You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Largest Inventory Anywhere<br />
We've Expanded (Again) Into A<br />
New 2-Acre Facility To Better Serve You!<br />
The first home of the <strong>Original</strong> <strong>Parts</strong> <strong>Group</strong> was located in Anaheim, California<br />
and was approximately 1200 square feet. That was over 19 years ago and since<br />
then we have moved six times, always going to larger and larger facilities to<br />
expand our product line and improve our customer service. Our newest facility<br />
is located on over 2 acres (90,000 square feet), making it the largest operation<br />
in the United States devoted exclusively to GM A-body parts and accessories.<br />
There is over 50,000 square feet under roof, with a further 4,000 square feet<br />
under construction. We are located on Bolsa Ave., a main thoroughfare in<br />
Huntington Beach, California, directly across the street from the southern<br />
California headquarters facility of the Boeing Corporation. With the operational<br />
capabilities we have in this enormous new building, we are able to pull, pack,<br />
and fill orders for shipping with unparalleled accuracy and speed. We would like<br />
to thank you, our loyal customers, for this explosive growth and support through<br />
the years. Be assured that we will continue to uphold <strong>Original</strong> <strong>Parts</strong> <strong>Group</strong>'s<br />
company mission: To offer the finest reproduction and aftermarket parts and<br />
accessories for GM A-bodies at the very best prices anywhere. So, we would<br />
like to say…. Thank you very much for shopping at <strong>Original</strong> <strong>Parts</strong> <strong>Group</strong>.<br />
<strong>BUY</strong> <strong>DIRECT</strong>!<br />
We manufacture our own<br />
Injection molded plastic/interior trim<br />
Die Cast Moldings and Chrome Trim<br />
Roll Formed Steel and Aluminum <strong>Parts</strong><br />
Die Cut Gaskets and Molded Rubber<br />
Abbreviations Used<br />
In This Catalog<br />
AT/AUTO = Automatic transmission<br />
BCKT = Bucket seat<br />
BB = Big-block engine<br />
CI = Cubic inches<br />
CPE = Coupe or hardtop without pillar posts<br />
CONV = Convertible<br />
CYL = Cylinder (6 or 8)<br />
DR = Door (as in 2- or 4-doors)<br />
HP = High-performance<br />
OM = <strong>Original</strong> Equipment Manufacturer<br />
(usually General Motors)<br />
PG = Powerglide<br />
PS = Power steering<br />
REPRO = Aftermarket reproduction designed<br />
to original GM part specification<br />
RR = Rear<br />
SB = Small-block engine<br />
STD = Standard ( non-SS or non-high performance)<br />
TH = Turbo Hydramatic shift transmissions<br />
4-SPD = 4-speed transmission<br />
Left (or LH) = Driver side of vehicle<br />
Right (or RH) = Passenger side of vehicle<br />
Order By Phone<br />
CALL TOLL FREE<br />
Call Toll Free to place your order at OPG.<br />
Simply call 1-800-243-8355. For local or<br />
international orders, please call (714) 230-6000.<br />
Order By FAX<br />
FAX 24 HOURS A DAY<br />
You can FAX your order to us 24 hours a day,<br />
7 days a week and always get the fast service<br />
you’ve come to expect at (714) 230-6050.<br />
Order By Mail<br />
Simply fill in the order form(s) in the back of this<br />
catalog: enclose your payment of money order,<br />
certified check, cashier’s check or credit card,<br />
and place it in the mail. We also accept personal<br />
checks, but the order must be held for 20 days<br />
pending check clearance. Minimum mail order<br />
purchase is $20.00.<br />
Minimum Order<br />
When ordering by mail and paying by check, we<br />
require a $20 minimum order. Credit card orders<br />
also require a minimum of $20. If you're purchasing<br />
parts in person at OPG, no minimum is required.<br />
SHOWROOM HOURS:<br />
Monday through Friday 8:00AM to 5:00PM<br />
Saturday 10:00AM to 3:00PM<br />
We're closed on Sunday and Major U.S. Holidays
Quality Reproductions<br />
At <strong>Original</strong> <strong>Parts</strong> <strong>Group</strong>, we pride ourselves on offering only the highest<br />
quality restoration parts and accessories. Our full-time research department<br />
ensures that all of our parts meet or exceed original factory specifications<br />
for quality and durability. Our company philosophy enables us to offer a<br />
"100% SATISFACTION GUARANTEE" policy on all parts.<br />
Telephone Sales &<br />
Customer Service Hours<br />
Order desk hours are (Pacific Daylight Time) 7:30AM to 5:00PM Monday<br />
through Friday, and on Saturday from 10:00AM to 3:00PM. Our showroom<br />
opens daily at 8:00AM and on Saturday at 10:00AM.<br />
We’re closed on Sunday and major U.S. Holidays. FAX 24 HOURS A DAY<br />
You can FAX your order to us 24 hours a day, 7 days a week and always get the<br />
fast service you’ve come to expect at (714) 230-6050<br />
Methods Of Payment<br />
All major credit cards, money orders, and cashier’s checks are accepted.<br />
We also accept any first party, preprinted personal checks. U.S Funds only,<br />
please. C.O.D. (Cash On Delivery) orders are also accepted to anywhere<br />
in the continental U.S.<br />
Customer Service Representatives<br />
<strong>Original</strong> <strong>Parts</strong> <strong>Group</strong>’s customer service representatives are available to<br />
answer all your restoration questions and to take orders for merchandise<br />
six days a week. Please have your customer number ready (on your catalog<br />
above your name) when you call in. Find out how many frequent buyer points<br />
you have, what they’re worth, and if you have any credit to use. You can<br />
easily check on whether your parts and accessories were shipped, the date<br />
they were shipped, and an estimate of the date of delivery to your door.<br />
Shop<br />
online 24/7 at ...<br />
GMRESTOPARTS.COM<br />
Our website<br />
makes it easy!<br />
Call Toll Free:<br />
1-800-243-8355<br />
Includes Alaska, Hawaii and Puerto Rico<br />
