PM-7 Operating Manua.. - Voss Associates
PM-7 Operating Manua.. - Voss Associates
PM-7 Operating Manua.. - Voss Associates
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 5 PC-Based<br />
Calibration/Configuration Program<br />
Windows-Based<br />
Software If your system operates on the Windows® -based <strong>PM</strong>-7 Manager 1.0<br />
software, please refer to the manual MA-<strong>PM</strong>-7Manager. This chapter is a<br />
guide for users with systems operating with the MS-DOS/PC-DOS<br />
software.<br />
MS-DOS or PC-DOS<br />
General Description<br />
Overview<br />
The <strong>PM</strong>-7 is supplied with a software package, provided by Thermo Fisher<br />
Scientific, to facilitate calibration and configuration of the portal monitor.<br />
The software runs under the MS-DOS or PC-DOS operating system on<br />
most IBM-PC/XT/AT or compatible computers with the following<br />
minimum system requirements:<br />
• 512K bytes of random access memory<br />
• RS-232 serial interface<br />
• Parallel interface<br />
• One diskette drive,<br />
• Parallel printer<br />
• Monochrome or color monitor<br />
Several routines can be executed with the program running on the computer<br />
with no connection to a portal monitor. These include:<br />
a. Editing of operating parameters for up to 15 different <strong>PM</strong>-7 portal<br />
monitors.<br />
b. Editing of system parameters.<br />
c. Printing of calibration reports for up to 15 different <strong>PM</strong>-7 portal<br />
monitors.<br />
Thermo Fisher Scientific Personnel Monitor -7 Techical Guide_ 5-1