MITM - Vargus
MITM - Vargus
MITM - Vargus
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>MITM</strong><br />
Shell Mill (For Inserts 40)<br />
NEW!<br />
Shell Mill<br />
D1 Da<br />
D2 dH7 D1<br />
Da<br />
Adaptor not included<br />
Conical and Standard Shell Mills<br />
Standard<br />
Conical<br />
Insert Length<br />
1.575"<br />
(40mm)<br />
Ordering Code<br />
RTMC D190-075-40L7<br />
RTMC D230-100-40L9<br />
RTMNC D190-075-40L7<br />
EDP No.<br />
80623<br />
80624<br />
80625<br />
* Use the included Vardex Torx+ screwdriver only<br />
Dimensions (inch)<br />
D1<br />
1.772<br />
2.165<br />
1.772<br />
D2<br />
1.929<br />
2.323<br />
1.929<br />
dH7<br />
.75<br />
1.00<br />
.75<br />
H<br />
1.97<br />
2.00<br />
1.97<br />
No. of<br />
Flutes<br />
Z<br />
7<br />
9<br />
7<br />
Spare Parts (Ordering Code & EDP No.)<br />
*<br />
Location<br />
Screw<br />
Clamping<br />
Screw x2<br />
Torx+ Screwdriver<br />
SLD4IP8A SCD4IP8 KIP8<br />
(M4 x 0.7) (M4 x 0.7)<br />
(80533) (80622) (70231)<br />
Holder Screw<br />
3/8"-24x1.25 (70223)<br />
1/2"-20x1.5 (70224)<br />
3/8"-24x1.25 (70223)<br />
Standard Thread Application per Toolholder<br />
Toolholder<br />
Min. Thread Ø<br />
Standard<br />
RTMC D190-075-40L7<br />
RTMC D230-100-40L9<br />
D2 (inch)<br />
1.929<br />
2.323<br />
min ISO<br />
(fine)<br />
M52x1; M55x1.5; M55x2; M55x3<br />
M64x1; M64x1.5; M64x2; M65x3<br />
UN/UNS BSW BSP(G)<br />
2 1 /8 -8UN; 2 1 /8 -12UN; 2 1 /16-16UN; 2 1 /8 - 20UN;<br />
2¼ -10UNS; 2¼ -14UNS; 2¼ -18UNS<br />
2 ¼ -12; 2 ¼ -16 1 ¾ - 11<br />
2½ -8UN; 2½ -10UNS; 2½ -12UN; 2½ -14UNS;<br />
2½ -16UN; 2½ -18UNS; 2½ -20UN<br />
2 ½ -12; 2 ½ -16 2 ¼ -11<br />
Conical Thread Applications by Toolholder<br />
Toolholder<br />
Thread Ø<br />
D2 (inch)<br />
NPT NPTF BSPT<br />
Conical<br />
RTMNC D190-075-40L7<br />
1.929<br />
2½ - 8 (and up)<br />
2½ - 8; 3-8<br />
2 ½ -6 x11<br />
2 Step Clamping System!<br />
1<br />
Location<br />
Screw<br />
Clamping<br />
Screw x2<br />
2<br />
Side with identification marks<br />
Side without identification marks<br />
Always mount all inserts on the<br />
same side!<br />
<strong>MITM</strong> 11
Change language