Our phone sales representatives are available to answer your<br />
questions regarding restoration and to take orders for merchandise<br />
six days a week. We accept VISA, MASTERCARD, AMERICAN<br />
EXPRESS, and DISCOVER. You may also arrange to have orders<br />
shipped C.O.D. (See “CASH ON DELIVERY” on the Ordering and<br />
Shipping page for details.) International Customers Please Dial<br />
(714) 230-6000.<br />
FAX Number:<br />
1-714-230-6050<br />
<strong>Original</strong> <strong>Parts</strong> <strong>Group</strong> offers a convenient FAX line for customers<br />
who have access to a FAX machine. Our FAX machine is available<br />
24 hours a day, 7 days a week.<br />
By Mail<br />
5252 Bolsa Avenue, Huntington Beach, CA 92649<br />
Simply fill in the order form(s) provided in the back of this catalog.<br />
Money orders, certified checks and charge cards are accepted.<br />
We recommend that you FAX your order blanks for faster service<br />
when using a credit card, however all mail orders are processed<br />
the same day that they are received.<br />
Order Through<br />
The Internet<br />
Http://www.gmrestoparts.com<br />
or www.originalpartsgroup.com<br />
Check out our world wide web site and virtual catalog.<br />
Order parts and accessories 24 hours a day on our secure<br />
server that utilizes the latest encryption technology.<br />
*See our Ordering and Shipping Information page in the back of this catalog for<br />
shipping information, merchandise return policy, and important additional<br />
<strong>Original</strong> <strong>Parts</strong> <strong>Group</strong> policies.
VOLUME<br />
DISCOUNTS!<br />
VOLUME<br />
DISCOUNTS!<br />
ARE YOU PLANNING A<br />
MAJOR RESTORATION?<br />
We have the largest selection and the best prices...<br />
Why not go one step further and save an additional<br />
5 or 10% on selected items? You can get it all here<br />
and take advantage of the best service and selection<br />
available anywhere!<br />
If your order is over $1000.00 and you pre-pay<br />
with a MONEY ORDER or CASHIER’S CHECK,<br />
you will receive a 10% DISCOUNT PLUS FREE<br />
FREIGHT. Order must exceed $1000.00 after<br />
discount is applied.<br />
If your order is over $1000.00 and you pre-pay<br />
with a CREDIT CARD you will receive a 5%<br />
DISCOUNT PLUS FREE FREIGHT. Order must<br />
exceed $1000.00 after discount is applied.<br />
If your order is over $500.00 and you pre-pay<br />
with a MONEY ORDER or CASHIER’S Check,<br />
you will receive a 5% DISCOUNT. Order must<br />
exceed $500.00 after discount is applied.<br />
IMPORTANT DISCOUNT QUALIFICATIONS:<br />
To qualify for discount you must absolutely order all<br />
parts at one time (no exceptions). Sorry, personal<br />
checks do not qualify for discount (certified funds only).<br />
C.O.D. orders are not eligible for discounts either.<br />
Special Note:<br />
Volume Discount pricing cannot be used in conjunction<br />
with any other special promotions, sales, or discounts!<br />
TRUCK FREIGHT AND OVERSIZED FedEx GROUND<br />
ITEMS NOT FREIGHT FREE.<br />
General Information<br />
Credit Cards<br />
You may place your order using VISA, MASTERCARD,<br />
AMERICAN EXPRESS, or DISCOVER. When placing<br />
your credit card order, be sure to include your name as<br />
it appears on the card, the entire card number, the<br />
date of expiration, and the security code located on the<br />
back of VISA, MasterCard, Discover and the front of<br />
American Express. IMPORTANT: We must be able to<br />
verify the shipping address as the credit card holder’s.<br />
Minimum credit card purchase is $20.00.<br />
Money Orders & Cashier’s Check<br />
Money orders, cashier’s check and certified checks are<br />
accepted. On pre-paid mail orders, this is the fastest<br />
method of insuring that your order is processed as<br />
quickly as possible, usually within 24 hours.<br />
Personal Checks<br />
To use a personal check or business check on pre-paid<br />
orders, the name, address, and check number must be<br />
pre-printed on the check. Only first party checks will be<br />
accepted. All orders paid by personal check are held 20<br />
business days pending check clearance. If you are<br />
mailing your order and need the parts in a hurry, we<br />
recommend sending a money order, cashier’s check,<br />
or paying by any of the major credit cards that we accept.<br />
Prices<br />
The prices in this catalog were in effect at the time of printing, and<br />
supersede all prices in any previous OPG publication. OPG reserves<br />
the right to change prices without notice. Availability of all parts and<br />
accessories in this catalog subject to change without notice. OPG<br />
reserves the right to discontinue products, services, and accessories<br />
without notice.<br />
Back Orders<br />
Many items in our giant inventory move quickly, and rarely are we out<br />
of stock on any items for any length of time. Over 90% of all items that<br />
are out of stock at the time you place your original order are in within<br />
5 days. We maintain a sophisticated back order tracking system in our<br />
computer that automatically ships any items due to you when they become<br />
available. Normally, back orders take as little as 5 days to receive, but can<br />
take as much as 30 days. For an estimated time of arrival, call our<br />
customer service department at 1-800-243-8355.<br />
Sales Tax Information<br />
Orders outside California are exempt from California State Sales Tax at<br />
the time of this printing. California residents are required to add sales tax.<br />
Due to the periodic unforeseen changes in the California Sales Tax and<br />
Federal Interstate Tax System, rates are subject to change. The current<br />
California State Sales Tax at the time of this printing is 7-3/4 %.<br />
*See our Ordering and Shipping Information page in the back of this catalog for shipping information, merchandise return policy, and important additional <strong>Original</strong> <strong>Parts</strong> <strong>Group</strong> policies.
