Controllers - AGCO Parts
Controllers - AGCO Parts Controllers - AGCO Parts
Spray Tips Delavan ® 1/4" Raindrop ® Nozzles This is a wide-angle (120°), hollow-cone, drift-reduction nozzle. Replaces conventional flooding nozzles in broadcast applications. | Part | Description | | AG002172 | RA4 - Red | | AG002186 | RA6 - Gray | | AG002173 | RA8 - White | | AG002176 | RA10 - Tan | | AG005230 | RA15 - Lt. Blue | Delavan 3/4" Raindrop Nozzles This is a wide-angle (140°), hollow-cone, drift-reduction nozzle. Replaces conventional flooding nozzles in high-volume, high-speed broadcast applications with flotation or truck-mounted equipment. Features: • Color-coding of the popular sizes makes it easy to match nozzle flow rates for easy identification; Made of color-coded Zytel ® nylon; Body is color-coded; cap will be black; Other sizes will be all black • Reduces drastically the amount of driftable spray particles or "fines" (droplets under 100 micrometers) • Uniform spray distribution • A large orifice opening and passages minimize clogging Delavan ® RA Nozzles The Raindrop nozzle's patented design element, a secondary swirl chamber in the nozzle cap, alters the swirling action of the liquid so that fewer driftable "fines" are discharged from the secondary orifice. Zytel is a registered trademark of E.I. duPont de Nemours, Inc. Specific gravity and viscosity of solution may affect the flow of R.A. Raindrop nozzle somewhat differently than flood nozzles. Therefore, we recommend using the flow rate (GPA) of the nozzle based on water as the base calibration point. Notes: Maximum recommended pressure, nylon: 100 PSIG (700 kPa). Maximum recommended temperature 120° F (50° C). It is not recommended to space nozzles wider than 60 inches. | Part | Description | | AG002170 | RA-20 Nozzle, 140° | | AG008418 | RA-25 Nozzle, 140° | | AG002169 | RA-30 Nozzle, 140° | | AG002819 | RA-35 Nozzle, 140° | | AG002168 | RA-50 Nozzle, 140° | | AG002817 | RA-60 Nozzle, 140° (Dark Green) | | AG028372 | RA-70 Nozzle, 140° | | AG002164 | RA-80 Nozzle, 140° (Red) | | AG028376 | RA-90 Nozzle, 140° | | AG002165 | RA-100 Nozzle, 140° (Tan) | | AG002816 | RA-120 Nozzle, 140° (Purple) | | AG028386 | RA-180 Nozzle, 140° | | AG007873 | RA-240 Nozzle, 140° (Gold) | | AG007874 | RA-260 Nozzle, 140° | 160
TeeJet Stainless Steel Orifice Discs Spray is uniformly distributed in a cone pattern with good atomization. The core actually produces the cone-shaped pattern. Disc-core nozzles are common in spraying insecticides at higher pressures. Disc tips are also suitable for wettable powders and other erosive products. Ceramic discs and cores are also available for superior wear resistance. Notes: For metal disc and core, use quick attach cap No. AG055225 and gasket No. AG008922. For ceramic disc and core combination use cap and gasket set No. AG055227. | Part | Description | | AG001519 | D1 Orifice Disc | | AG006629 | D1.5 Orifice Disc | | AG001520 | D2 Orifice Disc | | AG001522 | D3 Orifice Disc | | AG001523 | D4 Orifice Disc | | AG001524 | D5 Orifice Disc | | AG001525 | D6 Orifice Disc | | AG001526 | D7 Orifice Disc | | AG001527 | D8 Orifice Disc | | AG001528 | D10 Orifice Disc | | AG001529 | D12 Orifice Disc | | AG001530 | D14 Orifice Disc | | AG050107 | D16 Orifice Disc | TeeJet Ceramic Orifice Discs Quick TeeJet Systems require a special cap and gasket set for ceramic disc/core combination, use No. AG055227. Notes: When metal disc and core are used, special cap and gasket are required. Cap, black No. AG055225, Gasket EPR No. AG008922 or Viton No. AG053885. For ceramic disc and core combination, use cap and gasket set No. AG055227. | Part | Description | | AG009854 | DCER-2 Orifice Disc | | AG009858 | DCER-3 Orifice Disc | | AG009857 | DCER-4 Orifice Disc | | AG051292 | DCER-5 Orifice Disc | | AG052849 | DCER-6 Orifice Disc | | AG051293 | DCER-7 Orifice Disc | | AG052153 | DCER-8 Orifice Disc | | AG052860 | DCER-10 Orifice Disc | Hardened Stainless Steel Cores Notes: Cores #13, 23, 25, 45, and 46 produce a hollow cone spray pattern. Cores # 31, 33, 35, and 56 produce full cone pattern. | Part | Description | | AG008752 | DC35 - HSS | | AG001562 | DC23 - HSS | | AG001565 | DC25 - HSS | | AG001575 | DC45 - HSS | Spray Tips 161
- Page 111 and 112: Air Couplings Allow fast, easy conn
- Page 113 and 114: Polypropylene “Y” Strainers •
- Page 115 and 116: Model 126 Strainers 1-1/4", 1-1/2",
- Page 117 and 118: Model 124 1-1/2" Strainer Parts Hyp
- Page 119 and 120: In-Line Strainer 3/4" NPT inlet, br
- Page 121 and 122: INSECTICIDES TEEJET CONTACT SYSTEMI
