24.06.2015 Views

LTR20071000, Rev. B 5/30/07 - Cal Spas

LTR20071000, Rev. B 5/30/07 - Cal Spas

LTR20071000, Rev. B 5/30/07 - Cal Spas

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Operating Your Spa<br />

Adjustable Jets<br />

Almost all of the jets in your spa are adjustable.<br />

Rotating the face of an adjustable jet to the left<br />

(counter-clockwise) will decrease the amount of water<br />

flow through the jet. Rotating the face of an adjustable<br />

jet to the right (clockwise) will increase the amount of<br />

water flow through the jet. (See example shown below.)<br />

Neck jets adjust in the opposite directions (counterclockwise<br />

to increase, clockwise to decrease).<br />

Diverter Knobs<br />

Diverter knobs are 1” and<br />

2” knobs located around the<br />

top of your spa. They allow<br />

you to divert water through<br />

jets from one side of the<br />

spa to the other, or in most<br />

cases from floor jets to wall<br />

jets. This is accomplished<br />

by rotating the diverter knob<br />

to the left (counterclockwise), decreasing the amount<br />

of water flow through a section of jets. To increase the<br />

amount of water flow through the other section of jets,<br />

rotate the handle to the right (clockwise).<br />

Air Venturis<br />

Air venturis are the 1” knobs<br />

located around the top of<br />

your spa. They can also be<br />

distinguished from diverter<br />

knobs by the arrows and the<br />

words “OFF”, “ON” and “AIR”<br />

marked on them. Each one<br />

will let you add a mixture<br />

of air with the jet pressure.<br />

This is accomplished by<br />

rotating the air venturi knob<br />

to the left (counter-clockwise) to increase the amount<br />

of airflow through the jets. To decrease the amount of<br />

airflow through the jets, rotate the handle to the right<br />

(clockwise).<br />

Adjustable Therapy System<br />

Pump On/Off<br />

This button allows the<br />

user to turn on and off the<br />

ATS seat pump. Press<br />

this button once to turn<br />

the pump on. Once on,<br />

the green LED light on the<br />

control panel will illuminate,<br />

indicating that the system<br />

is operational. To turn<br />

off the pump, press the<br />

“PUMP ON/OFF” button<br />

a second time. Note: The<br />

pump must be on prior to operating any other features<br />

of this system.<br />

Page 20<br />

20<strong>07</strong> Portable Spa Owner’s Manual<br />

<strong>LTR20<strong>07</strong>1000</strong>, <strong>Rev</strong>. B

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!