08.06.2015 Views

PCM-2 Manual.pdf - Voss Associates

PCM-2 Manual.pdf - Voss Associates

PCM-2 Manual.pdf - Voss Associates

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Mylar/Poly Film Dispenser Option (<strong>PCM</strong>2 OPT8)<br />

Myiar/Poly Film<br />

Dispenser Option<br />

Parts List<br />

This option incorporates a thin mylar or polypropylene film supply and take-up<br />

roll system into the <strong>PCM</strong>-2's base to provide the user with a simple and easily<br />

accessable method of protecting the unit's foot detector from the frequent<br />

contamination caused by users shoes. The system has been designed to manually<br />

advance the thin film sheet over the foot detector and onto a blank take-up roll<br />

where the contaminated particles are trapped between film layers, to later be<br />

discarded along with the used protective film sheet. The remaining blank supply<br />

roll core is then used as the take-up roll when a new supply roll is installed. The<br />

film is manually advanced by inserting a hexagonal shaft driver into the take-up<br />

roll shaft center hex screw, thru a small hole in the front of the <strong>PCM</strong>-2's base,<br />

and rotating the take-up roll 2 to 3 complete clockwise turns. A storage clip for<br />

the hex driver is located inside the <strong>PCM</strong>-2's side door.<br />

As noted, two choices of protective film media are available with this option. The<br />

polypropylene material is 0.0005 in. thick. The mylar material is 0.00016 in.<br />

thick and is, therefore, better suited for alpha radiation monitoring. Both<br />

materials are furnished on cardboard cores in 200 ft. lengths<br />

This option offers the user a greater degree of foot detector maintenance than do<br />

the standard cardboard-framed 0.0005 thick film protectors in that contaminated<br />

particulates released from users shoes are contained in the take-up roll when a<br />

fresh width of film is drawn over the detector. The thinner mylar material<br />

available with this option also decreases the impact to the overall sensitivity of the<br />

foot detector.<br />

Reference 11534-D320; Mylar/Poly Film Dispenser Assembly, OPT 8<br />

Item<br />

Ref #<br />

Part Name Description Manufacturer and Part<br />

Number<br />

Eberline Part<br />

Number<br />

010 Roll Core Film<br />

Dispenser<br />

020 Chassis Film<br />

Dispenser<br />

030 Pan Film<br />

Dispenser<br />

Eberline Instruments<br />

Eberline Instruments<br />

Eberline Instruments<br />

ZPl1534301<br />

ZPl1534299<br />

ZP11534300<br />

050 Clear Poly Film<br />

Roll<br />

.0005 Thk. x<br />

200 Ft.<br />

Edelman Ind.<br />

(by description)<br />

MMMIl32<br />

17-66 <strong>PCM</strong>2,MAN/ Rev A/April 1995

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!