Wiring Harness - Original Parts Group

Largest Inventory Anywhere
We've Expanded (Again) Into A
New 2-Acre Facility To Better Serve You!
The first home of the Original Parts Group was located in Anaheim, California
and was approximately 1200 square feet. That was over 19 years ago and since
then we have moved six times, always going to larger and larger facilities to
expand our product line and improve our customer service. Our newest facility
is located on over 2 acres (90,000 square feet), making it the largest operation
in the United States devoted exclusively to GM A-body parts and accessories.
There is over 50,000 square feet under roof, with a further 4,000 square feet
under construction. We are located on Bolsa Ave., a main thoroughfare in
Huntington Beach, California, directly across the street from the southern
California headquarters facility of the Boeing Corporation. With the operational
capabilities we have in this enormous new building, we are able to pull, pack,
and fill orders for shipping with unparalleled accuracy and speed. We would like
to thank you, our loyal customers, for this explosive growth and support through
the years. Be assured that we will continue to uphold Original Parts Group's
company mission: To offer the finest reproduction and aftermarket parts and
accessories for GM A-bodies at the very best prices anywhere. So, we would
like to say…. Thank you very much for shopping at Original Parts Group.
BUY DIRECT!
We manufacture our own
Injection molded plastic/interior trim
Die Cast Moldings and Chrome Trim
Roll Formed Steel and Aluminum Parts
Die Cut Gaskets and Molded Rubber
Abbreviations Used
In This Catalog
AT/AUTO = Automatic transmission
BCKT = Bucket seat
BB = Big-block engine
CI = Cubic inches
CPE = Coupe or hardtop without pillar posts
CONV = Convertible
CYL = Cylinder (6 or 8)
DR = Door (as in 2- or 4-doors)
HP = High-performance
OM = Original Equipment Manufacturer
(usually General Motors)
PG = Powerglide
PS = Power steering
REPRO = Aftermarket reproduction designed
to original GM part specification
RR = Rear
SB = Small-block engine
STD = Standard ( non-SS or non-high performance)
TH = Turbo Hydramatic shift transmissions
4-SPD = 4-speed transmission
Left (or LH) = Driver side of vehicle
Right (or RH) = Passenger side of vehicle
Order By Phone
CALL TOLL FREE
Call Toll Free to place your order at OPG.
Simply call 1-800-243-8355. For local or
international orders, please call (714) 230-6000.
Order By FAX
FAX 24 HOURS A DAY
You can FAX your order to us 24 hours a day,
7 days a week and always get the fast service
you’ve come to expect at (714) 230-6050.
Order By Mail
Simply fill in the order form(s) in the back of this
catalog: enclose your payment of money order,
certified check, cashier’s check or credit card,
and place it in the mail. We also accept personal
checks, but the order must be held for 20 days
pending check clearance. Minimum mail order
purchase is $20.00.
Minimum Order
When ordering by mail and paying by check, we
require a $20 minimum order. Credit card orders
also require a minimum of $20. If you're purchasing
parts in person at OPG, no minimum is required.
SHOWROOM HOURS:
Monday through Friday 8:00AM to 5:00PM
Saturday 10:00AM to 3:00PM
We're closed on Sunday and Major U.S. Holidays

Quality Reproductions
At Original Parts Group, we pride ourselves on offering only the highest
quality restoration parts and accessories. Our full-time research department
ensures that all of our parts meet or exceed original factory specifications
for quality and durability. Our company philosophy enables us to offer a
"100% SATISFACTION GUARANTEE" policy on all parts.
Telephone Sales &
Customer Service Hours
Order desk hours are (Pacific Daylight Time) 7:30AM to 5:00PM Monday
through Friday, and on Saturday from 10:00AM to 3:00PM. Our showroom
opens daily at 8:00AM and on Saturday at 10:00AM.
