Thermal Solutions Boiler Controller To Building Automatio
Thermal Solutions Boiler Controller To Building Automatio
Thermal Solutions Boiler Controller To Building Automatio
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Thermal</strong> <strong>Solutions</strong> ProtoNode Start Up guide Page 15 of 32<br />
4 CONNECT THE PROTONODE’S WEB GUI TO SETUP IP ADDRESS FOR<br />
BACNET/IP<br />
4.1 Connect the PC to the ProtoNode via the Ethernet port<br />
Ethernet Port<br />
0<br />
Figure 6: Ethernet port location of ProtoNode<br />
<br />
<br />
Connect a standard CAT5 Ethernet cable (straight through or cross) between the PC and ProtoNode<br />
The Default IP Address of the ProtoNode is 192.168.1.24, Subnet Mask is 255.255.255.0. If the PC and<br />
the ProtoNode are on different IP Networks, assign a static IP Address to the PC on the 192.168.1.xxx<br />
network<br />
Go to > ><br />
<br />
Right-click on Local Area Connection > Properties<br />
Highlight ><br />
<br />
Select: Use the following IP address<br />
Click twice<br />
ProtoCessor 1991 Tarob Court Milpitas, California 95035 USA Web: www.protocessor.com<br />
Tel: (408) 964 4444 Fax: (408) 964 4425 <strong>To</strong>ll Free: (800) 317 8319 x141 email: support@protocessor.com