Controllers - AGCO Parts

Amber Rotating Beacon
This amber beacon is used on
industrial units. It adds visibility to
your machine increasing your safety
as well as others. Another use could
be to signal your tender driver that
you are coming in to reload.
Note: Check local and state laws
for use of beacons.
| Part | Description |
| AG522715 | Rotating Lamp Amber |
Hose Reel
Add a hose reel to your wash system for fast
and easy hose storage. All steel construction
and painted yellow. Fully assembled.
| Part | Description |
| AG712940 | Hose Reel |
“Safety Rinse”
Our gravity-flow, fresh water rinse
system provides an important measure
of safety for those dangerous
chemical spills and splashes. Kit
includes 8-gallon poly tank, quick onoff
1/4-turn valve, mounting brackets,
hose, and necessary fitting for installation.
An area approximately
20"Hx20"Wx13"D, either above (top
mount) or below (bottom mount) a flat
steel surface, is required for mounting.
| Part | Description |
| AG710502 | Top Mount |
| AG710503 | Bottom Mount |
Top Tank
For 56"-65" Diameter Tanks The Top
Tank is easily mounted on top of the
product tank to provide a source of
clean water for safety, washdown,
clean-up and flushing of product
tank. The poly 135-gallon tank
weighs 60 lbs. and has a 5" threaded
lid. When installed, it adds about 18" to the height of the product
tank. Withdrawal fitting for both left and right sides are required and
must be ordered separately. (See index for tank fittings.)
| Part | Description |
| AG711002 | Top Tank and Mounting Kit |
| AG711024 | Replacement Lid |
Mud Flap
The Ag-Chem heavy-duty mud flap.
| Part | Description |
| AG005336 | Mud Flap with Metal Mounting Strap 40" x 45" |
| AG320314 | Flap only 40" wide x 32" long |
| AG305255 | Flap only 40" wide x 45" long |
Safety Tread
| Part | Description |
| AG511757 | Safety Tread 4" x 24" |
| AG513863 | Safety Tread 12" x 24" |
Sonic Boom “20”
The Sonic Boom TM is intended for
use on liquid flotation applicators for
the purpose of applying post-emergence
chemicals. It consists of
seven individual sections of 1" stainless
steel pipe that easily clamp to
the existing floater's boom. Each
pipe is fed by a 3', 3/4" hose that quick couples into the floater's existing
60" nozzle outlet. A bowl strainer is also supplied for each of the five
pipe sections. Pipe sections have outlets spaced at 20" apart where 15"
drop hoses are attached. The Sonic Boom TM allows operators to extend
their season and boost their profits by covering more acres. So, for timely
post-application when crops are small, get the Sonic Boom TM .
Note: Nozzles are not included and must be ordered separately.
| Part | Description |
| AG050649 | For 60' Floater Booms |
| AG050650 | Extension Kit for 70' Floater Booms |
RoGator/TerraGator
273