Mobile Column Lift EHB Premium - Heka.pl

Mobile Column Lift EHB ® Premium 

EHB807V11-4, capacity 4 x 7.5 tonne = 30 tonne 

• The columns can be moved easily for versatile 

use indoors or outdoors. 

• Ergonomic operation from any column; two 

lifting speeds; individual selection of columns 

within the lift system and multi-functional 

display. 

• Precise synchronisation for continuous smooth 

movement without any abrupt speed variations. 

Careful load handling by soft start. 

• Short set-up time by adjustable wheel forks, 

quick cable connection, spring-loaded travelling 

device and high lifting speed. 

• 

Sensor load supervision with immediate stop if 

vehicle is lowered onto an obstacle (optional). 

Walter Finkbeiner GmbH 

Alte Poststrasse 9 - 11 

72250 Freudenstadt / Germany 

http://www.finkbeiner-lifts.com


▀ Unique ram design; 

protected within column 

▀ Ease of operation 

Continuous smooth synchronisation 

Two operation speeds 

Menu control and display 

▀ Adjustable forks also 

for super singles 

▀ Load supervision; stops if 

lowered onto an obstruction 

▀ Front and rear wheels spring-loaded 

for low floor pressure 

Technical data: 

Capacity: 

Wheel forks: 

Stroke: 

Speed: 

Drive: 

Connection: 

Control: 

Load locks: 

Operation: 

Cable connection: 

Travelling device: 

Protection class: 

Colour: 

7,5 t / 8,2 t per column 

Adjustable for wheels up to 22.5“ / Ø 1140 mm, 

length 385 mm also for super singles 

1725 mm 

Up: 1.5 m/min, Down: 1.7 m/min. 

Electro-hydraulic 

400V/3Ph/50Hz/32A 

Proportional valves for continuous smooth 

synchronisation 

Hydraulic and mechanical 

At any column: up / down / slow 

Modes: single / pair / group / all 

Menu control and display at master column 

Connecting cables in a circuit with one open 

side, cable pluggable on both ends 

On all columns 

IP 65 

Orange RAL2004 

© 2007 Walter Finkbeiner GmbH 

Patents pending 

Technical changements reserved 






Utilisation 

EHB 702 (4 x 2.5 t) 10 t capacity 

EHB 702 (4 x 2.5 t) 10 t capacity 

EHB 707 (4 x 7.2 t) 28.8 t capacity 





EHB 715 (4 x 15 t) 60 t capacity 






Advantages 

+ mobility - portable columns, easily to be 

moved by one person, use indoors or outdoors, 

no installation 

+ above floor - free access to vehicle, optimum 

adjustable working height, good visibility at bright light, 

modern and ergonomic working place 

+ simple use - for all types of vehicles, lifting 

at tyres without difficult adjustments 

+ multi-operation - lift can be used for several 

vehicles placed on support stands 

+ space saving - columns can be put aside, 

little space required 

+ versatile use - ideal for washing, service, 

maintenance, repair, use also in spray rooms 

+ space optimising - working place not 

blocked by stationary lifts or pits 

+ extendable - any quantity of columns, various 

accessories available as drive-on ramps etc. 






Advantages 

Strong lifting column, compact in stature and still light 

Strong and rigid – highly distortion-resistant and still light 

Modern design – elegant and slim columns; without a top-heavy motor 

Low base frame – suitable also for low-floor vehicles 

Large safety distance – between pillar and wheel stop 

Top quality – continuous high quality; welding by robot technology 

and high-grade powder coating 

Adjustable wheel forks also for super singles 

Adjustable forks – easily adjustable for wheel sizes up to 22.5“ / Ø 1140 mm; 

without the need for small wheel adaptors 

For super singles – long lifting forks of 385 mm 

Exchangeable load supports 

– Long 510 mm forks with 7.5 tonne capacity (optional) 

– Flat forks (optional) 

– Support brackets for railway vehicles (optional) 

Patents pending 

Rugged low-maintenance hydraulic drive 

Ideal for heavy loads – hydraulics with a direct acting cylinder qualifies as the most 

efficient drive to lift heavy loads 

Long service life – nearly maintenance-free by self-lubrication; without metal friction 

Waterproof – insensitive to water, dust, dirt 

Protected cylinder – integral to column, hydraulic cylinder encased in a steel tube 

Gravity lowering – energy saving and quiet 

Pic. Hydraulic cylinder protected within lift pillar 






Advantages 

Safe working underneath the lifted load 

Double load protection 

– Hydraulic: safety check valve, at any lifting height 

– Mechanical: automatic safety lock, opened only for lowering 

Portable column lift 

Easy to move – by one person 

Low floor pressure – large support area when front wheels retract into its frame 

Wheel jack at each column – adjustable in height; locking brake preventing 

unintentional movement of column 

Retractable spring loaded wheels – front and rear wheels self-retract under load; 

the column is automatically mobile when unloaded; no need for troublesome handling 

Small and mobile – narrow turning radius, convenient in restricted areas 

Pic. Spring loaded front wheels 

Pic. Spring loaded rear wheel 

Continuous and smooth movement 

Smooth synchronisation – continuous synchronisation when lifting and lowering by 

proportional valves without any abrupt speed variations 

Precise regulation – height tolerance between columns is a maximum of 2 mm, even 

with totally uneven loads 

Soft start – careful load handling by continuous increase of speed 

Load supervision, stops if lowered onto obstruction 

Safety stop – engages if vehicle is lowered onto an obstruction such as forgotten 

support stands or gear box lift underneath the vehicle. Prevents major accidents. 