We’re closed on Sunday and major U.S. Holidays. FAX 24 HOURS A DAY
You can FAX your order to us 24 hours a day, 7 days a week and always get the
fast service you’ve come to expect at (714) 230-6050
Methods Of Payment
All major credit cards, money orders, and cashier’s checks are accepted.
We also accept any first party, preprinted personal checks. U.S Funds only,
please. C.O.D. (Cash On Delivery) orders are also accepted to anywhere
in the continental U.S.
Customer Service Representatives
Original Parts Group’s customer service representatives are available to
answer all your restoration questions and to take orders for merchandise
six days a week. Please have your customer number ready (on your catalog
above your name) when you call in. Find out how many frequent buyer points
you have, what they’re worth, and if you have any credit to use. You can
easily check on whether your parts and accessories were shipped, the date
they were shipped, and an estimate of the date of delivery to your door.
Shop
online 24/7 at ...
GMRESTOPARTS.COM
Our website
makes it easy!
Call Toll Free:
1-800-243-8355
Includes Alaska, Hawaii and Puerto Rico
Our phone sales representatives are available to answer your
questions regarding restoration and to take orders for merchandise
six days a week. We accept VISA, MASTERCARD, AMERICAN
EXPRESS, and DISCOVER. You may also arrange to have orders
shipped C.O.D. (See “CASH ON DELIVERY” on the Ordering and
Shipping page for details.) International Customers Please Dial
(714) 230-6000.
FAX Number:
1-714-230-6050
Original Parts Group offers a convenient FAX line for customers
who have access to a FAX machine. Our FAX machine is available
24 hours a day, 7 days a week.
By Mail
5252 Bolsa Avenue, Huntington Beach, CA 92649
Simply fill in the order form(s) provided in the back of this catalog.
Money orders, certified checks and charge cards are accepted.
We recommend that you FAX your order blanks for faster service
when using a credit card, however all mail orders are processed
the same day that they are received.
Order Through
The Internet
Http://www.gmrestoparts.com
or www.originalpartsgroup.com
Check out our world wide web site and virtual catalog.
Order parts and accessories 24 hours a day on our secure
server that utilizes the latest encryption technology.
*See our Ordering and Shipping Information page in the back of this catalog for
shipping information, merchandise return policy, and important additional
Original Parts Group policies.

VOLUME
DISCOUNTS!
VOLUME
DISCOUNTS!
ARE YOU PLANNING A
MAJOR RESTORATION?
We have the largest selection and the best prices...
Why not go one step further and save an additional
5 or 10% on selected items? You can get it all here
and take advantage of the best service and selection
available anywhere!
If your order is over $1000.00 and you pre-pay
with a MONEY ORDER or CASHIER’S CHECK,
you will receive a 10% DISCOUNT PLUS FREE
FREIGHT. Order must exceed $1000.00 after
discount is applied.
If your order is over $1000.00 and you pre-pay
with a CREDIT CARD you will receive a 5%
DISCOUNT PLUS FREE FREIGHT. Order must
exceed $1000.00 after discount is applied.
If your order is over $500.00 and you pre-pay
with a MONEY ORDER or CASHIER’S Check,
you will receive a 5% DISCOUNT. Order must
exceed $500.00 after discount is applied.
IMPORTANT DISCOUNT QUALIFICATIONS:
To qualify for discount you must absolutely order all
parts at one time (no exceptions). Sorry, personal
checks do not qualify for discount (certified funds only).
C.O.D. orders are not eligible for discounts either.
Special Note:
Volume Discount pricing cannot be used in conjunction
with any other special promotions, sales, or discounts!
TRUCK FREIGHT AND OVERSIZED FedEx GROUND
ITEMS NOT FREIGHT FREE.
General Information
Credit Cards
You may place your order using VISA, MASTERCARD,
AMERICAN EXPRESS, or DISCOVER. When placing
your credit card order, be sure to include your name as
it appears on the card, the entire card number, the
date of expiration, and the security code located on the
back of VISA, MasterCard, Discover and the front of
American Express. IMPORTANT: We must be able to
verify the shipping address as the credit card holder’s.