Icon References<br />
Reproductions Manufactured in-house<br />
by <strong>Original</strong> <strong>Parts</strong> <strong>Group</strong>.<br />
Your satisfaction 100% Guaranteed!<br />
We have added hundreds of new products for 2003.<br />
From interior products to quality steel reproductions and<br />
everything in between! Throughout the catalog there is<br />
something new for everyone!<br />
There are hundreds of products throughout<br />
this catalog that are either special purchases from the<br />
manufacturer, overstocked in our warehouse, or loss<br />
leaders. Whatever the reason, our sale merchandise is<br />
still the best you can get at rock bottom pricing!<br />
Our made in the USA icon speaks for itself...<br />
American-manufactured products, of course!<br />
In this catalog, the GM Restoration <strong>Parts</strong> Emblem<br />
indicates that a product is officially licensed to<br />
<strong>Original</strong> <strong>Parts</strong> <strong>Group</strong> by General Motors.<br />
All merchandise in this catalog having a trademark or related logo of General<br />
Motors is licensed as necessary pursuant to copyright and trademark laws<br />
under agreements between <strong>Original</strong> <strong>Parts</strong> <strong>Group</strong>’s supplier and General Motors.<br />
Guide, Chevelle, El Camino and the GM RESTORATION PARTS emblems<br />
are trademarks of General Motors Corporation and are used under license to<br />
<strong>Original</strong> parts <strong>Group</strong> Incorporated.<br />
Come In And Visit<br />
Our Brand New<br />
SHOWROOM<br />
Table Of Contents<br />
Interior and soft trim................. 4-71<br />
Weatherstripping.................... 72-76<br />
Emblems and nameplates........ 77-78<br />
Body moldings and trim.......... 79-82<br />
Lamp, lenses and accessories<br />
............................................... 83-85<br />
Door handles, hinges, and<br />
accessories............................... 87-90<br />
Hoods and accessories............ 91-93<br />
Steel and fiberglass body<br />
parts......................................... 94-103<br />
Bumper pads and jacks................. 104<br />
Engine and body decals...... 105-108<br />
Suspension and Components<br />
...........................................<br />
Steering and brakes...........<br />
Fuel and carburetor............<br />
Transmission and clutch...........<br />
Batteries and accessories....<br />
Ignition, wiring, and electrical<br />
........................................... 187-203<br />
Nitrous systems and components<br />
........................................... 204-211<br />
Engine, components, and<br />
accessories........................ 212-291<br />
Cooling and air conditioning<br />
...........................................<br />
Exhaust components.........<br />
Washer/wipers...................<br />
Wheels and tires................<br />
Tools and welding supplies<br />
...........................................<br />
Bolts, clips, and fasteners.....<br />
Keys, lock sets....................<br />
109-125<br />
126-137<br />
138-168<br />
169-182<br />
183-186<br />
292-302<br />
303-312<br />
313-314<br />
315-325<br />
326-345<br />
346-349<br />
350-351<br />
Car covers and masks............... 352<br />
Wash/wax supplies............. 353-358<br />
Paint and rust treatment..... 359-367<br />
License plates, gifts, apparel<br />
........................................... 368-402<br />
Videos and literature........... 403-422<br />
Order Blanks & Shipping Policy in Back of Catalog
Steering <strong>Parts</strong><br />
Monte Carlo Power Steering<br />
Pump & Reservoir<br />
High-Pressure Power Steering Hoses<br />
$29.95<br />
PSH1006 70-71 70 all/71 small-block................................................... each 29.95<br />
PSH1008 71 Big-block.................................................................... each 29.95<br />
PSH1009 72 Small-block................................................................ each 29.95<br />
PSH1010 72 Big-block.................................................................... each 29.95<br />
Power Steering Coupler<br />
$119.95<br />
TRI6165 70 8-cyl............................................ each 119.95<br />
Steering Column Bowl<br />
$64.95<br />
Made in the USA and comes as a complete unit ready to install. This kit includes both<br />
pieces of the coupler, the rag joint to go between them and all necessary hardware.<br />
KR20110 70-72 ................................................................. each 69.95 64.95<br />
Emergency Flasher Knob<br />
$64.95<br />
<strong>Original</strong> GM replacement control lock tube bowl, only for vehicles<br />
without tilt steering.<br />
PP00106 70-77 All models................................. each 64.95<br />
Lucas Power Steering<br />
Stop-Leak<br />
1970-72 Power<br />
Steering Adjuster<br />
Bracket<br />
Small-blocks<br />
$9.95<br />
Beautifully chromed and an exact duplicate of the original.<br />
CTL1002 70-72 .............................................................................. each 9.95<br />
Big-Block Power<br />
Steering Pump-To-<br />
Bracket Spacer<br />
$8.95<br />
This Lucas Power Steering Stop-Leak and lube is<br />
totally effective at removing hard spots and tightness<br />
in worn steering boxes. To correct this problem, empty<br />
the reservoir and fill it with Lucas PSSL. Results are<br />
immediate and long lasting. To stop leaks, when<br />
power steering reservoir is low refill it with Lucas<br />
PSSL until leak stops (1 or 2 - 12 oz. bottles).<br />
CH25497 12-oz.................................. each 8.95<br />
$39.95<br />
C210018 70-72 Small-block. each 39.95<br />
$4.95<br />
Factory spacer used to properly mount the power<br />
steering pump to the front support bracket for<br />
correct alignment. Fits 1970-72 all big-blocks and<br />
1973-75 454’s.<br />
