LTR20071000, Rev. B 5/30/07 - Cal Spas

Maintenance
Regardless of which “Clear Water Plan” you are using,
you should also do the following:
Every Month
1.
2.
3.
4.
Deep clean your spa’s filter. (Follow “filter cleaning”
instruction at beginning of “Clear Water Plan”)
Check inside the equipment area for leaks,
rodents, and insects.
If a leak is discovered, contact your Cal Spas
dealer for service.
If you see evidence of rodents or insects, take
necessary actions to remove them and precautions
to prevent them from returning.
Every 3 To 4 Months
1.
2.
Drain and clean your spa with “Multi-Purpose
Cleaner”.
Polish the acrylic surface with “Fast Sheen”.
3.
4.
5.
6.
Water Quality Maintenance
Clean and treat spa cover, pillows, and Cal Select
cabinet (if equipped) with “Cover Protector”.
When re-filling your spa, follow your specific “Clear
Water Plan” Start Up procedures.
If you are using the Cal Clarity Automatic Bromine
Generator Clear Water Plan, don’t forget to add
new TRU BLU sodium bromide to the water.
If you use the Cal Inline Sanitation System “Clear
Water Plan”, don’t forget to replace the Mineral and
Bromine Cartridges.
Once A Year
1.
2.
3.
Clean and treat redwood spa cabinets and
gazebos with “Nu-Spa Redwood Stain Renew and
Brightener”.
If you use the Cal Zone Quest 2000 Ozonator, you
will need to replace the ozone cartridge.
Check the filter cartridge pleats. If they are frayed,
replace the cartridge.
2007 Portable Spa Owner’s Manual Page 33
LTR20071000, Rev. B