Manual Of Desiccant Dehumidifier

8
Manual Of Desiccant Dehumidifier
NZD-6218
Thank you for choosing our desiccant dehumidifier. Please be sure to read this user's manual carefully before using the
machine.Any problem,please contact the professional service for help.
OPERATING
INSTRUCTIONS

Table Of Contents
Brief Instruction
Safeguards
Unit Placement
Parts Name
Control Panel
Function Keys & Indicators
Operating andWarnings
Filter Cleaning
Water-full Indicator andWater-tank Empty
Continuous draining
Body Cleaning
Power Cord Maintenance and replacement
Before Storing
Trouble Shooting
Specifications
Warranty
P3
P3
P4
P4
P5
P5
P6
P6
P6
P7
P7
P7
P7
P7
P8
P9
P2 .

Brief Instruction
1.Advantages of desiccant dehumidifier
At present , desiccant dehumidification is the best dehumidification
technique.Without compressor and refrigerant,it can prevent from
the environmental pollution of noise and refrigerant.It is a high-tech
product with these advantages :energy-efficient ,environmentalfriendly
,low noise & light body.
2. Advantages of our NZD-6218
1.High-tech,healthy & fashion
Intelligent control panel with light-touch function keys &
indicators,quiet running & efficient air-cleaning give you a
perfect using feeling.
2.Perfect work at very low temperature:
•Cannot be infected by temperature ,keep powerful
dehumidifying at very low temperature
•Owns clothes-drying function.
•Blows warm air at very low temperature to up the room
temperature by 3-8℃,makes the room air
Conformably warm and dry.
3.Intelligent & User’s friendly function mode :
•Dehumidify Mode:High/Middle/Low speed
•Laundry Mode :Low speed
•Timer :8 h/ 4h/2h
•Air-blows angles:front / wide-angle
4.Water-full alarm & auto-stop function
5.Water-level windows on body side
6.Folding handle for machine easily moving
3.Safeguards
1.Please use separated and qualified power socket Use poor
quality socket or more than one machine used in one power
socket or non-standard power connection will make machine
damage or cause fire accident.
2.This unit is only for indoor use and suitable for ambient
temperature/humidity of:1~40 ℃ />25%RH
In order to avoid danger,the unit must be kept away from direct
sunshine ,heat source ,explosive gas,plenty of dust and chemical
environment.
3.In order to avoid inner parts damage,do not use this unit
without air filter.
4.In order to avoid damage ,keep any articles away from the air
inlet and air outlet
5..Except for ventilation,generally close the door and windows
to get better dehumidification.
P3 .

Unit Placement
Unit Placement
•Please place the unit on the flat ground to avoid water leakage.
noise or other abnormal situation.
•Please place the unit at a safe distance away from wall or
furniture for good aircirculation.
•Please keep the clothes at least 40 cm fromthe unit air outlet to
Top above at least 60CM
Air Outlet
At least 40CM
Air inlet
Parts Name
Handle
Control Pane
Air outlet
Water-level window
Water tank
Air inlet
Filter
Continuous Drainage Hole
P4 .

Control Panel
Laundry Mode Indicators
Timer Indicators
Timer
8h
4h
2h
TIMER
SWING
LAUNDRY
DEHUMIDIFY
Dehumidify Mode Indicators
Laundry Mode Indicators
Dehumidify Mode
Louver settings
Check Indicators
Water Full Indicator
ION Indicator
FULL
ION
POWER
Laundry Mode
PowerOnOff / Indicators
PowerOnOff /
ION
Function Keys & Indicators
• Plug into the power supply and press the “ ON/OFF”
key to
turn on the unit .To turn off the unit,press the“ ON/OFF”
key
again.
The power indicator will be green as soon as it switches
on.
• Press dehumidify mode key to select Low-Middle-High speed,
corresponding indicator turns on.
• Press Laundry mode key to select low speed , laundry
mode indicator turns on..
• Press louvers setting key to set louvers swing direction :
front→above→hold ,corresponding indicator turns on .
Front : Air comes out from front with the louvers swing
angle scale about 0 to 60 .
Above:
Air comes out from front with the louvers swing
angle scale about 30 to 90
Hold:
Louvers stop to swing.
• PressTimer key to setting 8 h/ 4h/ 2h timer.
To press timing key 8 h/4 h/2 h,
the indicating light turns on
separately. When choosing 8 h, the 8h indicating light turns
on.
With the unit running,the 4h light will be on.Meanwhile,the
8h light is off.Then the 2h light turns on while the 4h light is off
until the unit stops.
• Press ION key ,ION function works to clean the air .
• Check indicator
When there is machine fault ,check indicator turns on .
Warning : Please press function keys softly,
rudely press may
cause keys damage.
P5 .

