Controllers - AGCO Parts

Nylon Component Parts for Triple Nozzle
Hypro ProFlo Nozzle Body
The Hypro ProFlo nozzle bodies have the
highest flow rates in the industry with spraying
capacity up to 7 gpm at 40 PSI back pressure.
This allows you to move through the
fields faster and still get the coverage you
expect from a quality Hypro product. ProFlo
nozzle bodies have replaced the ARAG nozzle
bodies used on Ag-Chem machines in
2008.
Note: Comes standard with an 8 PSI diaphragm check valve.
| Part | Description |
| 532468D1 | Nozzle Body 3/4" 3 outlet EPDM |
| 513297D1 | Nozzle Body 1" 5 outlet EPDM |
| Ref | Part |Description |
| 1 | AG609736 | Body 3/4" |
| 1 | AG609922 | Body 1" |
| 2 | AG427068 | Anti-Drip Assembly, EPDM 4 PSI, |
| | |Red with Orange Plunger |
| 2 | AG427069 | Anti-Drip Assembly, VITON 4 PSI, |
| | |Green with Orange Plunger |
| 2 | AG330430 | Anti-Drip Assembly, EPDM 8 PSI, |
| | |Red with Black Plunger |
| 2 | AG427070 | Anti-Drip Assembly, VITON 8 PSI, |
| | |Green with Black Plunger |
| 2 | AG426323 | Anti-Drip Assembly, EPDM 12 PSI, |
| | |Red with White Plunger |
| 2 | AG427071 | Anti-Drip Assembly, VITON 12 PSI, |
| | |Green with White Plunger |
| 2 | AG427072 | Anti-Drip Assembly, EPDM 20 PSI, |
| | |Red with Gray Plunger |
| 2 | AG427073 | Anti-Drip Assembly, VITON 20 PSI, |
| | |Green with Gray Plunger |
| 2 | AG427074 | Anti-Drip Assembly, EPDM 25 PSI, |
| | |Red with Blue Plunger |
| 2 | AG427075 | Anti-Drip Assembly, VITON 25 PSI, |
| | |Green with Blue Plunger |
| 3 | AG609738 | Diaphragm - EPDM |
| 3 | AG053265 | Diaphragm - Viton |
| 4 | AG609739 | End Cap |
| 5 | AG609748 | Clamp Top 3/4" |
| 5 | AG609921 | Clamp Top 1" |
| 6 | AG053274 | O-Ring for 1/2" Clamp |
| 6 | AG609741 | O Ring for 3/4 & 1" Clamp |
| 7 | AG609918 | O-Ring EPDM |
| 7 | AG726239 | O-Ring Viton |
| 8 | AG609743 | Triple Body |
| 10 | AG609745 | Pin |
| 11 | AG563096 | Screw 10-24 x.75 SS |
| | AG563095 | Nut 10-24 SS |
Wet Boom Nozzle Assembly with Diaphragm
Check Valve
For 3/4" and 1" pipe or tube. Requires 3/8" mounting
hole. 8 PSI diaphragm shut-off. *For acid solutions
use polypropylene valve.
| Part | Description |
| AG518660 | Diaph. Chk Valve - Nylon - 3/4" Wet Boom |
| AG519561 | 1" Nylon |
| AG519040 | 3/4" Poly* |
| AG520056 | 1" Poly* |
Blanks for Wet Booms
Used to seal 3/8" hole in wet boom pipe when nozzle
assembly is not required. Use poly for acid solutions.
| Part | Description |
| AG518661 | 3/4" Nylon |
| AG519564 | 1" Nylon |
| AG716758 | 3/4" Poly |
| AG520077 | 1" Poly |
Nozzle Accessories
189