Restorative Procedure - Kerr Hawe
Restorative Procedure - Kerr Hawe Restorative Procedure - Kerr Hawe
All you need is Kerr Finishing and Polishing Restorative Procedure HiLuster Plus Polishing system 2-step polishing system for composites Features • High-gloss results in only 2 steps. Smooth surface and high gloss in two steps. • Efficient. Pre- and gloss polishing in one single step by efficient Gloss PLUS polishers, final roughness after first step around sRa 0.25 µm. • Diamond particles. Outstanding final result thanks to diamond particles integrated in the HiLuster PLUS polisher, final roughness around sRa 0.10 µm is achieved after second step. • Optimum flexibility. The flexibility of the polishers was optimized for excellent adaptation to the tooth anatomy. • Good adhesion between the mandrel and the polisher. Avoids that the abrasive parts come off. • Hygienic. Possibility to sterilize before first use in order to preserve the hygienic – can be autoclaved at 134 °C. Material of Polisher: Gloss PLUS Polishers Flame Part. No. 2651 Minipoint Part. No. 2652 Cup Part. No. 2653 Cup Part. No. 2654 GlossP: sRa=0.26 µm Gloss Plus Polisher: HiLuster Plus Dia Polisher: Aluminium oxide particles embedded into a silicone elastomer. (mean particle size: 20 microns) Silicone carbide and diamond particles (5 microns) embedded into a silicon elastomer. HiLuster PLUS Dia Polishers Flame Part. No. 2651 Minipoint Part. No. 2652 Material of Mandrel: Golden coated mandrel Cup Part. No. 2653 Cup Part. No. 2654 HiLust: sRa=0.10 µm 39
Usage on different surfaces Comparison HiLuster Polishing System and Enhance+PoGo polishing system used on Herculite XRV Ultra Gloss Plus Polisher 1: Reference surface OptiDisc coarse/medium OptiDisc sRa: 0.56 µm 2: Polishing Enhance + PoGo HiLuster PLUS Polishing system Flame Minipoint Minipoint Cup Enhance sRa: 0.6 µm Gloss PLUS sRa: 0.27 µm HiLuster Plus Dia Polisher 2: High Gloss PoGo HiLuster PLUS Polishing Polishing system Enhance sRa: 0.32 µm HiLuster PLUS Dia sRa: 0.14 µm Enhance is a very aggressive polisher, leaving high surface roughness. PoGo polisher has the ability to smooth the surface after Enhance but the final surface roughness sRa = 0.32 µm is not considered as high gloss surface. A much smoother and high gloss surface of sRa = 0.14 µm is achieved with 2-step HiLuster Polishing system. Flame Minipoint Minipoint Cup 40 Your practice is our inspiration.
- Page 1 and 2: Clinical Guide for Restorative Proc
- Page 3 and 4: Everyday challenge in restorative p
- Page 5 and 6: STEP PRODUCT KERR PRODUCTS Adhesion
- Page 7 and 8: Finishing and polishing Flexible di
- Page 9 and 10: systems. Although they were the fir
- Page 11 and 12: OptiBond OptiBond OptiBond FL So
- Page 13 and 14: OptiBond FL Application Guide Opti
- Page 15 and 16: OptiBond Solo Plus Application Gui
- Page 17 and 18: OptiBond All-In-One Application Gu
- Page 19 and 20: for resistance, biocompatibility, a
- Page 21 and 22: When two monomers combine the molec
- Page 23 and 24: Improved Handling Handling Comparis
- Page 25 and 26: 7) Etching for 15 seconds with Gel
- Page 27 and 28: 7) Application of a thin layer of P
- Page 29 and 30: 9) First layer of Herculite XRV Ult
- Page 31 and 32: 30 Your practice is our inspiration
- Page 33 and 34: Tungsten carbide finishing burs var
- Page 35 and 36: Surface treatment of composite fill
- Page 37 and 38: Interproximal Surfaces Surface Roug
- Page 39: Abrasive coating OptiDisc Kerr 200
- Page 43 and 44: Herculite XRV References 1. Effect
- Page 45: KerrHawe SA | Via Strecce 4 | P.O.B
All you need is <strong>Kerr</strong><br />
Finishing and Polishing<br />
<strong>Restorative</strong> <strong>Procedure</strong><br />
HiLuster Plus Polishing system<br />
2-step polishing system for composites<br />
Features<br />
• High-gloss results in only 2 steps. Smooth surface and high gloss in two steps.<br />
• Efficient. Pre- and gloss polishing in one single step by efficient Gloss PLUS polishers,<br />
final roughness after first step around sRa 0.25 µm.<br />
• Diamond particles. Outstanding final result thanks to diamond particles integrated in the HiLuster PLUS<br />
polisher, final roughness around sRa 0.10 µm is achieved after second step.<br />
• Optimum flexibility. The flexibility of the polishers was optimized for excellent adaptation to the tooth<br />
anatomy.<br />
• Good adhesion between the mandrel and the polisher. Avoids that the abrasive parts come off.<br />
• Hygienic. Possibility to sterilize before first use in order to preserve the hygienic – can be autoclaved<br />
at 134 °C.<br />
Material of Polisher:<br />
Gloss PLUS Polishers<br />
Flame<br />
Part. No. 2651<br />
Minipoint<br />
Part. No. 2652<br />
Cup<br />
Part. No. 2653<br />
Cup<br />
Part. No. 2654<br />
GlossP: sRa=0.26 µm<br />
Gloss Plus Polisher:<br />
HiLuster Plus Dia Polisher:<br />
Aluminium oxide particles embedded into a silicone elastomer.<br />
(mean particle size: 20 microns)<br />
Silicone carbide and diamond particles (5 microns)<br />
embedded into a silicon elastomer.<br />
HiLuster PLUS Dia Polishers<br />
Flame<br />
Part. No. 2651<br />
Minipoint<br />
Part. No. 2652<br />
Material of Mandrel:<br />
Golden coated mandrel<br />
Cup<br />
Part. No. 2653<br />
Cup<br />
Part. No. 2654<br />
HiLust: sRa=0.10 µm<br />
39