02.07.2015 Views

Controllers - AGCO Parts

Controllers - AGCO Parts

Controllers - AGCO Parts

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

TerraShift Transmission with Tier ll Engine<br />

This transmission is used with 8103 and 8104's starting in 2003 with the<br />

Tier ll engines. The parts are the same on those as the AG521591<br />

Transmission, except for the ECU.<br />

| Part | Description |<br />

| AG328923 | Transmission/TerraShift |<br />

| AG799564 | Reman Advantage Transmission Power Shift 11 Speed |<br />

| AG120658 | ECU Starting in 2003 |<br />

| AG610114 | Filter, Transmission |<br />

| AG610342 | Switch, Oil Filter Bypass |<br />

| AG139072 | Gasket and Seal Kit |<br />

| AG330786 | Solenoid Assembly |<br />

Transmission Lubricant<br />

Synthetic lubricant recommended for Road-ranger<br />

transmissions. Ten speed units require 1-1/2 gallons<br />

while the eighteen speed will use 3-1/2 gallons.<br />

Note: 6 gallons per case. Price is per gallon.<br />

| Part | Description |<br />

| AG711023 | Transmission Lubricant |<br />

Clutches<br />

Applications:<br />

• 1603 & 1664 machines use 518105<br />

• 1803, 1844, and 2505 with L10 Cummins use 518104<br />

• 9105 & 2505 Cat & Detroit use 518106<br />

Note: For 1991 and older 1603/1664 you also need to order 1-<br />

320014, 1-518038, 1-318111 to install quick adjust clutch.<br />

| Part | Description |<br />

| AG518104 | Clutch 14" x 2" spline Kwick-Adjust |<br />

| AG518105 | Clutch 14" x 1.75" Kwick-Adjust |<br />

| AG518106 | Clutch 15.5" x 2" Spline Kwick-Adjust |<br />

| AG510343 | Pilot Bearing |<br />

| AG510211 | Clutch Brake for 1.75" Spline |<br />

| AG510270 | Clutch Brake for 2" Spline |<br />

AN53 Low Speed Axle<br />

This axle was used on the early 1603. The AN53 low speed axle center<br />

section has the flat cover on the topside. S/N 1612147 and below.<br />

Notes: There is a core charge added to new axles and Reman<br />

Advantage axles. The amount credited depends on the condition of<br />

the core.<br />

| Part | Description |<br />

| AG712434 | AN53 Low Speed Axle |<br />

| AG799974 | Reman Advantage AN53 Low Speed Axle |<br />

| AG714339 | Brake Kit (1 kit per axle) |<br />

| AG707619 | Breather for JD AN52, AN53 |<br />

| AG711034 | Bearing Kit Outboard (2 kits per axle) |<br />

| AG712900 | Bearing Kit - Center Section |<br />

AN53 High Speed Axle<br />

The AN53 axle center section has<br />

the flat cover on the top side also<br />

has axle mounted park brake pads.<br />

• 1603 - S/N 1612157 First machine<br />

with High Speed Axle<br />

• 1803 - S/N 1823331 Last machine<br />

with High Speed Axle<br />

Notes: There is a core charge<br />

added to new axles and Reman Advantage axles. The amount credited<br />

depends on the condition of the core.<br />

| Part | Description |<br />

| AG711591 | AN53 High Speed Axle |<br />

| AG799973 | Reman Advantage AN53 High Speed Axle |<br />

| AG712841 | Brake Kit ( 2 per Axle) |<br />

| AG707619 | Breather for JD AN52, AN53 |<br />

| AG711034 | Bearing Kit Outboard (2 kits per axle) |<br />

| AG712901 | Bearing Kit Center Section |<br />

Teammate II Axle<br />

This axle was used on 1992 and early 1993 1603T and 1803's. The<br />

Teammate II axle center section has a flat cover on the front side. The<br />

brakes on this axle use the tangs instead of the dowel pins.<br />

Notes: There is a core charge added to new axles and Reman<br />

Advantage axles. The amount credited depends on the condition of<br />

the core. Contact us for parts on the pre-1992 Teammate II axles.<br />

| Part | Description |<br />

| AG799975 | Reman Advantage Teammate II Axle |<br />

| AG714513 | Brake Kit (1 per axle) |<br />

| AG719687 | Outboard Bearing Kit (2 per axle) |<br />

| AG712530 | Bearing Kit Complete Axle |<br />

| AG609239 | Breather for JD Teammate (3/8 in. NPT) |<br />

Teammate II with Air Brake<br />

This axle was first used in late 1993<br />

and is on 1603's, 1803's, and<br />

8103's. It has the external brakes<br />

with the air canister mounted on the<br />

axle.<br />

Notes: There is a core charge<br />

added to new axles and Reman<br />

Advantage axles. The amount<br />

credited depends on the condition of the core. There are no serviceable<br />

parts inside the air canister.<br />

| Part | Description |<br />

| AG518881 | Teammate II with Air Brake |<br />

| AG799976 | Reman Advantage Teammate II with Air Brake |<br />

| AG609239 | Breather for JD Teammate (3/8 in. NPT) |<br />

| AG060331 | LH Slack Adjuster |<br />

| AG716227 | RH Slack Adjuster |<br />

| AG714543 | Brake Kit, 4 per axle |<br />

| AG714601 | Seal, Outer Axle Shaft |<br />

| AG523776 | Stud Bolt 7/8 |<br />

| AG523369 | Washer, Flat - Hardened 0.94 - Black (28 per) |<br />

| AG714604 | Air Chamber, Brake |<br />

| AG715813 | Clevis Asm for Air Brake Chamber |<br />

| AG723940 | Breather Tube Kit for Air Brake Chamber |<br />

RoGator/TerraGator<br />

269

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!