Operating andWarnings
1.Please use separated and qualified power socket.
2.Plug to power ,press ON/OFF key to turn-on the machine;
re- press ON/
OFF key to turn-off the machine.
3.Make sure water-tank is placed correctly.If incorrectly,water
full indicator will turn on and machine cannot work.
4. Machine first start , default dehumidify speed is “ LOW ”,
please press function keys to select your function.
5. If turn on the machine but not unplug the power machine
will keep the mode before turning on for next using.
6.
When unplug the power ,please use one hand to press the
power socket to avoid power cord damage or electric-leakage
or fire .
Warning :
Use poor quality socket or more than one machine used in
one power socket or non-standard power connection will
make machine damage or cause fire accident.
Please press ON/OFF key to turn-off the machine, don'
t only
by unplug the power.
After machine turn-off ,fan will keep running about 1 minut
to output the heat . If need to unplug the power
pleaswait till to the fan stop running absolutely.
Filter Cleaning
If filter is covered by plenty of dust,
the airflow and the
performance of the unit will be affected,
even cause
machine damage,then need to often clean the filter:
1.Turn off the unit and remove the filter from the unit.
2.Clean the filter with a vacuum cleaner or soft-brush.
3.Replace the filter in position.
Water-full Indicator andWater-tank Empty
1.When the water-tank is full, water-full indicator turns on and
the machine stops.
2.Hold the grabbing portion at the bottom of water-tank to
move it out and then carry it with its handle.
3.Open the water-tank cover to empty it .
4.Clean the water-tank to avoid incrustation
5.Close the water-cover and replace it , the water-full indicator
turns-off and machine re-work.
Warning :
Don'
t move out the water-tank at the moment of unit-stop,
please wait a while to avoid the water dripping into the unit to
cause unit-damage,even electric-shock.
Please clean the water-tank with soft- cloth wetted only by
clean-water,don' t by detergent , heat-water or other no
clean- water .
Don'
t move or damage the floater in water-tank,otherwise
the machine cannot work well.
Please make sure the water-tank cover and handle are
replaced correctly before water-tank replacement .
If the water-tank is replaced incorrectly ,water-tank indicator
will not turn off,please re-place it again .
P6 .

Continuous draining
( )
This dehumidifier has a continuous drain hole connecting with a
plastic pipe .The water in the body will all drain through the
continuous drain hole.(Optional drainage pipe required)
Body Cleaning
1.Before cleaning or maintaining, turn off the unit and unplug the
cord.
2.Air-inlet and air-outlet may gather dust easily,please clean it
often with a soft cloth wetted with water or soft detergent .
Warning:
• In order to avoid damage, do not let the water into the machine
when cleaning .
• Never spray any paint , solvent or chemical to the unit, which
could cause case deformation or fire.
Power Cord Maintenance and Replacement
Before Storing
If the power cord being damaged, it could be cause danger such
as short circuit or fire. It should be avoided from damage by
pulled strongly,twisted,mice bite or pressed.
If the power cord being damaged, power off and unplug it.
Contact professional service for help,
do not try to repair it
yourself.
Trouble Shooting
1. Turn off the unit and unplug the power cord after air-outlet
absolutely stop.
2. Clean and dry the water- tank.
3. Clean the filter,air-inlet,air-outlet and unit body.
4. Cover the unit to prevent it from gathering dust. Store it in a
cool and dry place.
Troubles Cause
1. Power-off
1. Power-on
2.Power supply is abnormal
2.Repair power supply
The unit cannot work
3. Wate-tank displaced or full 3. Water tank placement,
empty water-tank
,
4.Room temperature is too high OR air-outlet is covered 4. Lower room temperature,
clear air -outlet
,
1. Filter is blocked.
1.Clean the filter
The unit performance 2. Door & windows are open
2. Close door & windows
bad
3. Air-inlet or out - let is blocked.
/
3. Clean air- inlet & air-outlet
1.Locate the machine on the flat floor
Too Noisy 1.Unit is not placed on flat floor
2.Filter is blocked
2.Clean the filter
Solution
Note: when the trouble cannot solved by the solutions above,
please contact professional serviceman for help,don'
t repair it by yourself.
P7 .

Specifications
Model
NZD-6218
Dehumidify Capacity
Power supply
Current
Power
8L/day(30℃,80%RH)
220-240V AC/50HZ
2.8A
630W
Working Temperature 1-40℃
Noise
≤42dB
Water tank Capacity
Net Weight
Body Size
2L
6.5Kg
500X170X330mm
P8 .

Warranty
1.The product has one-year free warranty from the date of purchase.
2.The warranty shall not apply:(i) to any Product subjected to
accident,misuse,neglect,alteration, Acts of God,improper handling,
improper transport,improper use,improper testing or
unauthorized repair; or ( ii)
to cosmetic problems or defects
which result from normal wear and tear under ordinary use,and
do not affect the performance or use of the Product.All warranties
are void if the product is opened,altered,and/or damaged.
3.CUSTOMER MUST PRESENT THE SALES INVOICE OR
RECEIPT FOR FREE WARRANTY SERVICES.
4.Services Center:13/F Wilson Logistic Centre,24-28 Kung-Yip
Street,Kwai Chung.Hong Kong.
Service Hotline:(852) 2421 1210.Fax Hotline:(852) 3153 5223
5.The
unit is for domestic use only.
IMPORTANT NOTICES
IN NO EVENT SHALL OUR COMPANY OR THE SUPPLIER BE
LIABLE TO YOU OR ANY OTHER PARTY FOR ANY DIRECT,
INDIRECT, GENERAL, SPECIAL, INCIDENTAL,
CONSEQUENTIAL,
EXEMPLARY OR OTHER DAMAGES
ARISING OUT OF THE USE OR INABILITY TO USE THE
PRODUCT ( INCLUDING, WITHOUT LIMITATION,
DAMAGES
FOR INJURY, LOSS OF PROPERTY, BUSINESS PROFITS,
BUSINESS INTERRUPTION)
OR FROM ANY BREACH OF
WARRANTY,
EVEN IF OUR COMPANY OR SUPPLIER HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
IN NO CASE SHALL OUR COMPANY OR SUPPLIER’
S
LIABILITY EXCEED THE AMOUNT YOU PAID FOR THE
PRODUCT.
Specifications,
designs and dimensions subject to change without
prior notice.
P9 .