Minimum credit card purchase is $20.00.
Money Orders & Cashier’s Check
Money orders, cashier’s check and certified checks are
accepted. On pre-paid mail orders, this is the fastest
method of insuring that your order is processed as
quickly as possible, usually within 24 hours.
Personal Checks
To use a personal check or business check on pre-paid
orders, the name, address, and check number must be
pre-printed on the check. Only first party checks will be
accepted. All orders paid by personal check are held 20
business days pending check clearance. If you are
mailing your order and need the parts in a hurry, we
recommend sending a money order, cashier’s check,
or paying by any of the major credit cards that we accept.
Prices
The prices in this catalog were in effect at the time of printing, and
supersede all prices in any previous OPG publication. OPG reserves
the right to change prices without notice. Availability of all parts and
accessories in this catalog subject to change without notice. OPG
reserves the right to discontinue products, services, and accessories
without notice.
Back Orders
Many items in our giant inventory move quickly, and rarely are we out
of stock on any items for any length of time. Over 90% of all items that
are out of stock at the time you place your original order are in within
5 days. We maintain a sophisticated back order tracking system in our
computer that automatically ships any items due to you when they become
available. Normally, back orders take as little as 5 days to receive, but can
take as much as 30 days. For an estimated time of arrival, call our
customer service department at 1-800-243-8355.
Sales Tax Information
Orders outside California are exempt from California State Sales Tax at
the time of this printing. California residents are required to add sales tax.
Due to the periodic unforeseen changes in the California Sales Tax and
Federal Interstate Tax System, rates are subject to change. The current
California State Sales Tax at the time of this printing is 7-3/4 %.
*See our Ordering and Shipping Information page in the back of this catalog for shipping information, merchandise return policy, and important additional Original Parts Group policies.

Icon References
Reproductions Manufactured in-house
by Original Parts Group.
Your satisfaction 100% Guaranteed!
We have added hundreds of new products for 2003.
From interior products to quality steel reproductions and
everything in between! Throughout the catalog there is
something new for everyone!
There are hundreds of products throughout
this catalog that are either special purchases from the
manufacturer, overstocked in our warehouse, or loss
leaders. Whatever the reason, our sale merchandise is
still the best you can get at rock bottom pricing!
Our made in the USA icon speaks for itself...
American-manufactured products, of course!
In this catalog, the GM Restoration Parts Emblem
indicates that a product is officially licensed to
Original Parts Group by General Motors.
All merchandise in this catalog having a trademark or related logo of General
Motors is licensed as necessary pursuant to copyright and trademark laws
under agreements between Original Parts Group’s supplier and General Motors.
Guide, Chevelle, El Camino and the GM RESTORATION PARTS emblems
are trademarks of General Motors Corporation and are used under license to
Original parts Group Incorporated.
Come In And Visit
Our Brand New
SHOWROOM
Table Of Contents
Interior and soft trim................. 4-71
Weatherstripping.................... 72-76
Emblems and nameplates........ 77-78
Body moldings and trim.......... 79-82
Lamp, lenses and accessories
............................................... 83-85
Door handles, hinges, and
accessories............................... 87-90
Hoods and accessories............ 91-93
Steel and fiberglass body
parts......................................... 94-103
Bumper pads and jacks................. 104
Engine and body decals...... 105-108
Suspension and Components
...........................................
Steering and brakes...........
Fuel and carburetor............
Transmission and clutch...........
Batteries and accessories....
Ignition, wiring, and electrical
........................................... 187-203
Nitrous systems and components
........................................... 204-211
Engine, components, and
accessories........................ 212-291
Cooling and air conditioning
...........................................
Exhaust components.........
Washer/wipers...................
Wheels and tires................
Tools and welding supplies
...........................................
Bolts, clips, and fasteners.....
Keys, lock sets....................
