Controllers - AGCO Parts

Pump/Electric Clutch - Tapered Shaft
(6" Pulley Diameter)
| Part | Description |
| AG324587 | Electric Clutch, 6" Pulley Diameter |
| AG700509 | Coil Only, Electric Clutch |
| AG319845 | Plate Clutch Mounting |
| AG512540 | Bearing Pump Side |
| AG703286 | Backplate |
| AG703283 | Casting Volute, 3" x 3" Hose Barb Ends |
| AG703284 | Impeller Iron |
| AG602744 | Tapered Shaft with 1 Bearing |
| AG602787 | O-Ring Casing - EPDM |
| AG602752 | Bearings (2 required) |
| AG513745 | Seal, Viton, 2" and 3" - 8 and 10HP |
| AG703226 | Key Impeller - Square |
| AG703227 | Flinger, Rubber |
| AG704640 | Impeller Retainer Assembly |
| AG703234 | Ret. Ring, Internal (2 required) |
| AG703238 | Key Half - Moon |
| AG562054 | Bolt BackPlate (2-required) |
Scott Pump Repair Parts for AG518411
The following parts are repair parts related to the AG518411 Scot 4" x
3" electric clutch driven liquid pump used on 1603, 1803, 1844, and
A2800 units in the mid to late '90's. This pump is the first version on
these machines to use the 3" outlet elbow with the victaulic coupling.
Notes: The short pump version does include the volute housing o-
ring and the electric clutch mounting plate. Spline shaft is shown but
pump uses tapered shaft. Plate mounting clutch and the key are not
shown.
| Ref | Part | Description |
| 1 | AG714622 | Volute Casting |
| 2 | AG703284 | Impeller Iron |
| 6 | AG703280 | Pump Shaft |
| 14 | AG703288 | Sleeve Shaft - Stainless Steel |
| 16 | AG512540 | Bearing Pump Side |
| 18 | AG514757 | Bearing - Pulley Side |
| 19 | AG703282 | Pedestal Frame |
| 26 | AG704640 | Impeller Retainer Assembly |
| 32 | AG703226 | Key Impeller - Square |
| 38 | AG703287 | O-Ring Shaft - Viton |
| 40 | AG703227 | Flinger, Rubber |
| 46 | AG703238 | Key Half - Moon |
| 73 | AG602787 | O-Ring Casing - EPDM |
| 73a | AG707131 | O-Ring Housing Viton |
| 83 | AG703286 | Backplate |
| 89 | AG523646 | Seal Shaft Mark ll (Standard) |
| 89a | AG513745 | Seal, Viton, 2" and 3" - 8 and 10HP |
| 193 | AG703315 | Retainer Bearing |
| A | AG319845 | Plate Clutch Mounting |
| F1 | AG714623 | Coupling for VIC Elbow 3" |
| F1a | AG718192 | Gasket for Victaulic Coupling |
| F2 | AG714624 | Elbow |
| N/S | AG710581 | Short Pump Asm with Mark ll Seal * |
RoGator/TerraGator
277