EPA EST No. 59072-NJ-001 (JT Eaton 182B Glue Board): Item 182B

JT EATON 182B GLUE BOARD
SECTION 1 • IDENTIFICATION
IDENTITY:
JT EATON 182B GLUE BOARD
EPA Registration No. NONE
TRADE NAME/SYNONYMS: Mouse & Rat Traps
CHEMICAL FAMILY: Hot Melt Adhesive/Thermoplastic
Manufacturered for:
J.T.EATON & CO., INC.
1393 East Highland Road
Twinsburg, Ohio 44087
Date Prepared: June 15,2014
Emergency Telephone Number: 1-800-664-9042 or
National Pesticide Telecommunications Network at 1-800-858-7378
Telephone Number for Information:
9 AM to 5 PM EST - 330-425-7801
SECTION 2 HAZARDOUS INGREDIENTS
HAZARDOUS COMPONENTS
NONE
CAS NUMBER
SECTION 3 • PHYSICAL / CHEMICAL DATA
OPTIONAL
PEL STEL CEILING ACGIH TLV %
N/A N/A N/A N/A N/A
This Material Safety Data sheet is prepared to comply with the United States Occupational Safety and Health Administration (OSHA)
Hazard Communication Standard (29 CFR 1910.1200) and the Canadian Workplace Hazardous Material Information System (WHMIS).
Unlisted ingredients are not "hazardous" per the OSHA standard and/or are not found on the WHMIS ingredient disclosure list.
BOILING POINT: (F): No Data.
MELTING POINT: No Data.
FREEZING POINT: No Data.
VAPOR DENSITY: (AIR = 1): N/A
EVAPORATION RATE (Butyl Acetate = 1): N/A
SOLUBILITY IN H 2 O: Insoluble in water.
SHELF LIFE: 1 Year In Original Packaging.
SPECIFIC GRAVITY (H 2 O = 1): 0.93
VOLATILES: NIL.
PERCENT VOLATILE: NO DATA.
VAPOR PRESSURE: (mm hg): No Data.
VAPOR DENSITY: Heavier than air.
VOLATILE ORGANIC COMPOUNDS: Not Determined.
SECTION 4 • FIRE & EXPLOSION HAZARD DATA
AUTOIGNITION TEMPERATURE: NO DATA.
FLASH POINT (Method Used) - >400° F
UPPER EXPLOSION LIMITS (%): Unknown.
LOWER EXPLOSION LIMITS (%): Unknown.
EXTINGUISHING MEDIA: Alcohol Foam, Carbon Dioxide
(CO2) or Water Spray,
FIRE & EXPLOSION HAZARDS: Material will burn in a fire.
NFPA FLAMMABILITY HAZARD CLASS: N/A.
SPECIAL FIRE FIGHTING PROCEDURES: Wear self contained
breathing apparatus and Protective Clothing to prevent
contact with skin and eyes.
SECTION 5 • REACTIVITY DATA
CHEMICAL STABILITY: Stable.
INCOMPATIBLE MATERIALS: None known.
NFPA REACTIVITY HAZARD CLASS: 0
HAZARDOUS POLYMERIZATION: Will not occur.
HAZARDOUS DECOMPOSITION PRODUCTS: High temperatures
(450° F or above) are to be avoided as small
amounts of Acrolein can be generated. Incomplete combustion
can produce Carbon Monoxide, Carbon Dioxide,
various hydrocarbons, acrolein and acetic acid.
SECTION 6 • HEALTH EFFECTS AND FIRST AID
SKIN CONTACT: No known effects.
FIRST AID: N/A
EYE CONTACT: Irritant as a foreign body. Immediately flush eyes with
large amounts of water for at least 15 minutes. Do not attempt to
remove material. Get immediate medical attention.
FIRST AID: N/A
INGESTION: Small amounts are not anticipated to be harmful. Do not
induce vomiting. Get medical attention if symptoms develop.
ANTIDOTE : N/A

M ATERIAL S AFETY D ATA S HEET
SECTION 7 • SPILL AND LEAK PROCEDURES
1393 East Highland Road
Twinsburg, OH 44087 • U.S.A.
Sweep up and dispose.
SECTION 8 • STORAGE AND DISPOSAL
Store in a cool, dry place. Waste disposal should be in accordance with existing federal, state
and local environmental regulations. Dispose of waste material in a sanitary landfill or incinerate
in an industrial, commercial or municipal incinerator.
SECTION 9 • CONDITIONS TO AVOID
None known.
SECTION 10 • PROTECTIVE EQUIPMENT
None needed.
SECTION 11 • TOXICITY
ORAL LD50, SPECIES TESTED: N/A
NOTES ON ORAL TOXICITY: Adhesive, if ingested, will
cause no damage to organs.
\
NOTES ON DERMAL TOXICITY: None known.
NOTES ON INHALATION TOXICITY: None.
SECTION 12 • LONG TERM EFFECTS OF EXPOSURE
EFFECTS OF CHRONIC EXPOSURE: None known.
TARGET ORGANS: None known.
SECTION 13 • TRANSPORTATION DATA
Non-Hazardous for transportation - Not required by DOT-HMR
Manufacturer makes no warranty, express or implied,
other than indicated on Label and MSDS. Customer
assumes all risk of use and/or handling of this material
when such use and / or handling is contrary to Label
and MSDS.
All information contained in this Material Safety Data Sheet is furnished free of charge and is intended for your evaluation. In our opinion
the information is, as of the date of this Material Safety Data Sheet, reliable, however, it is your responsibility to determine the suitability
of the information for your use. You are advised not to construe the information as absolutely complete since additional information may
be necessary or desirable when particular, exceptional or variable conditions or circumstances exist or because of applicable laws or
government regulations. Therefore, you should use this information only as a supplement to other information gathered by you and you
must make independent determinations of the suitability and completeness of the information from all sources to assure both proper use
of the material described herein and the safety and health of employees. Accordingly, no guarantee expressed or implied is made by
J.T. Eaton & Co., Inc. as to the results to be obtained based upon your use of the information nor does J.T. Eaton & Co., Inc. assume any
liability arising out of your use of the information.
JT EATON 182B GLUE BOARD
EPA Registration No. NONE
Page 2