109-125
126-137
138-168
169-182
183-186
292-302
303-312
313-314
315-325
326-345
346-349
350-351
Car covers and masks............... 352
Wash/wax supplies............. 353-358
Paint and rust treatment..... 359-367
License plates, gifts, apparel
........................................... 368-402
Videos and literature........... 403-422
Order Blanks & Shipping Policy in Back of Catalog

Wiring Components
Coil & Bracket With Ballast
Resistor
1970-76 Ignition Switches
C990044
$29.95
Coil to be used on ignitions using breaker points and must be used with
proper ballast resistor connected in series with the coil to switch lead.
Not for HEI. 60,000 volt coil w/bracket and 1.4 ohm ballast resistor
CH22401 .............................................................................. KIT 29.95
1970-77 Ignition Coil
Factory replacement
$16.95
Factory replacement column-mounted ignition switch for tilt and non-tilt steering.
C990044 70-76 w/tilt (on column)............................................. each 16.95
GTZ0019 70-76 w/o tilt (on column).......................................... each 16.95
Ignition Coil Bracket
Quality replacement
$24.95
PPR1847
This is the bracket that mounts to the rear of the intake manifold and holds the
ignition coil in place. Pinch screw included with each bracket.
PPR1847 70-74 bracket (all)..................................................... each 24.95
1970-77 Internal Regulator
Conversion Kit
Convert your external
regulator to internal
$21.95
Factory original-type coil for use with breaker points distributors.
6153398 70-77 w/o HEI replacement............................... each 21.95
$18.95
This harness is necessary when converting to an internal regulated alternator.
27555 70-77 ........................................................................ each 18.95
187

Wiring Components
Original Equipment Wire Harness
Tape
Horn Kits
$11.95
This is NOT the typical electrical tape you can buy anywhere. This is the
original "hard-to-find" Chevy black "non-stick" tape designed to re-wrap old
wiring harnesses for the factory fresh look. Flame-retardant, UL listed,
1-1/4" X 108’.
WR16133 ............................................................................. each 11.95
Horn Relay
STARTING AT
$9.95
Horn relays refresh charging system security and sharpen engine
compartment detail.
TRD1756 70-71 all.............................................................. each 52.95
T344813 74-75 all.............................................................. each 9.95
TRD1776 76-77 all.............................................................. each 12.95
$24.95
These kits are direct replacements that come from AC Delco, includes all
mounting hardware.
PP00284 70-77 high note................................................... each 24.95
PP00283 70-77 "D" note..................................................... each 24.95
PP00285 70-77 low note..................................................... each 24.95
1970-77 Glove Box Lamp Kit
$12.95
Kit consists of terminal connector, wire, lamp socket and bulb. Plugs directly
into original connector.
GL10950 70-77 ................................................................. each 12.95
1970-77 Tar Fabric Loom Tape
Used on all wiring
$11.95
This kit contains the original tar-like wire cover material used in various places
on your wire harness. Commonly used on temperature sending wires, oil pressure
wires, etc.. this will add the finishing touch to your wire harness detail.
Kit includes 3’ lengths of 5/16", 3/8", and 7/16".
KR00511 70-77 .................................................................. set 11.95
188

Painless Wiring
Painless 12-Circuit & 18-Circuit Wiring Harnesses
Painless wiring is simply the highest quality wire you can buy! All Painless
harnesses use thermal cross-linked (TXL) high temperature wire. TXL wire has twice
the voltage rating of standard general purpose (GTP) wire and can withstand
temperatures up to 275 degrees. It delivers performance on
demand in high-performance applications. Plus, it will not kink
and is abrasion resistant, making it much easier to route.
Painless also utilizes OEM-style fuse blocks that
feature easy-to-find modern blade fuses, clearly
labeled circuits, and corrosion resistant
construction. With Painless wiring, each wire is
pre-printed with the application so
you know right where it goes.
With Painless, you're simply
investing in the best!
STARTING AT
$281.95
12-Circuit: All kits come with more than enough wire and terminals etc. to do the job. You cut and route to suit your needs.
