PCM-2 Manual.pdf - Voss Associates

Swiveling Casters Option (PCM2 OPT6)
This option for the PCM-2 consists of two fixed and two swiveling casters which
mount in the rear and front corners of the unit's base to provide the user with an
easily movable instrument platform. Two independently actuated rubberized
machine levelers are also mounted in the unit's base, adjacent to the swiveling
casters. These spring-loaded levelers are manually actuated, through holes located
in the sides of the base, into a down position with an actuation lever to stabilize
the instrument in a fixed location of operation. Actuating the levelers up enables
the user to wheel the unit away from a wall, gas bottle enclosure, or another
adjacent instrument for access to its rear or side doors and/or for decontamination
of the unit. The actuation lever stores on a mounting clip in the side door of the
instrument.
Note: This option has been designed to support users with mobility of their PCM­
2(s) over hard, level and smooth surfaces only. Due to the low clearance design
of the leveler mechanisms, usage of the casters for moving the unit over irregular,
soft and/or inclined surfaces is not recommened. Damage to the caster leveler
mechanisms and the PCM-2 unit itself can occur if movement of the equipped unit
is not limited to these types of surfaces.
Swiveling Casters
Option Parts List
Reference 11534-D340; Swiveling Casters Assembly, OPT 6
Item
Ref #
Part Name
Description
Manufacturer and Part
Number
Eberline Part
Number
010 Swiveling Caster
Bracket
Right Front
Eberline Instruments
ZPl1534279
012 Swiveling Caster
Bracket
Left Front
Eberline Instruments
ZPl1534368
020 Fixed Caster
Bracket
Rear
Eberline Instruments
ZPl1534280
030 Glide Tube Leveler Eberline Instruments ZPl1534276
Actuator
040 Modified Glide
Handle
Leveler
Actuator
Eberline Instruments
ZPl1534278
050 Glide Cam Shaft Leveler
Actuator
Eberline Instruments
ZPl1534275
17-46 PCM2.MAN/ Rrw A/Arril 1gg5