 30 GPM with 20 ft Cord | | AG519498 | Hydraulic Control Valve 58 GPM with 20 ft Cord | | AG332769 | Servo Valve 13.8 GPM Mid Tech | | AG727549 | Hyd Servo 40 GPM L3020G4 Raven | | AG331351 | Hyd Servo 25 GPM L2020G4 Raven | | AG331352 | Hyd Servo 9 GPM L3220G4 Raven | 286
Belt Over Chain Sealer (L20-20) New Leader L20-20 boxes with a belt over chain uses a steel shield with a rubber sealer riveted to it. The rubber sealer is available in different lengths. You must order rivets separately to install sealer. Instead of using rivets to install the rubber sealer strip to the metal chain shield, an alternative T-bolt and cap nut system is now available to use instead. Note that the T-bolts are available in either zinc plated or stainless steel. Quantities of each to use are as follows: For a 12' box, use 104 of each. For a 12' 6" box, use 108 of each. For a 13' box, use 112 of each. For a 14' box, use 116 of each. For a 15' box, use 124 of each. It is advisable to order a few extra of each part in case they are needed. Notes: To help you to determine the size of the spreader box that you are working with, the chain shields or sealer strips will measure 12" longer than the actual spreader box size. I.E., a chain shield or sealer strip that measures 13' 6" long means that the spreader box is a 12' 6" unit. | Part | Description | | AG704005 | Rivet | | AG843964 | Complete Asm for 12' 6" Box One Side | | AG705563 | Screw, 1/4" X 1/2" Zinc | | AG727380 | Screw, 1/4" X 1/2" SS | | AG133160 | Nut, 1/4" | Belt Shield Number 5 New Leader L20-20 Boxes with #5 belt uses a steel belt shield. There is no rubber sealer strip used. Box length determines which shield to use. Note: Contact us with box serial number if in doubt. | Part | Description | | AG708669 | L20-20 11 ft Box (Big A) | | AG708230 | L20-20 12 ft Box | | AG709218 | L20-20 12 ft 6 in Box (Ag-Chem) | New Leader #2, #3 Chain Shields & #5 Belt Shields These chain shields are relative to the New Leader spreaders with the #2 or #3 conveyor chains and the #5 conveyor belts. The part numbers are the metal chain shields and these chain shields do not use the rubber sealer strip. Note that there are part numbers for the RH and LH sides, different lengths and also various metal configurations such carbon steel (CS), 409 stainless steel (409SS) and 304 stainless steel (304SS). Pick the proper part according to the size of your spreader and what the spreader has on it. The attaching hardware used to fasten the chain shields to the spreader box is as follows: AG719051 Carriage Bolt-SS, AG562065 Hex Nut- SS and AG562050 Lockwasher-SS. Use these quantities of each p/n per spreader box; 28 per 12.5' spreader, 30 per 13' spreader and 32 per 14' spreader. Notes: The chain shields will measure one foot longer than the spreader box size. If in doubt as to what length is needed, measure the length of the chain shield for size verification. For example, on a 12' 6" spreader, the chain shields will measure 13' 6" long, on a 13' spreader, the chain shields will measure 14' long, etc. | Part | Description | | AG133014 | Chain Shield, RH-409SS, 12' 6 | | AG133013 | Chain Shield, LH-409SS, 12' 6 | | AG727538 | Chain Shield, RH-304SS, 12' 6 | | AG332131 | Chain Shield, LH-304SS, 12' 6 | | AG133151 | Chain Shield, RH-CS, 13' Spreader | | AG133155 | Chain Shield, LH-CS. 13' Spreader | | AG332180 | Chain Shield, RH-409SS, 13' Spreader | | AG332179 | Chain Shield, LH-409SS, 13' Spreader | | AG133153 | Chain Shield, RH-304SS, 13' Spreader | | AG133157 | Chain Shield, LH-304SS, 13' Spreader | | AG133152 | Chain Shield, RH-CS, 14' Spreader | | AG133156 | Chain Shield, LH-CS, 14' Spreader | | AG331158 | Chain Shield, RH-409SS, 14' Spreader | | AG331159 | Chain Shield, LH-409SS, 14' Spreader | | AG133154 | Chain Shield, RH-304SS, 14' Spreader | | AG133158 | Chain Shield, LH-304SS, 14' Spreader | RoGator/TerraGator 287
- Page 237 and 238: Hypro Model 9910-D50 AGCO Part No.
