Controllers - AGCO Parts
Controllers - AGCO Parts Controllers - AGCO Parts
Spray Tips Hypro GuardianAIR The Hypro GuardianAIR is the only spray tip with a pattern and droplet size scientifically designed to maximize coverage and productivity at spray rates around 10 GPA. This technology was originally developed by Hypro for the Syngenta Amistar nozzle and has been proven on millions of acres around the world. GuardianAIR spray tips boost productivity, control, and profitability using a patented combination of innovations. They are air-induced to reduce drift and boost on-target spray deposition, yet are tuned to provide more droplets per gallon than any comparable air induced tip. Those coverage-boosting droplets are delivered at an optimized incline that provides more uniform coverage on the entire plant, front and back. | Part | Description | | AG427580 | Nozzle, GA110-015 | | AG427582 | Nozzle, GA110-02 | | AG427583 | Nozzle, GA110-025 | | AG427584 | Nozzle, GA110-03 | | AG427585 | Nozzle, GA110-035 | | AG427586 | Nozzle, GA110-04 | | AG427587 | Nozzle, GA110-05 | | AG427588 | Fast Cap, GA110-015 | | AG427589 | Fast Cap, GA110-02 | | AG427590 | Fast Cap, GA110-025 | | AG427591 | Fast Cap, GA110-03 | | AG427592 | Fast Cap, GA110-035 | | AG427593 | Fast Cap, GA110-04 | | AG427594 | Fast Cap, GA110-05 | 148
Air Bubble Jet Spray Tip Revolutionary Air Bubble Jet spray tips draw air into the stream of liquid being sprayed improving chemical contact with the leaf and greatly reducing drift. The number of small droplets is reduced, limiting drift, and air bubbles are created in the larger droplets causing them to collapse on contact with the leaf and disperse evenly. The Air Bubble Jets overcome the problems of conventional jet nozzles that form both large droplets that run off the leaves and small droplets that drift. Air Bubble Jets can be used for pull type or high clearance sprayers, and are also ISO color-coded (i.e. if you use a yellow 0.2, now you would use a yellow 0.2 Bubble Jet.) • Up to 58% less drift compared to conventional drift reduction nozzles. • Proven experience • No high pressure required to operate properly, as in other air induction nozzles. Operate at normal pressure similar to an extended range, 20- 90 PSI (30-45 PSI is the best operating range for drift control and exceptional plant coverage). • Uniform droplet sizing (350 micron) for outstanding plant coverage. • 100-degree tapered edge flat spray pattern for uniform coverage in broadcast spraying. • Made of Chemital for long wearing durability. Easy to take apart for cleaning. Note: Air Bubble Jets are only packaged and sold in quantities of 10. | Part | Description | | AG129615 | 100.1 Air Bubble Jet Tip (Orange) | | AG059620 | 100.15 Air Bubble Jet Tip (Green) | | AG059621 | 100.2 Air Bubble Jet Tip (Yellow) | | AG059622 | 100.25 Air Bubble Jet Tip (Purple) | | AG059623 | 100.3 Air Bubble Jet Tip (Blue) | | AG427692 | 100.35 Air Bubble Jet Tip (Brown Red) | | AG059624 | 100.4 Air Bubble Jet Tip (Red) | | AG059625 | 100.5 Air Bubble Jet Tip (Brown) | | AG427693 | 100.6 Air Bubble Jet Tip (Grey) | Spray Tips Caps for Air Bubble Jet Tips | Part | Description | | AG055185 | Nozzle Cap with Gasket - Green | | AG055186 | Nozzle Cap with Gasket - Yellow | | AG055184 | Nozzle Cap with Gasket - Blue | | AG055183 | Nozzle Cap with Gasket - Red | | AG055187 | Nozzle Cap with Gasket - Brown | Twin Cap for Air Bubble Jet • Excellent spray coverage from front and rear jets • Faster speeds and higher volumes • Increased crop penetration and coverage • Ideal for foliage crops (i.e. potatoes and sugar beets) and fungicide application Notes: Spray tips must be ordered from available sizes above. Holder includes nozzle caps. | Part | Description | | AG426086 | Twin Bubble Jet Holder - Low Profile | 149
- Page 99 and 100: Viton Gaskets Note: AG009979 gasket
- Page 101 and 102: 45° and 90° Street Elbows Couplin
- Page 103 and 104: Coupling Flanged Y 45° Note: Full
- Page 105 and 106: Garden Hose Fittings Swivel Barbs M
- Page 107 and 108: 90° Elbows 45° St. Elbows Malleab
- Page 109 and 110: Type 304 Stainless Steel Fittings-
- Page 111 and 112: Air Couplings Allow fast, easy conn
- Page 113 and 114: Polypropylene “Y” Strainers •
- Page 115 and 116: Model 126 Strainers 1-1/4", 1-1/2",
- Page 117 and 118: Model 124 1-1/2" Strainer Parts Hyp
- Page 119 and 120: In-Line Strainer 3/4" NPT inlet, br
- Page 121 and 122: INSECTICIDES TEEJET CONTACT SYSTEMI
- Page 123 and 124: Spray Tips 121
- Page 125 and 126: Turbo TeeJet ® Spray Tips Typical
- Page 127 and 128: Turbo TwinJet ® Typical Applicatio
- Page 129 and 130: 80° XRVS TeeJet Spray Tips Caps fo
