Controllers - AGCO Parts

Ace Pumps
Model FMC-200-HYD-210: AGCO Part No. 000161
Model FMC-200-HYD-304: AGCO Part No. 054349
Model FMC-200-HYD-310: AGCO Part No. 0001162
8
9
5
6
7
3
4
2
1
15
20
Technical Pages
18
17
11
Note: Items 18 and 19 are not
13 12
accurate drawing representations
13 14
for the 210 model. Use for
11 12
10
7A
part number reference only.
Ref. Qnty VPN Ag-Chem Description
No. Req’d No.
1 4 41110 - Pipe plug, 1/8” NPT
1 4 41120 - Pipe plug, 1/8” NPT, stainless steel (opt)
2 1 41526 000180 Volute, 2”x1-1/2”, cast iron
3 1 40391 - Nut, 3/8” NF, cad plated locknut
4 1 40400 000038 Washer, 3/8” star, stainless steel
5 1 41525 000097 Impeller, cast iron, with keyway
6 1 40005 856856 O-ring, body seal
7 1 40151 000015 Seal, mechanical, Viton (inc. 40160 O-ring)
7 1 40152 009556 Seal, mechanical, Silicon Carbide (includes 40160 O-Ring) (opt)
8 1 40300 000028 Mounting frame (for 200 series hyd. motor)
8 1 40301 007650 Mounting frame (for 300 series hydraulic motor)
9 4 40950 - Cap screw, 3/8” NC x 3/4” hex head (for 304/310 motors)
9 4 40930 000071 Cap screw, 3/8” NC x 3/4” hex head, stainless steel (opt.)
10 1 41130 000080 Slinger
11 2 40810 000060 Snap ring, internal, BAC-14 mounting frame
12 2 40870 000066 Ball bearing, sealed, BAC-6 shaft
13 2 40790 000058 Snap ring, external, BAC-6 shaft
14 1 40795 050603 Spacer for BAC-6 shaft
15 1 40420 000041 Key, 1/8” x 1/8” x 1/2”
16 1 40061 002738 Shaft, 5/8” diameter, keyway and tang, s.s.
16 1 40063 060171 Shaft, 5/8” diameter, extended keyway and tang, s.s. (date code E-9 and up)
17 1 40162 060209 Seal support spacer
18 1 41380 000089 Coupling for hydraulic motor
19 1 41375 000088 Hydraulic motor 8GPM
19 1 41381 055358 Hydraulic Motor 10GPM
19 1 41378 000184 Hydraulic Motor 16GPM
20 4 41257 - Cap screw for 210 motor
20 4 41330 - Cap screw for 304/310 motor
# 1 052700 - Repair kit for FMC Series
# 1 041371 000139 Repair kit for 210 motor
# 1 041361 055359 Repair kit for 304 motor
1 041379 000140 Repair kit for 310 motor
16
19
Please Note: For a complete AGCO part number; please add AG to the front of the six digit number.
218