S210120 GM keyed column w/signal (Painless # 10101).................................................................................................................................... each 299.95
18-Circuit: All kits come with more than enough wire and terminals.
S210201 GM keyed column ignition w/sig (Painless # 10201)............................................................................................................................ each 329.95
Painless 18-Circuit GM Musclecar Wiring Harness
Painless brand harnesses utilize
a unique thermal cross-linked
(TXL) high- temperature wire that
sets the industry standard. The
big plus here, is that TXL wire
has twice the voltage rating of
standard general purpose wire
(GTP) and can withstand much
higher temperatures (up to 275
degrees). Perfect for highperformance
applications!
Painless wiring will not kink, and
it's abrasion resistant, so your
routing will be a snap.
$423.95
Works with factory locations. Easy to install, factory original, quick connect terminals included for the in-dash printed circuit board.
Pre-terminated plugs for the ignition & turn signal switches.
S220102 (Painless # 20102)............................................................................................................................................................................... each 432.95
189

Painless Wiring
Painless Quick Disconnect
Alternator Lead
Painless Remote Starter Solenoid
$17.95
Makes engine swaps or alternator swaps easy. Can be used on even the
highest output alternators. Comes with pre-wired pigtail and mating plug.
S240110 (Painless # 40110).............................................. each 17.95
Painless Courtesy Light Kit
Light up your interior.
$31.95
Allows you to position the starter solenoid any place you need to in order to
make your installation correct. Comes with plenty of extra wire & connectors
to do the job right.
S230203 (Painless # 30203)................................................ each 31.95
Painless Circuit Fuse Blocks
Fits any application.
$29.95
Kit includes door switches, wire & light sockets to install courtesy lights inside
your vehicle.
S230702 (Painless # 30702).............................................. each 29.95
Painless Hot Shot
Give your starter a boost.
STARTING AT
$92.95
This is the most important feature of a Painless chassis harness. These fuse
blocks feature easy-to-find, modern blade-type fuses, clearly labeled circuits,
corrosion resistant construction and a compact design.
CH22470 12 - circuit (Painless # 30001)............................ each 92.95
CH22471 18 - circuit (Painless # 30003)............................ each 149.95
Painless Wiring Neutral
Safety/Backup Light Switch
Easy to mount and hookup.
$29.95
Designed to overcome starting problems due to an overheating GM-style
starter or worn-out electrical system. Works by boosting amperage to the
starter solenoid.
S230202 (Painless # 30202).............................................. each 29.95
NOTE: Easy to install.
$48.95
This kit can either be used as a neutral safety switch or a backup light switch.
The kit contains all the necessary brackets and triggers to work either function
on TH350, TH400, & 700-R4 transmissions.
CH24823 (Painless # 80175)............................................. KIT 48.95
190

Wiring Harnesses
1970-75 Engine Harness
STARTING AT
$129.95
This harness is one of two (the other being the forward lamp harness) located
in the engine compartment. It includes the wiring for the solenoid, motor,
heater blower, coil, tachometer, wiper motor, oil pressure light, brake
warning lights.
