SU Series - Cartridge List - Leaptronix

PCFACE Technical Information
Applications in Industrial Field
PC Extension Interface Protector has the extensive applications of industrial field. Usually, it can be used in three occasions as following.
● Research and Development department: For I/O designing or experimenting.
PCFACE Series
● Maintenance: To maintain all kinds of Interface Card.
There are a few problems which can disturb users' work or damage PC by using interface slot on PC:
B02
1. Short circuits caused by poor soldering within designs or experiment interfaces.
2. For unknown reasons, by using the ruined Interface Card will damage the main unit.
● Interface Card manufacturer: Using interface protector perform quality control upon interface cards to detect inferior goods.
LEAP ELECTRONIC presents PCFACE series which can prevent problems all of above.
PCFACE Series Features
● Avoid damaging PC during experiment.
● Prevent damages during Interface Card mending.
● Test on PCI- EXPRESS slots, users can rapidly find the inferior goods to prevent the damages that might threaten PCs.
● PCFACE series which is a protector of different motherboard types. Users can turn on/off PCFACE series instead of turning on/off the whole
PC system. It is convenient and time saving, especially in testing.
● Prevent malfunctioning from short circuits occurring on the slot by the power protection in PCFACE series.
● The Extension Interface protector protects all signals that are sent to the motherboard, therefore it will not damage the PC or interface
card.
● No need for turning off PC, Interface Card can be removed or inserted anytime.
● All signal cables and power have isolation function.
● Built in signal extension system, all signals can be tested on extension slot.
● Four layer designed, low noise and with high stability.
● LED Overload indication.
Application in Education Field
PC plays an important role in industrial fields in terms of its high-speed development, reliable, low price, and various functions. Hardware
interface circuit and controlled software complement each other in Microcontroller system. Engineers in this field must fully understand the
skills of hardware interface and software designs that function efficiently in microcontroller system.
Laboratories relating to either educational or academic fields, most tutors aren’t willing to teach this section for the following reasons:
● It will damage the PC when poor soldering occurs in experiments on circuit boards.
● Loosing component parts or causing damages from dismantling PC cases.
● It is a waste of time to restart if there are mistakes happening during experiments, due to the necessary load and save process.
For solving above problems, simply plug in PCFACE series.
www.leap.com.tw www.leaptronix.com E-mail: lillian@leap.com.tw TEL:+886-2-2999-1860#15 Lillian Huang