C210178 70-72 all BB, 73-75.... each 4.95<br />
126
Brake <strong>Parts</strong><br />
1970-72 Power Disc Brake Conversion Kits<br />
- Includes line modification kit<br />
- Complete instructions<br />
- Professionally manufactured<br />
for OPG<br />
STARTING AT<br />
$849.95<br />
This is the best way to convert your drum brake or early 4-piston caliper vehicle to later style, easier-to-find, single-piston style calipers and vented rotors.<br />
Each kit includes everything you need to completely convert your existing brakes to power discs. The entire spindle assembly is delivered to you setup,<br />
bearings packed and ready to be torqued to specs. Also included will be a line modification kit and instructions to guide the installation. Kits with 2" drop spindles<br />
are also available. Deluxe kits feature cross-drilled rotors and braided stainless steel front hoses.<br />
Each kit includes the following: New rotors, spindles, backing plates, re-manufactured calipers, caliper brackets, OEM-quality pads,<br />
OEM-quality pads, dual reservoir master cylinder, cadmium plated booster, proportioning valve, bearings/seals, brake hoses/necessary lines,<br />
hardware, detailed instructions, line modification kit<br />
M1790DX 70-72 stock kit.......................................................................................................................................................................................... KIT 849.95<br />
CH20417 70-72 w/2" drop spindles.......................................................................................................................................................................... KIT 969.95<br />
CH21234 70-72 deluxe kit........................................................................................................................................................................................ KIT 949.95<br />
NOTE: This product is DOUBLE OVERSIZED and requires an additional freight charge of $25.90<br />
Front Disc Brake Kits<br />
1970-72 Rear Disc Brake<br />
Conversion Kits<br />
$549.95<br />
Is it finally time to start hauling down that musclecar without a lot of fuss?<br />
OPG is proud to offer this easy-to-assemble front disc brake kit, that’s also<br />
STARTING AT<br />
easy on your wallet. The disc brake conversion is probably one of the best<br />
modifications you can make to your Monte Carlo. You’ll experience vastly<br />
improved braking, longer component life span, and a lot less effort required<br />
$719.95<br />
when you step on the brake pedal. Our stock spindle kit is ideal for those who<br />
wish to retain their car’s stock original ride height. This kit will work with your Calipers have built-in E-brake. Will work with C-clip eliminators.<br />
factory ball joints and tie rod ends, therefore minimizing the modifications<br />
Some modifications may be necessary.<br />
needed for installation. This kit will work well with most 14" and 15" wheels. Standard Kit Includes:<br />
Our dropspindle kit will lower your car 2" from it’s factory original ride height. Rotors, loaded calipers, brackets, axle lines, e-brake cables, hardware,<br />
This isdone without affecting the car’s suspension geometry or travel; perfect and 4-wheel disc prop valve.<br />
for that great lowered look!<br />
Deluxe Kit Includes:<br />
Stock kit includes:<br />
All features of the standard kit and cross-drilled rotors, braided<br />
Spindles, rotors, calipers, caliper brackets, dust shields, bearings, seals,<br />
stainless steel hoses, axle lines and rear E-brake cables.<br />
dust caps, spindle nuts, and brake hoses. NOTE: On certain vehicles,<br />
steering arms may need to be drilled out from 7/16" to 1/2" in diameter. Slotted Kit Includes:<br />
Drop kit includes:<br />
All features of the standard kit and gas-slotted, cross-drilled rotors,<br />
2" drop spindles, rotors, calipers, bearings, seals, dust caps,<br />
braided stainless steel hoses, axle lines and rear E-brake cables.<br />
spindle nuts, and brake hoses.<br />
C210232 70-72 deluxe........................................................ KIT 849.95<br />
CH24820 70-72 drop spindles.............................................. KIT 549.95 CH25025 70-72 slotted........................................................ KIT 849.95<br />
CH24821 70-72 stock spindles............................................. KIT 549.95 CH25835 70-72 standard..................................................... KIT 719.95<br />
NOTE: This product is DOUBLE OVERSIZED and requires an additional freight charge of $25.90 NOTE: This product is DOUBLE OVERSIZED and requires an additional freight charge of $25.90<br />
127
Baer Brakes<br />
Baer "Serious Street" Front Brake Package<br />
Incredible stopping power<br />
for your A-Body<br />
NOTE: Make sure you follow the<br />
manufacturer's directions when<br />
installing this product.<br />
$995.95<br />
Leave it to Baer to come up with a super-duty front disc brake package customized specifically for your Chevrolet! Now disc brakes designed for any stock or<br />
aftermarket 15" wheel. This system is a direct bolt-on installation for either drum or disc brake spindles. It includes the following:<br />
1.) EradiSpeed 11"-diameter rotors that are directionally vented, reverse slotted, cross-drilled and zinc-coated.<br />
2.) Hubs that are pre-assembled with Timken bearings and are pre-packed with Redline synthetic grease, ready to uncap and slide into place.<br />
3.) Pressure-cast aluminum high-performance 2-piston pad guided calipers.<br />
4.) Metallic high-performance pads.<br />
5.) Intermediate brackets, CNC-machined from solid 6061-T6 aluminum.<br />
6.) Braided stainless steel Teflon-lined brake hoses and fittings.<br />
7.) Safety enhancing 2-port master cylinder of the appropriate fluid volume.<br />