- Page 239 and 240: Hypro Model 9910-D60 AGCO Part No.
- Page 241 and 242: Hypro Model 9910-D100 Hypro Model 9
- Page 243 and 244: Banjo Wet Seal 3" Cast Iron Self-Pr
- Page 245 and 246: Hydraulic Drive Scot Transfer Pump
- Page 247 and 248: Scot Self-Priming Pedestal Pump Mod
- Page 249 and 250: A GUIDE TO CLEANING YOUR SPRAYERS S
- Page 251 and 252: Spray tips don’t last forever! To
- Page 253 and 254: Technical Pages Please Note: For a
- Page 255 and 256: Technical Pages Please Note: For a
- Page 257 and 258: Clean Sprayers Help Prevent Crop In
- Page 259 and 260: Self-Propelled Table of Contents Ta
- Page 261 and 262: Cab Controls 1998-2003 Air Spread S
- Page 263 and 264: Cab Controls 2004 Liquid System App
- Page 265 and 266: Cab Controls 2006/2007 Air Spreader
- Page 267 and 268: Miscellaneous Cab Components The fo
- Page 269 and 270: TRANSMISSIONS Torq-Boost 18 Speed T
- Page 271 and 272: TerraShift Transmission with Tier l
- Page 273 and 274: 3104 Power Steering Control This co
- Page 275 and 276: Amber Rotating Beacon This amber be
- Page 277 and 278: Gauge Protector Protector has two 1
- Page 279 and 280: Pump/Electric Clutch - Tapered Shaf
- Page 281 and 282: Scot Pump Replacement Parts for AG5
- Page 283 and 284: Air Box 97-98 The air box is locate
- Page 285 and 286: Nozzle/Hose Shank Connectors Adapt
- Page 287: Fan Assembly The fan motor is bolte
- Page 291 and 292: G4 Spinner Blades 4 Blades required
- Page 293 and 294: Boom Pivot Arms The fastest way to
- Page 295 and 296: Conveyer Drive The AirMax 1000/2000
- Page 297 and 298: Injector Points Fruitland RCF 500 P
- Page 299 and 300: 1995-1996 Gauges Note: If replacing
- Page 301 and 302: 1995-96 844 & 854 Switches Notes: N
- Page 303 and 304: 2003-2008 864/1064/874/1074 Cab Con
- Page 305 and 306: 2000-2005 1254/1264 Mirrors Applica
- Page 307 and 308: 1996-1998 854 Air Conditioning Appl
- Page 309 and 310: ENGINE COMPONENTS Starters • 1996
- Page 311 and 312: Axle Wear Pads 1254/1264 Applicatio
- Page 313 and 314: Suspension 664, 93-94 Applications:
- Page 315 and 316: Suspension 854 99-02 Applications:
- Page 317 and 318: Suspension 864/1064/874/1074 Applic
- Page 319 and 320: 1998-2001 854 Sheet Metal Applicati
- Page 321 and 322: 2002 854 Air System Applications: 2
- Page 323 and 324: 2003-08 8/1064, 8/1074 Air System A
- Page 325 and 326: 2003-2004 864/1064/1264 Fenders App
- Page 327 and 328: 2003-2008 64/74/86C Ball Valve 1" E
- Page 329 and 330: 2003-2008 Foam Maker 64/74/86C All
- Page 331 and 332: 1993-1994 664 Pump Applications: 19
- Page 333 and 334: RoGator High Volume Pump Applicatio
- Page 335 and 336: Strainer 664/844 & 854 Std. Volume
- Page 337 and 338: 90 foot Boom Tips Applications: 90'
SPINNER SPREADER<br />
New Leader Hydraulic Filters<br />
• AG701734 - 1 Per L20FH Spreader<br />
• AG704136 - 1 Per L2020, L3020, L2020GT, L3020GT Spreader<br />
• AG704136 - 1 Per L2020 G4, L3020G4 Prior to Model Year 2004<br />
• AG715586 - 1 Per L2020G4, L3020G4 Starting with model year 2004<br />
and up<br />
