OPERATING AND MAINTENANCE INSTRUCTION ... - larius.org
OPERATING AND MAINTENANCE INSTRUCTION ... - larius.org
OPERATING AND MAINTENANCE INSTRUCTION ... - larius.org
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
STORM 4000<br />
H<br />
WORKING<br />
Start of the painting operations<br />
MIN<br />
1/2<br />
MAX<br />
English<br />
• Use the tooling after performing all the SETTING UP operations<br />
above described.<br />
• Dip the suction pipe into the product tank.<br />
• Open the petrol manifold (H1).<br />
H3<br />
• Press the key (H4) to ON (I).<br />
• Pull the start-up cord (H5) completely.<br />
H5<br />
H4<br />
ON (I)<br />
OFF (0)<br />
• Shift the lever (H2) depending on the temperature outside,<br />
as shown on the label below.<br />
H1<br />
H2<br />
• Open the safety-relief valve (H6) (turn clockwise so as the<br />
pin slides on the cam track).<br />
• Press the ON (I) switch (H7) of the equipment and turn a bit<br />
the pressure control knob clockwise (H8), so as the machine<br />
works at the idle speed.<br />
H7<br />
H7<br />
H8<br />
MARCIA<br />
RUNNING<br />
0<br />
ϒC<br />
32<br />
ϒF START<br />
0<br />
ϒC<br />
32<br />
ϒF<br />
• Lift the “START” lever (H3) dello "START" to the intermediate<br />
position.<br />
8
Change language