CH24875 70-72 ................................................................................................................................................................................................. KIT 995.95<br />
CH25859 70-77 Adjustable Proportioning Valve................................................................................................................................................ each 54.95<br />
NOTE: This product is DOUBLE OVERSIZED and requires an additional freight charge of $25.90<br />
Baer "Serious Street" Rear Disc Brake Kit<br />
E-Z to install, state-of-the-art system - Fantastic quality<br />
NOTE: Make sure you follow the<br />
manufacturer's directions when<br />
installing this product.<br />
$849.95<br />
Baer has created this special SERIOUS STREET Baer Claw<br />
rear disc brake package specifically for Chevrolet A-body cars<br />
equipped with 15" wheels. The package is designed to work<br />
in conjunction with Baer’s front disc brake set-ups. Easy to<br />
install , this rear system is literally state-of-the-art, with<br />
everything you’ll need to achieve consistent, controlled stops.<br />
The kit includes the following:<br />
1.) EradiSpeed 11"-diameter rotors that are directionally vented,<br />
reverse slotted, cross-drilled and zinc-coated.<br />
2.) Aluminum PBR single-piston pad guided calipers with integral<br />
park mechanism.<br />
3.) Vehicle specific park brake cables.<br />
4.) Steel intermediate brackets.<br />
5.) Braided stainless steel Teflon-lined brake hoses, fittings, and<br />
hardware.<br />
CH23949 70-72 ................................................................................................................................................................................................. KIT 849.95<br />
CH25859 70-77 Adjustable Proportioning Valve................................................................................................................................................ each 54.95<br />
NOTE: This product is DOUBLE OVERSIZED and requires an additional freight charge of $25.90<br />
128
Brake <strong>Parts</strong><br />
1970-77 Monte Carlo Drums<br />
1970-72 Drilled Brake Rotors<br />
$69.95<br />
Direct factory replacement. Made of<br />
cast iron for all applications.<br />
BD60094 70-72 rear 9.5 x 2 ........................................... each 69.95<br />
BD60198 70-72 front 9.5 x 2.5........................................ each 69.95<br />
BD60319 73-77 rear 11 X 2............................................ each 69.95<br />
1970-77 Monte Carlo Rotors<br />
$159.95<br />
Disperse brake pad gases and heat with these<br />
rotors drilled with 72 cooling holes.<br />
CH20122 70-72 ................................................................... pair 159.95<br />
Baer Eradi-Speed<br />
High-Performance Rotors<br />
NOTE: Make sure you follow the<br />
manufacturer's directions when<br />
installing this product.<br />
STARTING AT<br />
$59.95<br />
Authentic cast iron rotors for all 11"<br />
diameter applications.<br />
BD60232 70-72 front w/disc............................................ each 59.95<br />
PBD5214 73-77 front w/disc............................................ each 69.95<br />
"Power Slot" Performance<br />
Rotors<br />
STARTING AT<br />
$99.95<br />
The finish is bright, corrosion-resistant<br />
plating, and they offer the performance<br />
& strength of drilled rotors. The tapered<br />
slot design helps vent the gases from<br />
your pads & improves overall braking.<br />
Slotting is not prone to cracking.<br />
CH22228 70-72 ............................................................... left 119.95<br />
CH22229 70-72 ............................................................... right 119.95<br />
CH22230 73-77 ............................................................... left 99.95<br />
CH22231 73-77 ............................................................... right 99.95<br />
STARTING AT<br />
$109.95<br />
EradiSpeed Rotors<br />
EradiSpeed + Rotors<br />
EradiSpeed Rotors -<br />
Accelerating fast is a good thing. Stopping fast is an even better thing,<br />
and that's what these high-performance Baer replacement rotors are all about.<br />
Directional vanes inside the rotor bring more cooling air into the rotor for greater<br />
heat dissapation, equaling shorter stopping distances. Additional<br />
high-performance features include thicker friction surfaces for better heat<br />
absorbtion; a proprietary high friction, high silicone content iron; special<br />
machining to ensure parallel rotor surfaces; fully machined outside surfaces and<br />
rotors speed balanced, unlike most replacement rotors. For improved braking,<br />
install Baer high performance replacement rotors.<br />
EradiSpeed + Rotors -<br />
These rotors are 8 pounds lighter than a stock rotor & will fit with<br />
factory Rally wheels. They feature anodized black billet aluminum,<br />
CNC-machined centers, NAS (National Aerospace Specification) stainless<br />
steel hardware, cross-drilled and slotted rotors with a zinc-washed iron rotor<br />
surface. The rotors have more material to absorb more heat and help reduce<br />
rotor warping under severe braking conditions. Vanes inside the iron rotor are<br />
curved to give you a stronger rotor while delivering more cooling air for more<br />
consistent stops with little or no fade.<br />
CH25270 70-72 EradiSpeed rotors.................................. left 109.95<br />
CH25271 70-72 EradiSpeed rotors.................................. right 109.95<br />
CH25269 70-72 EradiSpeed rotors........................ pair 219.90 199.95<br />
C210235 70-72 EradiSpeed +......................................... pair 399.95<br />
NOTE: Will work with factory disc brake parts.<br />
129
Brake <strong>Parts</strong><br />
Reproduction Front Disc Brake<br />
Backing Plates<br />
1970-74 Brake Caliper Brackets<br />
$59.95<br />
