Controllers - AGCO Parts

LSQ Strainer Parts
Model 122 Strainer, 3/4"
Strainers
| Part | Description |
| AG006444 | 6 Mesh Screen 1-1/2" & 2" |
| AG000992 | 12 Mesh Screen 1-1/2" & 2" |
| AG000993 | 20 Mesh Screen 1-1/2" & 2" |
| AG000947 | 30 Mesh Screen 1-1/2" & 2" |
| AG000994 | 50 Mesh Screen 1-1/2" & 2" |
| AG006434 | 80 Mesh Screen 1-1/2" & 2" |
| AG050708 | EPDM Gasket, Cap |
| AG055290 | Viton Gasket, Cap |
| AG050707 | Cap Assembly |
Polypropylene “Y” Strainers
Banjo's Y-type strainers
are made of glass-reinforced
poly for extra strength. They are lightweight
with stainless steel screens. T-handle
clamp is also stainless steel and cap has 1/2"
drain plug. 50 PSI maximum pressure rating.
Notes: To receive a complete strainer, order the strainer body assembly
plus the screen mesh of your choice. Screens on next page.
| Part | Description |
| AG053052 | 3" Strainer Body |
“Y” Strainer Replacement Parts, 3"
| Part | Description |
| AG007481 | 4 Mesh Screen |
| AG007482 | 8 Mesh Screen |
| AG007749 | 12 Mesh Screen |
| AG007343 | 20 Mesh Screen |
| AG007748 | 50 Mesh Screen |
| AG057608 | End Plug |
| AG057552 | Drain Plug |
| AG057551 | O-Ring, Prime/Drain Plug |
| AG053889 | Gasket for Body Top |
| AG057604 | Gasket for Body Bottom |
| AG057605 | Clamp S.S. |
| AG057607 | Body, Bottom |
Model 122 Strainer, 1/2"
Glass-reinforced polypropylene
with EPDM gasket and stainless
steel screen, this compact strainer is only 4-1/4" high,
3-1/16" in length, and 2-1/4" wide. The 1/2" size has
an approximate flow rate of 12 GPM while the 3/4"
size is up to 16 GPM with only 5 PSI pressure drop.
Maximum 150 PSI at 100°F.
| Part | Description |
| AG050211 | 16 Mesh |
| AG050212 | 30 Mesh |
| AG050213 | 50 Mesh |
| AG050214 | 80 Mesh |
| AG050210 | 100 Mesh |
| Part | Description |
| AG050215 | 16 Mesh |
| AG050216 | 30 Mesh |
| AG050217 | 50 Mesh |
| AG050219 | 80 Mesh |
| AG050220 | 100 Mesh |
Model 122 Repair Parts
For 1/2" and 3/4" TeeJet Model 122 Strainers.
| Part | Description |
| AG050499 | 1/2" Head |
| AG050500 | 3/4" Head |
| AG050502 | EDPM Gasket |
| AG050503 | Viton Gasket |
| AG050504 | Bowl |
| AG050501 | 16 Mesh Screen |
| AG050414 | 30 Mesh Screen |
| AG050415 | 50 Mesh Screen |
| AG056662 | 80 Mesh Screen |
| AG050416 | 100 Mesh Screen |
Model 126 Strainers 3/4", 1" and Flanged
TeeJet's AA126 Glass-Filled
Polypropylene Flush out Line
Strainer.
Features:
• 200 PSI maximum pressure rating
• Strainer head and bowl are made of polypropylene
with EPDM gasket
• Screens are made of 304SS with color coded
polypropylene frames and are removable for
cleaning
• Removable cap and o-ring for flush out or selfcleaning
operations
• Integral mounting provision allows the strainer
to be attached to machine using 5/16" (3/4", 1")
or 3/8" (1-1/4", 1-1/2") bolts
Note: For a complete strainer order the strainer assembly plus the
screen of your choice.
| Part | Description |
| AG426885 | Strainer Asm 3/4" |
| AG426886 | Strainer Asm 1" |
| AG426887 | Strainer Asm F50 Flange |
| AG001930 | Screen 16 Mesh SS - Gray |
| AG001933 | Screen 30 Mesh SS - Yellow |
| AG001931 | Screen 50 Mesh SS - Red |
| AG001932 | Screen 80 Mesh SS - Blue |
| AG051631 | Screen 100 Mesh SS - Green |
| AG053503 | Screen 200 Mesh SS - Orange |
112