15085 70 6-cylinder, manual trans............... each 145.00 129.95
14695 70 6-cylinder, auto trans.................... each 145.00 129.95
15090 70 V8, manual trans.......................... each 145.00 129.95
14700 70 V8, automatic trans...................... each 145.00 129.95
15095 70 396-454 manual trans.................. each 145.00 129.95
15100 70 396-454 auto trans....................... each 155.00 134.95
17635 71 6-cylinder, manual trans............... each 155.00 129.55
17640 71 6-cylinder, auto trans.................... each 155.00 129.95
17455 71 V8, manual trans.......................... each 155.00 144.95
17435 71 V8, auto trans............................... each 155.00 144.95
17440 71 V8 w/turbo 400 auto trans............ each 155.00 144.95
17450 71 396-454 manual trans.................. each 155.00 144.95
17445 71 396-454 auto trans....................... each 155.00 144.95
16430 72 6-cylinder...................................... each 155.00 139.95
16435 72 V8................................................. each 155.00 139.95
17490 72 V8 w/turbo 400 auto trans............ each 155.00 149.95
16450 72 V8 w/gauges................................ each 155.00 139.95
17645 72 V8 w/turbo 400 auto & gauges..... each 155.00 149.95
17425 72 396-454 manual trans.................. each 155.00 149.95
17430 72 396-454 auto trans....................... each 155.00 149.95
17420 72 396-454 manual trans w/gauges.. each 155.00 149.95
17415 72 396-454 auto trans w/gauges....... each 155.00 149.95
17015 73 6-cylinder w/warning lights........... each 155.00 149.95
15500 73 V8 w/warning lights...................... each 155.00 149.95
15505 73 V8 w/gauges................................ each 155.00 149.95
16565 73 V8 w/TH400 & warning lights....... each 155.00 149.95
16570 73 V8 w/TH400 & gauges................. each 155.00 149.95
19010 73-74 396 & 454 w/at & warn lts............ each 165.00 159.95
19005 73-74 396 & 454 w/mt & warn lts........... each 165.00 159.95
19020 73-74 396 & 454 w/at & gauges............. each 165.00 159.95
19015 73-74 396 & 454 w/mt & gauges............ each 165.00 159.95
16595 74 6-cylinder w/warning lights........... each 155.00 149.95
22605 74 V8 w/at & warning lights............... each 155.00 149.95
22590 74 V8 w/at & gauges......................... each 155.00 149.95
22610 74 V8 w/mt & warning lights.............. each 155.00 149.95
22595 74 V8 w/mt & gauges........................ each 155.00 149.95
18615 75 6-cyl exc. integrated cyl head....... each 155.00 149.95
18610 75 6-cyl w/integrated cyl head........... each 155.00 149.95
18680 75 V8 w/HEI exc. TH400................... each 155.00 149.95
19045 75 V8 w/TH400 & HEI....................... each 155.00 149.95
IMPORTANT: These harnesses are made to order and may require up to
8 weeks delivery time. No COD orders accepted.
Rear Lamp Intermediate Harness
STARTING AT
$69.95
17715 70-71 Coupe........................................................ each 74.95
17716 72 coupe, w/o seat belt warning..................... each 69.95
36412 72 Coupe, w/seat belt warning....................... each 69.95
Forward Lamp Harness
STARTING AT
$27.95
This harness is located in the engine compartment and covers the wiring for
the headlights, battery, park lamps, side marker lamps, horn, alternator,
temp, sensor and amps gauge. IMPORTANT: These harnesses are made to
order and may require up to 8 weeks delivery time. No C.O.D. orders accepted,
this item must be pre-paid.
15165 70 V8 w/warning lights...................................... each 149.95
15010 70 V8 w/warning lights & AC............................. each 149.95
17650 70 V8 all w/gauges............................................ each 149.95
17475 71 V8 w/warning lights...................................... each 149.95
17480 71 V8 w/warning lights & AC............................. each 149.95
17470 71 V8 all w/ gauges........................................... each 149.95
18540 71 Forward park & marker lamp ext.................. each 27.95
16460 72 All................................................................. each 149.95
NOTE: 18540 requires two per car.
Rear Lamp Harness
$124.95
This harness is found inside the trunk. It carries the operations for the
brake lamps, tail lights and backup lamp harness. IMPORTANT: These
harnesses are made to order and may require up to 8 weeks delivery time.
No C.O.D. orders accepted, this item must be pre-paid.
34005 70-72 .................................................................. each 124.95
191

Wiring Harness
Reproduction Dash - Instrument
Panel Harness
Underdash Courtesy Lamps
Mounting Bracket
STARTING AT
$6.95
STARTING AT
$134.95
This complete assembly provides wiring for all instrumentation and under
dash functional wiring. Fuse block, heater control, interior console lighting (if
applicable), steering column controls and air conditioning controls where
applicable. IMPORTANT: These harnesses are made to order and may
require up to 8 weeks delivery time. Sorry, no C.O.D. orders accepted, this
item must be pre-paid.
