08.06.2015 Views

PCM-2 Manual.pdf - Voss Associates

PCM-2 Manual.pdf - Voss Associates

PCM-2 Manual.pdf - Voss Associates

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Alpha & Beta<br />

Sum Zone Alarm<br />

Alpha & Beta<br />

Sum Channel Alarm<br />

A sum zone is a user defined group of two to four detectors which are grouped<br />

together to enhance the monitor's ability to detect contamination spread over an<br />

area shared by several adjacent detectors. The alpha or beta sum zone alarm<br />

setpoint defines the activity required within the sum zone area before a sum zone<br />

alarm is triggered. Refer to the upcoming section or sum zone setup for more<br />

information on sum zones.<br />

A sum channel is a sum zone consisting of every channel in the monitor. The<br />

alpha or beta sum channel alarm setpoint is the activity which must be present<br />

within the entire monitor before the sum channel alarm is triggered.<br />

Whenever the above parameters are changed, the following dependent values are<br />

recalculated and displayed:<br />

Count Time<br />

False Alarm Rate<br />

The measurement count time required at present background rates. This is the<br />

longest count time calculated for any detector channel.<br />

This is the percentage of users who will see false alarms given the current set of<br />

parameters.<br />

Detector Parameters<br />

Detector parameters are normally set via the Override Parameters<br />

screen. Values entered from this screen will be written to all<br />

detectors; any entries made previously to a single detector will be lost.<br />

Parameters for a single channel may be examined or adjusted through<br />

the Detector Parameters screen by using the arrow keys to select the<br />

desired detector. Detailed explanations of these parameters and their<br />

uses are provided elsewhere in this manual.<br />

Detector #0 Parameters - Min Count Time Mode<br />

HIGH VOLTAGE (VOLTS):<br />

GEOMETRY FACTOR:<br />

1600<br />

1.00<br />

io=Alpha Channel<br />

ACTIVE:<br />

THRESHOLD (% MAX):<br />

EFFICIENCY (%):<br />

RDA (DPS):<br />

HI FAIl. (CPS):<br />

LO FAIL (CPS):<br />

WEIGHT FACTOR:<br />

Calculated Values<br />

BACKGROUND (CPS):<br />

ALARM LEVEL (NCPS):<br />

COUNT TIME (SEC):<br />

Yes<br />

45<br />

22.0<br />

16.7<br />

100000<br />

0.00<br />

50.0<br />

0.00<br />

1.00<br />

1. 00<br />

Beta Channel~~c~~~~~~=91<br />

ACTIVE:<br />

Yes<br />

THRESHOLD (% MAX): 5<br />

EFFICIENCY (%): 22.0<br />

RDA (DPS): 83.3<br />

HI FAIL (CPS): 100000<br />

LO FAIL (CPS): 0.00<br />

WEIGHT FACTOR: 10.0<br />

SHIELD FACTOR: 1.00<br />

calculated Values<br />

BACKGROUND (CPS): 0.00<br />

ALARM LEVEL (NCPS): 1.00<br />

COUNT TIME (SEC): 1.00<br />

<strong>PCM</strong>2.MANI REV AI April 1995 ~-11

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!