AAC SPECIFICATION 418002 ISSUE 3 HYDRAULIC HOSE ...

APPENDIX A : RELATED DOCUMENTS
AAC SPECIFICATION 418002
HYDRAULIC HOSE & FITTINGS FOR USE IN
COAL MINING APPLICATIONS
ISSUE 3
COPYRIGHT
The latest issue of the following documents shall be deemed to form part of this specification:
AAC QAP 100 : Quality management system for critical and major equipment
AAC QAP 163 : Concession request requiring customer approval
BS 3592 Part 2 : Steel wire for rubber hose reinforcement
DIN 1651 : Free cutting steels; Technical conditions of delivery
EN ISO 6945 : Rubber hoses – Determination of abrasion resistance of the outer cover
EN 853 : European Specification – Wire braid reinforced hydraulic rubber hoses
and hose assemblies
EN 856 : European Specification – Spiral wire reinforced hydraulic hoses and hose
assemblies
SAE J343 : Test procedures for SAE 100R series hydraulic hose and assemblies
SAE J516 : Hydraulic hose fittings
SAE J517 : Hydraulic hose
SAE J1176 : Cool Down Leakage performance
SABS Method 876 : Resistance to flaming of vulcanized rubber
APPENDIX B : RECORD OF AMENDMENTS
Issue 1 : Definitions amended. Clause 1.0; 150°C was 125°C
Clause 5.0 amended
Clause 7.2.4 amended (M. Capper)
Issue 2 : Clause 4.3.4 amended (R.T. Mcloughlin)
Issue 3 : (5 year review) Title changed to Coal Mining Applications. Specification updated to
include new EN/ISO standards (G. Dryden 2001/05/087)
AAC_SPEC_41800203 APPROVED 8 May 1991 Page 10 of 10
Anglo Technical Division accepts no liability for any damage whatsoever that may result from the use of this material or
the information contained therein, irrespective of the cause and quantum thereof.