Restorative Procedure - Kerr Hawe

More documents

Recommendations

Info

All you need is Kerr Finishing and Polishing Restorative Procedure HiLuster Plus Polishing system 2-step polishing system for composites Features • High-gloss results in only 2 steps. Smooth surface and high gloss in two steps. • Efficient. Pre- and gloss polishing in one single step by efficient Gloss PLUS polishers, final roughness after first step around sRa 0.25 µm. • Diamond particles. Outstanding final result thanks to diamond particles integrated in the HiLuster PLUS polisher, final roughness around sRa 0.10 µm is achieved after second step. • Optimum flexibility. The flexibility of the polishers was optimized for excellent adaptation to the tooth anatomy. • Good adhesion between the mandrel and the polisher. Avoids that the abrasive parts come off. • Hygienic. Possibility to sterilize before first use in order to preserve the hygienic – can be autoclaved at 134 °C. Material of Polisher: Gloss PLUS Polishers Flame Part. No. 2651 Minipoint Part. No. 2652 Cup Part. No. 2653 Cup Part. No. 2654 GlossP: sRa=0.26 µm Gloss Plus Polisher: HiLuster Plus Dia Polisher: Aluminium oxide particles embedded into a silicone elastomer. (mean particle size: 20 microns) Silicone carbide and diamond particles (5 microns) embedded into a silicon elastomer. HiLuster PLUS Dia Polishers Flame Part. No. 2651 Minipoint Part. No. 2652 Material of Mandrel: Golden coated mandrel Cup Part. No. 2653 Cup Part. No. 2654 HiLust: sRa=0.10 µm 39
Usage on different surfaces Comparison HiLuster Polishing System and Enhance+PoGo polishing system used on Herculite XRV Ultra Gloss Plus Polisher 1: Reference surface OptiDisc coarse/medium OptiDisc sRa: 0.56 µm 2: Polishing Enhance + PoGo HiLuster PLUS Polishing system Flame Minipoint Minipoint Cup Enhance sRa: 0.6 µm Gloss PLUS sRa: 0.27 µm HiLuster Plus Dia Polisher 2: High Gloss PoGo HiLuster PLUS Polishing Polishing system Enhance sRa: 0.32 µm HiLuster PLUS Dia sRa: 0.14 µm Enhance is a very aggressive polisher, leaving high surface roughness. PoGo polisher has the ability to smooth the surface after Enhance but the final surface roughness sRa = 0.32 µm is not considered as high gloss surface. A much smoother and high gloss surface of sRa = 0.14 µm is achieved with 2-step HiLuster Polishing system. Flame Minipoint Minipoint Cup 40 Your practice is our inspiration.
Page 1 and 2: Clinical Guide for Restorative Proc
Page 3 and 4: Everyday challenge in restorative p
Page 5 and 6: STEP PRODUCT KERR PRODUCTS Adhesion
Page 7 and 8: Finishing and polishing Flexible di
Page 9 and 10: systems. Although they were the fir
Page 11 and 12: OptiBond OptiBond OptiBond FL So
Page 13 and 14: OptiBond FL Application Guide Opti
Page 15 and 16: OptiBond Solo Plus Application Gui
Page 17 and 18: OptiBond All-In-One Application Gu
Page 19 and 20: for resistance, biocompatibility, a
Page 21 and 22: When two monomers combine the molec
Page 23 and 24: Improved Handling Handling Comparis
Page 25 and 26: 7) Etching for 15 seconds with Gel
Page 27 and 28: 7) Application of a thin layer of P
Page 29 and 30: 9) First layer of Herculite XRV Ult
Page 31 and 32: 30 Your practice is our inspiration
Page 33 and 34: Tungsten carbide finishing burs var
Page 35 and 36: Surface treatment of composite fill
Page 37 and 38: Interproximal Surfaces Surface Roug
Page 39: Abrasive coating OptiDisc Kerr 200
Page 43 and 44: Herculite XRV References 1. Effect
Page 45: KerrHawe SA | Via Strecce 4 | P.O.B

Restorative Procedure - Kerr Hawe

Create successful ePaper yourself

Delete template?

Save as template?