Operating Instructions C07569 Bantam Hand Tool - Band-It
Operating Instructions C07569 Bantam Hand Tool - Band-It
Operating Instructions C07569 Bantam Hand Tool - Band-It
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Operating</strong><br />
<strong>Instructions</strong><br />
<strong>C07569</strong><br />
<strong>Bantam</strong> <strong>Hand</strong> <strong>Tool</strong><br />
Nose of <strong>Tool</strong> <strong>Hand</strong>le Locking Pin<br />
Winding Mandrel<br />
Angle Position<br />
Straight Position<br />
Tension Release<br />
Levers<br />
Ratchet <strong>Hand</strong>le<br />
Winding Knob<br />
(Also Hammer Surface)<br />
Cutter <strong>Hand</strong>le<br />
<strong>Hand</strong>le in Pistol Grip<br />
Position<br />
Pistol Grip Position:<br />
1. With the <strong>Bantam</strong> <strong>Tool</strong> in the Pistol Grip<br />
Position, place the band in the tool with<br />
sufficient band in the winding mandrel.<br />
2. With ratcheting action, tension the band until<br />
clamp is tight. If necessary, band may be<br />
repositioned by releasing tension with levers.<br />
Straight or Angle Position:<br />
3. Roll tool over as far as tool will go, and push<br />
forward cutter handle. Remove tool and tap<br />
down ears of clip to complete clamp. Remove<br />
excess material from winding mandrel.<br />
1. With the <strong>Bantam</strong> <strong>Tool</strong> in the Straight<br />
Position, place the band in the tool with<br />
sufficient band in the winding mandrel.<br />
2. With ratcheting action, tension the band until<br />
clamp is tight.<br />
3. Roll tool over as far as tool will go, and push<br />
forward cutter handle. Remove tool and tap<br />
down ears of clip to complete clamp.<br />
BAND-IT-IDEX, Inc.<br />
A Unit of IDEX Corporation<br />
4799 Dahlia Street<br />
Denver, CO 80216-3070 USA<br />
P: 1-800-525-0758<br />
F: 1-800-624-3925<br />
www.BAND-IT-IDEX.com<br />
Page 1 of 3<br />
Document # P36287 Rev. C<br />
© Copyright<br />
BAND-IT-IDEX, Inc. 2009<br />
All rights reserved
Assembly<br />
<strong>C07569</strong><br />
<strong>Bantam</strong> <strong>Hand</strong> <strong>Tool</strong><br />
*<br />
*<br />
* ITEM 27 (SPRING)<br />
REQUIRES “C10999” FOR<br />
PROPER INSTALLATION.<br />
BAND-IT-IDEX, Inc.<br />
A Unit of IDEX Corporation<br />
4799 Dahlia Street<br />
Denver, CO 80216-3070 USA<br />
P: 1-800-525-0758<br />
F: 1-800-624-3925<br />
www.BAND-IT-IDEX.com<br />
Page 2 of 3<br />
Document # P36287 Rev. C<br />
© Copyright<br />
BAND-IT-IDEX, Inc. 2009<br />
All rights reserved
Repair Parts<br />
<strong>C07569</strong><br />
<strong>Bantam</strong> <strong>Hand</strong> <strong>Tool</strong><br />
* NOTE: ITEM 27 (SPRING) REQUIRES RATCHET SPRING TOOL FOR PROPER INSTALLATION. ORDER PART NUMBER C10999<br />
FOR RATCHET SPRING TOOL AND C09099 FOR SPRING KIT (INCLUDES THREE SPRINGS).<br />
*<br />
Refer to website for warranty information: http://www.band-it-idex.com/pages/warranty.html<br />
BAND-IT-IDEX, Inc.<br />
A Unit of IDEX Corporation<br />
4799 Dahlia Street<br />
Denver, CO 80216-3070 USA<br />
P: 1-800-525-0758<br />
F: 1-800-624-3925<br />
www.BAND-IT-IDEX.com<br />
Page 3 of 3<br />
Document # P36287 Rev. C<br />
© Copyright<br />
BAND-IT-IDEX, Inc. 2009<br />
All rights reserved