These are identical match-ups to the original in fit with all proper tooling hit<br />
marks. Cadmium plated to take the wear and tear. Now in stock for prompt<br />
delivery.<br />
CHQW383 is for use with 2-pc. rotor with single-piston caliper.<br />
C980009 is for use with 1-pc. rotor with single-piston caliper.<br />
CHQW383 70-74 .................................................................... pair 59.95<br />
C980009 70-72 .................................................................... pair 59.95<br />
1970-72 A-Body Disc<br />
Brake Spindles<br />
$129.95<br />
OEM brackets that are extremely difficult to find. Mounts caliper to spindle.<br />
MP02501 70-74 ..................................................... pair 199.95 129.95<br />
Dust Covers<br />
$99.95<br />
CH20359 70-72 disc............................................................. each 99.95<br />
Disc Brake Caliper<br />
Socket<br />
$8.95<br />
Outer bearing dust covers for disc brakes.<br />
MPA3707 .................................................................................. pair 8.95<br />
Disc Brake Caliper Wrench<br />
STARTING AT<br />
$3.95<br />
If you want to use your socket wrench to break your disc brake calipers loose,<br />
then here’s what you need, a special hex Allen socket designed to easily<br />
remove GM caliper bolts.<br />
CVT0706 5/16"(8mm) hex...................................................... each 4.95<br />
CVT0704 3/8" hex................................................................... each 3.95<br />
$3.95<br />
This 3/8" hex head Allen wrench makes it easy to remove single- and four-piston<br />
brake calipers on all GM cars.<br />
CVT0703 ................................................................................ each 3.95<br />
130
Brake <strong>Parts</strong><br />
1970-77 Power Brake Booster<br />
w/Disc Brake Master Cylinder<br />
Power Brake Booster w/Drum<br />
Brake Master Cylinder<br />
PBD6467<br />
$229.95<br />
PBD6872<br />
$229.95<br />
LBS6872<br />
The easiest way to convert your early Monte Carlo to power brakes.<br />
Gold cadmium-plated booster and bracket is assembled with a new master<br />
cylinder. Direct replacement using the existing holes or studs in the firewall.<br />
Note: <strong>Original</strong> equipment design must use the lower hole in the brake pedal.<br />
LBS6872 70-72 .............................................................. each 229.95<br />
PBB7377 73-77 booster only.......................................... each 199.95<br />
LBS7377 73-77 .............................................................. each 229.95<br />
Note: May vary in appearance from original.<br />
The easiest way to convert your Monte Carlo to power brakes! This<br />
gold cadmium-plated booster and master cylinder comes completely<br />
assembled. This is a direct replacement that uses the existing holes or studs in<br />
the firewall. NOTE: <strong>Original</strong> equipment design must use the lower hole in the<br />
brake pedal.<br />
PBD6872 70-72 ................................................................. each 229.95<br />
Note: May vary in appearance from original.<br />
Power Brake Boosters<br />
Caliper Bolts<br />
PBB7377<br />
PBB6872<br />
$12.95<br />
These are the bolts that calipers slide on.<br />
MP04202 70-74 set of 4.................................................. each 12.95<br />
$199.95<br />
PBB6467<br />
These cadmium-plated boosters easily bolt on the firewall using existing holes<br />
or studs.<br />
PBB6872 70-72 ................................................................. each 199.95<br />
PBB7377 73-77 ................................................................. each 199.95<br />
Note: May vary in appearance from original.<br />
131
Brake <strong>Parts</strong><br />
1970-72 Power Booster Boot<br />
Braided Stainless Steel Brake<br />
Hose Kit<br />
$69.95<br />
$12.95<br />
This is an exact reproduction of the boot that replaces the commonly worn or<br />
corroded boot between the firewall and the power booster.<br />
C990003 70-72 ................................................................ each 12.95<br />
1970 Power Brake Booster<br />
Fittings<br />
DIN38B1<br />
$19.95<br />
DIN38B2<br />
Steel fitting - fits behind carb on the manifold attaching brake booster hose.<br />
DIN38B1 70 1-port (screw on).................................... each 19.95<br />
DIN38B2 70 2-port (screw on).................................... each 19.95<br />
Power Brake Booster Hose Kit<br />
For all 1970-77 GM single-piston calipers.<br />
MPA1755 70-77 ................................................................... pair 69.95<br />
Front Brake Hoses<br />
$18.95<br />
J319001 70-72 * drum........................................................ each 18.95<br />
PP00119 70-72 with disc..................................................... each 18.95<br />
* NOTE: Must be original disc brakes<br />
REAR HYDRAULIC BRAKE HOSES<br />
PP00120 70-72 ................................................................... each 26.95<br />
PP00121 74-75 GM............................................................. each 44.95<br />
Stainless Steel Brake Hose Sets<br />
STARTING AT<br />
$16.95<br />
Heavy-duty, thick-walled hose with black pinch clamps and OEM check valve<br />
and grommet.<br />
DE50028 70-72 327,350 small block................................ each 17.95<br />
DE50029 70-72 396,427,454 big block............................. each 16.95<br />
STARTING AT<br />
$89.95<br />
All sets include two front hoses and one rear hose. All hoses are made of<br />
braided stainless steel.<br />
C210174 70-72 drum brakes............................................... set 99.95<br />
C210175 70-72 disc brakes, SGL piston calipers............... set 99.95<br />
C210176 73-77 disc brakes................................................. set 109.95<br />
132