• AG704136 - 2 Per L3020XP Spreader<br />
• AG704136 - 2 Per L322G4 Spreader<br />
• AG333623 - 1 Per L4000G4 Spreader<br />
Spinner Motor L30-20, L32-20, L4000<br />
AG704059 retainer ring does not use a seal excluder, AG705573,<br />
AG705950 retainer ring does use the excluder seal AG706573.<br />
| Part | Description |<br />
| 522466D1 | Hydraulic Oil Filter (1) |<br />
| AG704136 | Hydraulic Oil Filter (1) |<br />
| AG715586 | Filter, Hydraulic Return (2 used), Case Drain (1 used) |<br />
RoGator/TerraGator<br />
Spinner Motor L20-20<br />
AG704059 retainer ring does not use a seal excluder, AG706573,<br />
AG706590 retainer ring does use the excluder seal AG706573.<br />
| Ref | Part | Description |<br />
| 1 | AG704059 | Retainer Ring 1.625" ID |<br />
| 1a | AG706950 | Retainer Ring 1.8125" ID |<br />
| 3 | AG706573 | Shield Dust, Seal Excluder |<br />
| N/A | AG332694 | Spinner Motor |<br />
| 2 | AG704032 | Shaft Spinner Motor |<br />
| 4 | AG715839 | Seal |<br />
| 5 | AG703848 | O-Ring |<br />
| 6 | AG721915 | Bearing |<br />
| 7 | AG712603 | Cup |<br />
| 8 | AG708918 | Spacer |<br />
| 9 | AG841339 | Bushing |<br />
| 10 | AG707326 | Seal |<br />
| 11 | AG703824 | Gasket |<br />
| N/S | AG707507 | Key, Shaft to Fan Hub (1) |<br />
| N/S | AG711240 | Motor Repair Kit |<br />
| N/S | AG715838 | Motor Seal Kit |<br />
| N/S | AG706861 | Seal Driver Tool |<br />
| N/S | AG703965 | Installation Tool |<br />
| N/S | AG703968 | Wrench |<br />
| N/S | AG707105 | Speedy Sleeve, Shaft |<br />
| Ref | Part | Description |<br />
| N/A | AG332696 | Spinner Motor |<br />
| 1a | AG706950 | Retainer Ring 1.8125" ID |<br />
| 1 | AG704059 | Retainer Ring 1.625" ID |<br />
| 3 | AG706573 | Shield Dust, Seal Excluder |<br />
| 2 | AG704032 | Shaft Spinner Motor |<br />
| 4 | AG715839 | Seal |<br />
| 5 | AG703848 | O-Ring |<br />
| 6 | AG721915 | Bearing |<br />
| 7 | AG712603 | Cup |<br />
| | AG708918 | Spacer |<br />
| 8 | AG841339 | Bushing |<br />
| 9 | AG707326 | Seal |<br />
| 10 | AG703824 | Gasket |<br />
| | AG707507 | Key, Shaft to Fan Hub (1) |<br />
| 11 | AG703965 | Installation Tool |<br />
| N/S | AG715838 | Seal Kit |<br />
| N/S | AG059807 | Retainer Assembly |<br />
| N/S | AG707105 | Speedy Sleeve, Shaft |<br />
Servo Valves<br />
The Raven hydraulic servos are used starting with the 2006 models.<br />
The L3220G4 MultiApplier spreader uses two servo's the AG331352<br />
servo is used on the MultiApplier portion and the AG727549 is used on<br />
the main spreader hydraulics.<br />
| Part | Description |<br />
| AG521355 | Hydraulic Servo 13 GPM |<br />
| AG609806 | Hydraulic Servo 13 GPM |<br />
| AG608842 | Hydraulic Servo 18 GPM |<br />
| AG609250 | Hydraulic Control Valve 30 GPM with 20 ft Cord |<br />
| AG519498 | Hydraulic Control Valve 58 GPM with 20 ft Cord |<br />
| AG332769 | Servo Valve 13.8 GPM Mid Tech |<br />
| AG727549 | Hyd Servo 40 GPM L3020G4 Raven |<br />
| AG331351 | Hyd Servo 25 GPM L2020G4 Raven |<br />
| AG331352 | Hyd Servo 9 GPM L3220G4 Raven |<br />
286