(Optional) 

Load supervision – the lifted load is continuously monitored. The display shows the 

actual load on each column, or total load. (Optional) 






Advantages 

Ease of operation 

Operation from any column – Up / Down / Slow / Single / E-Stop / Lighting 

Two speeds – high speed lifting and lowering, slow speed for fine positioning 

Menu control – simple and quick selection of operational functions 

Individual selection of columns – any configuration such as pair or group 

Intermediate stop – automatic stop at any working height (optional) 

Height limit – adjustable maximum lifting height, e.g. where there is a height restriction 

(optional) 

Pic.. Master control panel 

Visualisation of safety on display 

– display of the active columns within the lift system 

– display of the active operational functions 

– display of the actual lifting height in “mm” or “inch” 

– display of error code, automatic failure diagnostics 

– display of the actual weight in “kg” or “lbs”, per column or total (optional) 

Pic. Slave control panel 

Versatile configuration up to 24 columns 

Only one power supply for set of 6 – 1 master, 5 slaves 

A-B-C-D-E-F-G-H-I-J-K-L 

A-B-C-D-E-F-G-H-I-J-K-L 

Pic. Display with 24 columns 

Lift extendable – up to 24 columns per set (4 masters, 20 slaves) 

Location of columns anywhere 

– slave columns all identical without encode, to place anywhere at the vehicle 

– several master columns can operate within one lift set 

Quick short-distance cable connection 

Short set-up time – short distances, interconnect cables from column to column 

around the vehicle in a circuit with one end open to drive-in/out 

Free working area – no troublesome cables underneath the vehicle preventing 

unnecessary trip hazards 

Plugs on both ends – interconnecting cables to be removed or exchanged easily 






Advantages 

Increase of working ergonomics 

Pic. Cable suspension 

Useful accessories to increase ergonomics and efficiency of the lift (optional): 

Master Control Panel at slave column – menu control and display at each column 

Lighting Kit – bright under-vehicle illumination of the working area 

Cable Suspension – automatic overhead lifting of interconnect cables for free access, 

preventing trip hazards 

Top level quality 

QS system 

Innovative - Finkbeiner with the most modern and leading technology 

Quality assurance – maximum requirements for suppliers, production and final 

acceptance 

Made in Germany 

Ready for operation 

Plug and Work – delivery with lift ready for immediate operation, incl. hydraulic oil 

Tested by manufacturer – the lift is fully tested and approved by the manufacturer 

Customer-friendly after-sales-service 

Customer satisfaction – Finkbeiners top goal 

Minimum service costs – thanks to low-maintenance design and highest quality 

standards 






Technical Specifications 

Model / Capacity: • EHB807V11-4: set of 4 (1 master / 3 slaves), capacity 4 x 7,5 t = 30 t 

• EHB807V11-6: set of 6 (1 master / 5 slaves), capacity 6 x 7,5 t = 45 t 

• EHB807V11-8: set of 8 (2 masters / 6 slaves), capacity 8 x 7,5 t = 60 t 

• Extendable up to 24 columns (4 masters / 20 slaves) 

• Several masters can work in one set. All slaves identical; to place anywhere at vehicle. 

Stroke: 

Speed: 

Movement: 

Load Support: 

Drive: 

Voltage: 

Motor: 

1725 mm, lifting height 1825 mm 

Up: 1.5 m/min., Down: 1.7 m/min 

• High speed lifting and lowering, slow speed for fine positioning 

• Precise and smooth synchronisation without abrupt speed variations 

• Soft start, careful load handling by continuous increase of speed 

• Adjustable wheel forks up to 22.5“ / Ø 1140 mm (no need for small wheel adaptors) 

• Long lifting forks of 385 mm, suitable for super singles 

• Load supports exchangeable 

Electro-hydraulic drive; direct acting cylinder; power unit at each column 

Operation voltage 400 V / 3 phase / 50 Hz / 32 A 

2.2 KW per column 

Dimensions: 1150 x 1130 x 2255 mm (l x w x h) 

Weight: 

Colour: 

Column Design: 

540 kg per column 

Orange RAL2004, carriage and panels grey RAL7015, powder coating 

• Flat base frame with front height of 105 mm for low-floor vehicles 

• Large safety distance of 225 mm between pillar and wheel stop 

• Low column without a top-heavy motor 

Operation: 

From any column: 

Modes: 

Special functions: 

Up / Down / Slow / Single / E-stop / Lighting 

Remote control handset at master (optional) 

All / Pair / Group – selection at master 

Master Control Panels at slaves to select from any column (optional) 