Brake <strong>Parts</strong><br />
Steel Power Brake<br />
Vacuum Line<br />
Power Brake<br />
Hose Clamp<br />
Brake Hose<br />
Retainer Kit<br />
INS7022<br />
$0.95<br />
Correct style clamp for 70-77.<br />
DETPC32 .................................... each 0.95<br />
$4.95<br />
The U-shaped clip that retains the brake hoses for<br />
all applications.<br />
BH2205 all (set of 3)....................... KIT 4.95<br />
1970-72 <strong>Original</strong> Brake Line Retainers<br />
$32.95<br />
Made from mild steel this is an exact duplicate of<br />
the factrory power brake tube. It has the correct<br />
bracket mounting to the intake manifold.<br />
DE50027 70 ............................ each 32.95<br />
INS7022 70 alum. intake......... each 32.95<br />
Russell Speed<br />
Bleeders<br />
STARTING AT<br />
$7.95<br />
$19.95<br />
Enough retainers in each kit for all applications.<br />
BLC1600 retainers ................................................................................................................ set 19.95<br />
Chevrolet Bleeder<br />
Screw Wrench<br />
Parking Brake<br />
Release Handle<br />
Brake bleeding is now a one person job. This<br />
revolutionary Russell Speed Bleeder replaces the<br />
original bleeder valve in your caliper/wheel cylinder<br />
with a spring loaded one-way ball and check valve<br />
design. This allows the old fluid and air out, then<br />
closes automatically between pumps preventing the<br />
old fluid and air from re-entering the brake line. Just<br />
position a container to collect the brake fluid, then<br />
remove your OEM bleeder screw and replace with<br />
the new Speed Bleeder screw. The Speed Bleeder<br />
Bag catches your old brake fluid for a no-spill<br />
operation. This is an EPA-approved, user friendly<br />
product that includes plastic tubing and a 7" x 7"<br />
plastic bag with a unique tube connection. It holds<br />
approximately 12 ounces.<br />
CH24314 speed bleeder bag. each 7.95<br />
CH24755 70-74 disc frnt 3/8" - 24...... pair 12.95<br />
CH24756 70-74 drm frnt & rr 5/16"-24 pair 12.95<br />
$7.95<br />
This bleeder screw wrench has two ends with two<br />
different sizes! 3/8" and 5/16" will work with all<br />
that have front ball joint suspension (also works on<br />
any rear suspension). Both ends have a special vent<br />
hole for fluid seepage. Designed with required length<br />
and angle for easy use.<br />
CVT0276 ........................................ each 7.95<br />
$4.95<br />
Replace your broken or missing handle with this<br />
authentic handle made of the correct plastic.<br />
A great value!<br />
PP78927 70-72 ............................ each 4.95<br />
133
Brake <strong>Parts</strong><br />
Front Wheel<br />
Cylinders<br />
1970-77 Drum Brake<br />
Hardware Kits<br />
$34.95<br />
$34.95<br />
Exact replacement in fit and function.<br />
PB33529 70-72 1-1/8"............... left 34.95<br />
PD33530 70-72 1-1/8"............... right 34.95<br />
Rear Wheel<br />
Cylinders<br />
Everything you need to restore your<br />
drum brakes. Kits include new return<br />
springs, hold down springs, adjusters,<br />
brackets, clips, hardware and backing<br />
plate plugs.<br />
MPA371 70-77 front/rear 9.5"............................................................................................ each 34.95<br />
NOTE: Requires 2 for front and rear.<br />
Drum Brake<br />
Adjuster Spoons<br />
Brake Line Hose Bolts<br />
$19.95<br />
Just like the original. Bolts right up!<br />
PB33447 70/75 9.5"drum 7/8"..... each 19.95<br />
PB33469 73-77 11" drum 15/16". each 19.95<br />
Wheel Cylinder<br />
Rebuild Kit<br />
PB66880<br />
pictured<br />
$6.95<br />
CVT0272 7" spoon...................... each 6.95<br />
Caliper Rebuild Kit<br />
$12.95<br />
Special drilled bolt that secures brake line to caliper.<br />
Includes copper washers. MP03706 is for original<br />
calipers from 1967-76.<br />
MP03706 5/16" X 24".................... pair 12.95<br />
AC Delco Check<br />
Valve & Grommet<br />
$8.95<br />
Replaces your leaky check valve and grommet for<br />
renewed performance of your vacuum booster.<br />
MPA3735 70-77 ......................... each 8.95<br />
1973-77 Spindle<br />
Nut & Washer Set<br />
$12.95<br />
$13.95<br />
Complete rebuild kit with clips, seals and springs.<br />
PB66881 70-72 front 1-1/8"........ KIT 12.95<br />
PB66880 70-75 9.5" rear 7/8"..... KIT 12.95<br />
PB66886 73-77 11" rear 15/16".. KIT 12.95 PB66848 70-77 ......................... KIT 13.95<br />
$11.95<br />
OEM-quality spindle washer, castle nut and cotter pin.<br />
MPA3709 ...................................... pair 11.95<br />
134
Brake <strong>Parts</strong><br />
New Master<br />
Cylinders<br />
1970-72 Master Cylinder Lid Kit<br />
MCAK012<br />
STARTING AT<br />
$67.95<br />
New replacement master cylinders ready to bolt on.<br />
All new components!<br />
TF73342 70 w/disc................. each 93.95<br />
TF64986 70-72 w/o disc drum..... each 82.95<br />
F101254 71-72 w/disc................. each 67.95<br />
Note: May vary in appearance from original.<br />
Disc Front/Drum Rear<br />
Proportioning Valve<br />
$24.95<br />
These are new, OEM-quality gold cadmium plated, unlike auto parts store replacements which are not<br />
OEM quality. Complete with original gaskets.<br />
MCAK013 70-72 ............................................................................................................... each 24.95<br />
NOTE: This kit also includes the original style spring clips.<br />
Wheel Seals<br />
STARTING AT<br />
$2.49<br />
PB87055 70-72 front............... each 2.49<br />
PB86605 70-72 rear................ each 2.95<br />
PB88355 73-77 rear................ each 2.95<br />
Chrome Master Cylinder Lid Kit<br />
MCAK013<br />
Wheel Bearings<br />
STARTING AT<br />
$6.95<br />
PB0J707 70-72 rear................... each 18.95<br />