14720 70 All, sweep gauge type..................................... each 424.95
15075 70 All, round-gauge type...................................... each 424.95
15065 70 All,rnd gauge type w/SS gauges..................... each 424.95
16290 71 All, sweep-gauge type w/warning lights.......... each 424.95
15265 71 All, round-gauge type...................................... each 424.95
15270 71 All,round-gauge type w/SS gaug..................... each 424.95
17405 72 All, sweep-gauge type..................................... each 424.95
16985 72 All, sweep gauge w/seat belt w....................... each 424.95
16420 72 All, round-gauge type w/warning lights............ each 424.95
16505 72 All, round-gauge w/seat belt w........................ each 424.95
16425 72 All, round-gauge type w/SS gauges................ each 424.95
16510 72 see note 2........................................................ each 424.95
15490 73 Lower half w/gauges w/fuse box..................... each 424.95
15495 73 Upper half w/gauges........................................ each 134.95
20740 74 W/gauges........................................................ each 449.95
NOTE: 20740 has air conditioning wiring incorporated into harness.
NOTE:2 16510 All, round-gauge w/SS gauge & SBW lights
AIR CONDITIONING HARNESS
This harness provides wiring for air conditioning relays and compressor in
the engine compartment. IMPORTANT: These harnesses are made to order
and may require up to 8 weeks delivery time. Sorry, no C.O.D. orders
accepted, this item must be pre-paid.
14965 70 .................................................. each 120.00 109.95
15440 71 .................................................. each 120.00 109.95
16465 72 .................................................. each 120.00 109.95
AIR CONDITIONING POWER FEED WIRE
Applications:
10970: 1970-71 horn relay to AC fuse,
16405: 1972 horn relay to AC fuse, all
28545 70-71 ............................................................. each 14.95
16405 72 ............................................................. each 15.95
KICKDOWN HARNESS
17565 70-72 With Turbo 400 auto trans...... each 39.95 21.95
NOTE: Harness #17565 is the switch to engine harness.
CONSOLE HARNESS
11915 70-72 Manual trans.......................... each 35.00 19.95
11925 70-72 Automatic trans...................... each 59.00 39.95
CONSOLE EXTENSION HARNESS
11920 70-72 Manual trans........................... each 59.00 19.95
28190 70-72 Automatic trans.................................... each 39.95
COURTESY LAMP HARNESS
28950 70 Under dash.......................................... each 29.95
30205 70-72 Center roof mounted dome lamp......... each 15.95
15295 71-72 Under dash.......................................... each 27.95
Left or right side, 2 required per car.
4876930 70 ................................................................... each 6.95
CRUISE CONTROL HARNESS
13185 70-72 ............................................................ each 79.00 49.95
CLOCK HARNESS
18600 70-72 Dash mount clock w/sweep speed............. each 13.95
IDLE STOP SOLENOID WIRE
All V8, except big-block with manual transmission.
17495 70 .................................................................... each 10.95
REAR WINDOW DEFROSTER HARNESS
14555 70-72 ................................................................... each 39.95
WIPER MOTOR HARNESS
28255 70 Electro-tip demand wipers.......................... each 33.95
POWER TOP HARNESS
Convertible, under dash.
35715 70 Switch-to-intermediate body ha.................. each 49.95
POWER ACCESSORY FEED WIRE
28220 70-71 Horn relay-to-circuit breaker,...................... each 10.95
28215 70-72 Circuit breaker-to-main harnes................... each 10.95
36861 70-72 Circuit breaker-to-main harnes................... each 14.95
NOTE: 28215 used with one power option only (1 cavity connector), windows or
seats or top. 36861 used with multiple power options (3 cavity connector),
windows, seats and/or top.
T.C.S. JUMPER WIRE, ENGINE HARNESS
To passenger side temp sending unit, with gauges or AC only.
