Well-proven and indestructible: the Kroll multi oil heater - Kroll GmbH

Well-proven
and indestructible:
the Kroll multi oil heater

This heater is particularly
suitable for heating car-workshops,
warehouses etc.
The units feature an internal
vaporising burner and a self
contained oil tank.
They are easy to install and
immediately ready for use.
n The fan works silently and
does not require much
maintenance. It can be put
onto the heater in several
ways to all four directions.
n The 24 l tank is equipped with
an integrated oil strainer and an
electromagnetic gear pump to
supply the vaporising burner
with oil.
Technical data and dimensions W 401-L W 401-K
Heat input kW 35 35
Heat output kW 29 29
Air rate m³/ h – 580
Nominal air rate m³/ h – 460
Temperature increase (ΔT) Kelvin 80 80
Tank content Liter 24 24
Oil consumption kg/h 1,9 – 2,8 1,9 – 2,8
Electrical consumption kW 0,03 0,09
Electrical connection Volt/A 230/0,1 230/0,4
Flue gas pipe Ø mm 150 150
Width mm 600 600
Depth mm 770 770
Height mm 1000 1170
Weight kg 66 99
n The integrated overflow switch
turns off the electromagnetic
gear pump and thus avoids an
oil leakage.
n For a quick and efficient
cleaning, we offer a suitable
slag solvent.
n After the ignition (when the
combustion chamber has
reached a temperature of 55°C),
an integrated thermostat turns
on the fan and the electromagnetic
gear pump.
n In Germany, the combustion of
waste oil is only permitted
in plants of over 100 kW and
there also only with a special
permission. The multi oil heater
has no approval in Germany.
Kroll GmbH
Pfarrgartenstrasse 46
D – 71737 Kirchberg / Murr
Phone 0049 (0)7144 / 830 200
Fax 0049 (0)7144 / 830 201
e-mail vertrieb@kroll.de
web www.kroll.de
Universal oil heater 11/10
Technical data subject to change without notice
More information on the Kroll
product range on www.kroll.de