- Page 123 and 124: Spray Tips 121
- Page 125 and 126: Turbo TeeJet ® Spray Tips Typical
- Page 127 and 128: Turbo TwinJet ® Typical Applicatio
- Page 129 and 130: 80° XRVS TeeJet Spray Tips Caps fo
- Page 131 and 132: XRC Tip and Cap Combination Extende
- Page 133 and 134: Hypro Ultra Lo-Drift Nozzles The Ul
- Page 135 and 136: Hypro Guardian Spray Tips Guardian
- Page 137 and 138: 80° VisiFlo Spray Tips • The tip
- Page 139 and 140: Drift Guard Twin Jet DG TeeJet Drif
- Page 141 and 142: DG TeeJet 80° Spray Tips Drift Gua
- Page 143 and 144: TeeJet Brass Flat Spray Tips 73° S
- Page 145 and 146: Air Induction Turbo TwinJet | Part
- Page 147 and 148: AIXR TeeJet Spray Tip Features: •
- Page 149 and 150: AIC Tip and Cap Combination The AIC
- Page 151 and 152: Air Bubble Jet Spray Tip Revolution
- Page 153 and 154: Greenleaf AirMix ® Nozzles The Air
- Page 155 and 156: Greenleaf TurboDrop ® XL Venturi N
- Page 157 and 158: Spray Tips 155
- Page 159 and 160: TeeJet 95° E Series VisiFlo Even F
- Page 161: Albuz Ceramic Hollow Cone Nozzles T
- Page 165 and 166: XP BoomJet Typical Applications:
- Page 167 and 168: Boom X Tender Boomless Nozzles X Te
- Page 169 and 170: StreamJet 3 Fertilizer Nozzles Feat
- Page 171 and 172: ESI Six Stream Spray Tips ESI Six S
- Page 173 and 174: Spray Tips 171
- Page 175 and 176: CP Floater Nozzles CP Floater Check
- Page 177 and 178: Flow Regulators Flow regulators are
- Page 179 and 180: Turbo FloodJet ® Spray Tips Wide A
- Page 181 and 182: Quick FloodJet Nozzles Wide-angle,
- Page 183 and 184: Raindrop Flood Nozzle Quick Coupler
- Page 185 and 186: Slotted Strainers Nozzle Shanks Nyl
- Page 187 and 188: Clamps (Square) | Part | Descriptio
- Page 189 and 190: Triple Nozzles for Wet Booms Quick
- Page 191 and 192: Nylon Component Parts for Triple No
- Page 193 and 194: Quick TeeJet Shut-Off Cap Used to s
- Page 195 and 196: Gaskets Only | Part | Description |
- Page 197 and 198: High-Volume Agitator Glass-filled p
- Page 199 and 200: Model 43 Spray Guns Designed and bu
- Page 201 and 202: 30° ConeJet ® Adjustable Spray Ti
- Page 203 and 204: AGCO Permatran ® 821XL AGCO Permat
- Page 205 and 206: Safety Tank FDA approved, 9-gallon,
- Page 207 and 208: Electronic Wind/Temp/Humidity Meter
- Page 209 and 210: Ride-Rite ® Helper Air Springs The
- Page 211 and 212: GPI ® Electronic Digital Meter Flo
TeeJet Stainless Steel Orifice Discs<br />
Spray is uniformly distributed in a cone pattern with<br />
good atomization. The core actually produces the<br />
cone-shaped pattern. Disc-core nozzles are common<br />
in spraying insecticides at higher pressures. Disc tips<br />
are also suitable for wettable powders and other erosive<br />
products. Ceramic discs and cores are also<br />
available for superior wear resistance.<br />
Notes: For metal disc and core, use quick attach cap No. AG055225<br />
and gasket No. AG008922. For ceramic disc and core combination use<br />
cap and gasket set No. AG055227.<br />
| Part | Description |<br />
| AG001519 | D1 Orifice Disc |<br />
| AG006629 | D1.5 Orifice Disc |<br />
| AG001520 | D2 Orifice Disc |<br />
| AG001522 | D3 Orifice Disc |<br />
| AG001523 | D4 Orifice Disc |<br />
| AG001524 | D5 Orifice Disc |<br />
| AG001525 | D6 Orifice Disc |<br />
| AG001526 | D7 Orifice Disc |<br />
| AG001527 | D8 Orifice Disc |<br />
| AG001528 | D10 Orifice Disc |<br />
| AG001529 | D12 Orifice Disc |<br />
| AG001530 | D14 Orifice Disc |<br />
| AG050107 | D16 Orifice Disc |<br />
TeeJet Ceramic Orifice Discs<br />
Quick TeeJet Systems require a special cap and gasket set for ceramic<br />
disc/core combination, use No. AG055227.<br />
Notes: When metal disc and core are used, special cap and gasket<br />
are required. Cap, black No. AG055225, Gasket EPR No. AG008922 or<br />
Viton No. AG053885. For ceramic disc and core combination, use cap<br />
and gasket set No. AG055227.<br />
| Part | Description |<br />
| AG009854 | DCER-2 Orifice Disc |<br />
| AG009858 | DCER-3 Orifice Disc |<br />
| AG009857 | DCER-4 Orifice Disc |<br />
| AG051292 | DCER-5 Orifice Disc |<br />
| AG052849 | DCER-6 Orifice Disc |<br />
| AG051293 | DCER-7 Orifice Disc |<br />
| AG052153 | DCER-8 Orifice Disc |<br />
| AG052860 | DCER-10 Orifice Disc |<br />
Hardened Stainless Steel Cores<br />
Notes: Cores #13, 23, 25, 45, and 46 produce a hollow cone spray<br />
pattern. Cores # 31, 33, 35, and 56 produce full cone pattern.<br />
| Part | Description |<br />
| AG008752 | DC35 - HSS |<br />
| AG001562 | DC23 - HSS |<br />
| AG001565 | DC25 - HSS |<br />
| AG001575 | DC45 - HSS |<br />
Spray Tips<br />
161