PCM-2 Manual.pdf - Voss Associates

Optional Features
Option 58
As previously nored, the PCM-2 access control unit can be supplemented with
three optional features:
Remote Alarm Annunciator
This option consists of a small remote module which visually displays a red light
and emits an audible tone to communicate alarms for either an unauthorized exit
from or an emergency exit gate lock override condition at an access control
equipped PCM-2 unit. The remote alarm module features a push-button "Alarm
Acknowledge" switch to manually interrupt the audible alarm tone and visual
alarm light. The typical application for this remote alarm annunciator module is
for installation in a guard station where remote monitoring of personnel egress
from a single PCM-2 or from multiple PCM-2s is desirable. This option includes
the interconnecting cable CA-109-XXFT (XX denotes cable length in feet) The
length of this cable, up to a 200 ft. maximum, must be specified by the user when
ordering this option. The remote alarm module(s) can simply set upright on any
horizontal surface or up to four modules can be wall mounted with the use of an
optional wall mounting fixture (Reference PCM2 OPT14, Remote Annunciator
Wall Mount).
Option 5C
Local Alarm Beacon
This accessory is simply a red strobe light which illuminates when the access
control unit is in an emergency gate lock override status. The alarm beacon is
mounted atop the access control unit on the upper cover panel providing
maximum visibility to Health Safety personnel which may be monitoring the
system nearby. This option is recommended for customers who intend to operate
multiple PCM-2s with access control adjacent to one another in the same area so
as to provide the capability of instant visual identification of a single alarmed unit.
This option can be easily retrofitted to any access control unit in the field.
Option 5D
Remote Pull Station
Marked with the familiar "Pull In Case Of Fire" lettering and equipped with a
keylock reset, this remote switch is intended for installation in a guard station
where remote override of one or multiple exit gate locks is necessary in the event
of fire or other emergency situations which require immediate personnel egress.
This option includes only the pull station switch itself which can be interwired
with any number of PCM-2s. Since each customer facility will likely have their
own unique interwiring requirements for this remote switch, no interconnecting
cable is provided with the option. Eberline Customer Service and Engineering
Groups are available to provide design recommendations/services for installation
and interwiring of this safety related option.
PCM2.MANi REV Ai April 1995 17-33