PD000A2 70-77 front/outer......... each 6.95<br />
PB000A6 70-77 front/inner......... each 7.95<br />
PB000A9 73-77 rear................... each 19.95<br />
$59.95<br />
MPA1350 70-72 ................ each 89.95 59.95<br />
NOTE: part is a replacement, mounting may differ<br />
from original.<br />
1970-72 Master<br />
Cylinder Cap(Drum)<br />
CHT9100<br />
CHT9102<br />
$24.95<br />
This cap was used on vehicles with non-power<br />
drum brakes.<br />
G221359 70-72 ......................... each 24.95<br />
$5.95<br />
CHT9101<br />
For manual & power brakes. Heavy-duty steel and triple plated.<br />
CHT9100 70-72 Cover only.............................................................................................. each 5.95<br />
CHT9102 70-77 3"X 5-3/4" cover...................................................................................... each 5.95<br />
CHT9101 70-77 Cover only............................................................................................... KIT 5.95<br />
NOTE: Includes bail.<br />
135
Brake <strong>Parts</strong><br />
Disc Brake Calipers<br />
Disc Brake Pads<br />
$59.95<br />
Comes complete with pads and all new hardware. These calipers require the<br />
use of a 10MM banjo bolt.<br />
PB55052 70-72 ................................................................. left 59.95<br />
PB55007 70-72 ................................................................. right 59.95<br />
NOTE: These are remanufactured calipers.<br />
Hawk High-Performance Disc<br />
Brake Pads<br />
STARTING AT<br />
$27.95<br />
Available in stock replacement organic compound, or the more aggressive<br />
semi-metallic compound for more serious braking applications<br />
PB0D525 70-77 organic........................................................ set 27.95<br />
PB00D52 70-77 semi-metallic............................................... set 39.95<br />
ARP Wheel Studs<br />
$13.95<br />
$59.95<br />
Hawk’s special Ferro-Carbon compound provides a unique combination of<br />
durability and incredible stopping characteristics. Count on the many benefits:<br />
extremely low dust, noise-free operation, easy on rotors, long pad life, and<br />
much improved braking. A great investment that’s fully guaranteed.<br />
CH24777 70-77 ................................................................ set 59.95<br />
Wheel Studs<br />
Disc or drum, front<br />
or rear, your choice<br />
$2.50<br />
PB42027 70-72 front drum................................................ each 2.50<br />
PB42055 70-72 front disc.................................................. each 2.50<br />
PB42102 73-77 front disc.................................................. each 2.50<br />
PB42027 70-77 rear drum................................................. each 2.50<br />
Made from ultra high grade steel the ARP wheel<br />
studs are perfect for street or race applications<br />
CH24077 GM, late drum......................................................... set 13.95<br />
CH24078 GM, late disc/early................................................. set 13.95<br />
Drum Brake Shoes<br />
$24.95<br />
Available for front or rear in a performance compound.<br />
HPB0246 70-72 performance drum shoes frt 9.5"................ pair 24.95<br />
HPB0245 70-77 performance drum shoes rear 9.5"............. pair 24.95<br />
136
Parking Brake Cables<br />
1970-72 Parking Brake Cables<br />
Complete kit or individual pieces<br />
Everything you need in one single kit.<br />
Save time and money!<br />
STARTING AT<br />
$24.95<br />
Available now for the first time are these high-quality stainless steel parking brake cables. Every piece of this complete set is manufactured to OEM specifications,<br />
assuring you the highest-quality and appearance. The complete kit includes:<br />
Front cable, intermediate cable, (2) rear cables, large s-hook, (2) small s-hooks, (2) connectors, (3) clips and equalizer.<br />
C990139 Complete kit................................................................................................................................................................................. KIT 354.50 199.95<br />
C990140 Front cable.......................................................................................................................................................................................... each 69.95<br />
C990141 Intermediate cable............................................................................................................................................................................... each 24.95<br />
C990142 Rear cable (req. 2).............................................................................................................................................................................. each 54.95<br />
C990143 Large s-hook....................................................................................................................................................................................... each 9.95<br />
C990144 Small s-hook (req. 2)........................................................................................................................................................................... each 5.95<br />
C990145 Connectors (req. 2)............................................................................................................................................................................. each 6.95<br />
C990146 Equalizer............................................................................................................................................................................................. each 6.95<br />
C990147 Clips (req. 3)........................................................................................................................................................................................ each 2.50<br />
137
Change language