Intermediate Stop; automatic stop at any working height(optional) 

Height Limit; adjustable max. height (optional) 

Display: 

• Display of active columns within the system 

• Display of active operational functions 

• Display of actual lifting height in “mm” or “inch” 

• Display of error code; automatic failure diagnostics 

• Display of actual weight in “kg” or “lbs” (optional) 

• Operating hours meter 






Technical Specifications 

Cable Connection: • Interconnecting cables from column to column around the vehicle in a circuit 

with one open end to drive-in/out 

• Cables pluggable on both ends, length 10 m 

• Power cord at master, length 10 m 

Control System: 

Hydraulic Drive: 

Double Load 

Securing: 

Positioning 

Wheels: 

• Finkbeiner micro-processor with integrated operation panel and display 

• Menu control for selection of operational functions at master column 

• Self-configuration of columns within the system, no encodes needed 

• Admissible temperature range -5°C up to + 50°C 

• Control voltage 24V DC 

• Hydraulic power unit at each column 

• Power transmission by direct acting cylinder for maximum efficiency 

• Gravity lowering without motor; energy-saving and quiet 

• Simple emergency lowering e.g. power failure 

• All columns included hydraulic oil HLP32; Bio-Oil with lifetime lubrication (optional) 

• Hydraulic check valve to secure load at any position 

• Mechanical all position safety lock; always engaged and opened automatically for lowering 

• Wheel jack, spring-loaded, at each column 

• Retractable spring-loaded front wheels, large support plates for minimum floor pressure 

• Ground clearance at front 10 mm, at rear adjustable up to 25 mm 

• Locking brake to prevent unintentional movement of column 

• Hydraulic Wheel Jack for front and rear wheels, with large ground clearance (optional) 

Protection class: • IP 65 

• Power unit fully covered; hydraulic cylinder rod encased by steel tube 

Maintenance / 

Service Life: 

Safety Features: 

Safety Standards: 

• Low-maintenance and self-lubricating hydraulic system 

• Galvanised steel pipes are used instead of hydraulic hoses; no need to exchange 

• Continuous smooth synchronisation by proportional valve without abrupt speed variations 

• Precise regulation with a height tolerance between columns of max. 2 mm 

• Monitoring of all operational functions; stop in case of failure; display of failure code 

• Automatic stop if lift carriage lowers onto an obstruction 

• Audible warning and information signal 

• Hydraulic pressure relief valve preventing overload of column 

• Load supervision; stops if vehicle is lowered onto an obstruction; continuous monitoring; 

display of the actual loads (optional) 

• UVV-VBG14 and CE (EN 1493) approved 

• Made in Germany 






Accessory 

Support Stands 

to support vehicles at axle or frame for free access to wheels or to remove columns. 

Type Capacity Height Optional additional equipment: 

(mm) wheels (FR) Spindle (SV) 

Spring(FV) 

wheels (LR) 

(instead undercarriage FR) 

for fine 

adjustment 

for easily 

adjustment 

of height 

three spring-loaded wheels 

LB12 12 t 450-750 ▬ ▬ ▬ ▬ 

KB07 8.2 t 820-1330 • ▬ 

GB07 8.2 t 1320-1950 • 

GB15 15 t 1380-2010 ▬ • • • 

• standard, option, ▬ not available 






Accessory 

Cable Suspension Kit CAD 

to gain free access to the lifted vehicle, 

consisting of 2 cable guide rods with clamps and 2 cable hooks per column. 

Truck Crossbeam TRE15 

wheel-free lifting of vehicles at the frame, 

to be used together with two mobile columns, 

capacity 15 t, 3200 mm long. 

Trailer Support TA15 

to lift trailers at king pin, max. Ø 120mm, 

to mount onto crossbeam TRE15, 

capacity 15 t, total height 1100mm. 

Ramps FA25 

ascending device, 2 platforms to drive-on and 2 traverse beams, 

capacity total 25 t, dimension of platform 8900 x 700 x 238 mm (L x W x H). 






Accessory 

Wheel Carriage RW 

for easily mounting or dismounting of wheels, also for twin wheels. 

RW 7.06 

RW 5.16 

Capacity: 

Lifting Height: 

Wheel Diameter: 

Drive: 

700 kg 

660 mm 

500 - 1500 mm 

hydraulic pump 

Capacity: 

Lifting Height: 

Wheel Diameter: 

Drive: 

500 kg 

1600 mm 

350 - 1500 mm 

manual winch 

Platform Lift FI2 

for mounting/dismounting of aggregates, 

platform size 1500 x 800 mm, moveable 

capacity 2 t, height 850 - 1800 mm. 

. 

Gear Box Lift GTR2B 

for mounting/dismounting of gear boxes, 

capacity 2 t, height 785 -1900 mm, moveable. 

Accessory: 

Swivel Plate GP1B 

for gear box lift GTR2B 

dimension: 530 x 380 mm, 

Decline: adjustable +/- 12°, 

incl. rubber supports and 

belts.

Mobile Column Lift EHB Premium - Heka.pl

Create successful ePaper yourself

Delete template?

Save as template?