PCM-2 Manual.pdf - Voss Associates

XICO Insert Card Reader Option (PCM2 OPT7C)
XICO Insert Card
Reader Option
Parts List
The magnetic stripe card reader provides a fast and accurate alternative to
keyboard entry of user ID number. The magnetic stripe reader is a "push-pull"
type which requires the user to insert a magnetic card into the card guide. The
magnetic card reader is mounted in the lower cutout of the consloe panel's display
panel beneath the CRT.
The recommended encoding for magnetic cards used in this reader is ANSI/ISO
BCD with the data track located at ANSI Track #2 and the timing track at ANSI
Track #3. The recommended density is 105 bits per inch (BPI). This will allow
up to 39 data characters (PCM-2 allows 9 characters in the user ID and RWP#
fields).
The center of magnetic strip should be located 7/16" (0.44") from the edge of the
card. The recommended width of the magnetic card is 7/16" (0.44").
Reference 11534-D325; XICO Card Reader Assembly, OPT 7C
Item
Ref #
Part Name Description Manufacturer and Part
Number
Eberline Part
Number
010 Mounting Plate XICO Card
Reader
020 Cable Assembly XICO Card
Reader
030 XICO Card Reader Magnetic,
Bar Code
Eberline Instruments
Eberline Instruments
XICO n02ESAC
ZP1l534141
YPl1534514
VEMI69
17-56 PCM2.MAN/ Rev A/April 1995