- Page 131 and 132: XRC Tip and Cap Combination Extende
- Page 133 and 134: Hypro Ultra Lo-Drift Nozzles The Ul
- Page 135 and 136: Hypro Guardian Spray Tips Guardian
- Page 137 and 138: 80° VisiFlo Spray Tips • The tip
- Page 139 and 140: Drift Guard Twin Jet DG TeeJet Drif
- Page 141 and 142: DG TeeJet 80° Spray Tips Drift Gua
- Page 143 and 144: TeeJet Brass Flat Spray Tips 73° S
- Page 145 and 146: Air Induction Turbo TwinJet | Part
- Page 147 and 148: AIXR TeeJet Spray Tip Features: •
- Page 149: AIC Tip and Cap Combination The AIC
- Page 153 and 154: Greenleaf AirMix ® Nozzles The Air
- Page 155 and 156: Greenleaf TurboDrop ® XL Venturi N
- Page 157 and 158: Spray Tips 155
- Page 159 and 160: TeeJet 95° E Series VisiFlo Even F
- Page 161 and 162: Albuz Ceramic Hollow Cone Nozzles T
- Page 163 and 164: TeeJet Stainless Steel Orifice Disc
- Page 165 and 166: XP BoomJet Typical Applications:
- Page 167 and 168: Boom X Tender Boomless Nozzles X Te
- Page 169 and 170: StreamJet 3 Fertilizer Nozzles Feat
- Page 171 and 172: ESI Six Stream Spray Tips ESI Six S
- Page 173 and 174: Spray Tips 171
- Page 175 and 176: CP Floater Nozzles CP Floater Check
- Page 177 and 178: Flow Regulators Flow regulators are
- Page 179 and 180: Turbo FloodJet ® Spray Tips Wide A
- Page 181 and 182: Quick FloodJet Nozzles Wide-angle,
- Page 183 and 184: Raindrop Flood Nozzle Quick Coupler
- Page 185 and 186: Slotted Strainers Nozzle Shanks Nyl
- Page 187 and 188: Clamps (Square) | Part | Descriptio
- Page 189 and 190: Triple Nozzles for Wet Booms Quick
- Page 191 and 192: Nylon Component Parts for Triple No
- Page 193 and 194: Quick TeeJet Shut-Off Cap Used to s
- Page 195 and 196: Gaskets Only | Part | Description |
- Page 197 and 198: High-Volume Agitator Glass-filled p
- Page 199 and 200: Model 43 Spray Guns Designed and bu
Air Bubble Jet Spray Tip<br />
Revolutionary Air Bubble Jet spray tips draw air into<br />
the stream of liquid being sprayed improving chemical<br />
contact with the leaf and greatly reducing drift.<br />
The number of small droplets is reduced, limiting<br />
drift, and air bubbles are created in the larger<br />
droplets causing them to collapse on contact with the<br />
leaf and disperse evenly. The Air Bubble Jets overcome<br />
the problems of conventional jet nozzles that<br />
form both large droplets that run off the leaves and<br />
small droplets that drift. Air Bubble Jets can be used<br />
for pull type or high clearance sprayers, and are also ISO color-coded<br />
(i.e. if you use a yellow 0.2, now you would use a yellow 0.2 Bubble Jet.)<br />
• Up to 58% less drift compared to conventional drift reduction nozzles.<br />
• Proven experience<br />
• No high pressure required to operate properly, as in other air induction<br />
nozzles. Operate at normal pressure similar to an extended range, 20-<br />
90 PSI (30-45 PSI is the best operating range for drift control and exceptional<br />
plant coverage).<br />
• Uniform droplet sizing (350 micron) for outstanding plant coverage.<br />
• 100-degree tapered edge flat spray pattern for uniform coverage in<br />
broadcast spraying.<br />
• Made of Chemital for long wearing durability. Easy to take apart for<br />
cleaning.<br />
Note: Air Bubble Jets are only packaged and sold in quantities of 10.<br />
| Part | Description |<br />
| AG129615 | 100.1 Air Bubble Jet Tip (Orange) |<br />
| AG059620 | 100.15 Air Bubble Jet Tip (Green) |<br />
| AG059621 | 100.2 Air Bubble Jet Tip (Yellow) |<br />
| AG059622 | 100.25 Air Bubble Jet Tip (Purple) |<br />
| AG059623 | 100.3 Air Bubble Jet Tip (Blue) |<br />
| AG427692 | 100.35 Air Bubble Jet Tip (Brown Red) |<br />
| AG059624 | 100.4 Air Bubble Jet Tip (Red) |<br />
| AG059625 | 100.5 Air Bubble Jet Tip (Brown) |<br />
| AG427693 | 100.6 Air Bubble Jet Tip (Grey) |<br />
Spray Tips<br />
Caps for Air Bubble Jet Tips<br />
| Part | Description |<br />
| AG055185 | Nozzle Cap with Gasket - Green |<br />
| AG055186 | Nozzle Cap with Gasket - Yellow |<br />
| AG055184 | Nozzle Cap with Gasket - Blue |<br />
| AG055183 | Nozzle Cap with Gasket - Red |<br />
| AG055187 | Nozzle Cap with Gasket - Brown |<br />
Twin Cap for Air Bubble Jet<br />
• Excellent spray coverage from front and<br />
rear jets<br />
• Faster speeds and higher volumes<br />
• Increased crop penetration and coverage<br />
• Ideal for foliage crops (i.e. potatoes and<br />
sugar beets) and fungicide application<br />
Notes: Spray tips must be ordered from<br />
available sizes above. Holder includes nozzle<br />
caps.<br />
| Part | Description |<br />
| AG426086 | Twin Bubble Jet Holder - Low Profile |<br />
149