17740 71 .................................................................... each 9.95
T.C.S. TRANSMISSION SWITCH EXTENSION
Manual transmission, from engine harness-to-transmission switch.
17365 72 (*)................................................................ each 29.00
17355 73 (**).............................................................. each 29.00
*Used with #16430, #16435 & #16450 engine harnesses. **Used with #15500 &
#15505 engine harnesses.
Factory Tachometer Printed
Circuit Board
STARTING AT
$89.95
KR01021 70-72 w/o factory gauges...................................... each 89.95
PZ50021 70-72 w/ factory gauges......................................... each 99.00
192

Spark Plug Wires
1970-72 Braided Ground Straps
Taylor Thunder Volt 50 Race Fit
Spark Plug Wire Sets
$119.95
$18.00
These are high-quality reproductions of the straps that ground the engine to
the frame and the frame to the body.
M1240TC 70-72 ...................................................................... set 18.00
NOTE: These also come with the bolts that screw them in and a complete
diagram highlighting the correct location of each strap.
Taylor 8MM Spiro Pro-Race
Fit Wire Sets
Taylor Cable has crafted the finest racing ignition wire available. It has the their
lowest resistance wire, 50 ohms, +/- 20%, per foot. The 10.4mm wire has
102,000 volt dielectric strength and has continuous heat protection of up to
600-degrees Fahrenheit. The Thunder Volt 50 wire has three layers of 100%
Zimplex silicone along with a ferrite spiral-wound coated core blended of an
exclusive copper-nickel alloy and a heat-treated tightly wound fiberglass braid,
so no sleeving is required. Taylor uses 100% silicone plug boots with a
vibration-proof double spring locking spark plug terminal. Available in black with
gold lettering only. Get the ultimate in spark plug wires, Taylor Thunder Volt 50.
CH25579 SB over VC/socket 90 (Taylor# 98027)................ set 119.95
CH25580 SB over VC/HEI 90 (Taylor# 98028).................... set 119.95
CH25581 SB under headers/socket 90 (Taylor# 98029)...... set 119.95
CH25582 SB under headers/HEI 90 (Taylor# 98030).......... set 119.95
CH25583 BB over VC/socket 135 (Taylor# 98031).............. set 119.95
CH25584 BB over VC/HEI 135(Taylor# 98032)................... set 119.95
CH25585 BB under headers/socket 90 (Taylor# 98001)...... set 119.95
CH25586 BB under headers/HEI 90 (Taylor# 98002).......... set 119.95
Taylor "409" Pro-Race Wire Sets
$54.95
Taylor Spiro Pro 8mm spark plug wires have a high conductivity resistor
conductor spiral wound with a stainless steel wire for more power through the
wire and to the plug. They have 10 times less resistance than standard wires
and this helps eliminate electronic interference to radios, ignitions & computer
-controlled devices. Spiro Pro wires use two layers of 100% silicone on the
outside with a temperature rating of 600-degrees without additional sleeving,
the highest on the market. The spark plug boots are low profile and have
double spring lock spark plug terminals.
CH25588 SB over VC/socket 90 (black) (Taylor# 76027)......... set 54.95
CH25589 SB over VC/HEI 90 (black) (Taylor# 76028).............. set 54.95
CH25590 SB under headers/socket 90 (black) (Taylor# 76029) set 54.95
CH25591 SB under headers/HEI 90 (black) (Taylor# 76030).... set 54.95
CH25592 BB over VC/socket 135 (black) (Taylor# 76031)........ set 54.95
CH25593 BB over VC/HEI 135 (black) (Taylor# 76032)............ set 54.95
CH25594 BB under headers/socket 90 (black) (Taylor# 76001) set 54.95
CH25595 BB under headers/HEI 90 (black) (Taylor# 76002).... set 54.95
CH25596 SB over VC/socket 90 (red) (Taylor# 76227)............. set 54.95
CH25597 SB over VC/HEI 90 (red) (Taylor# 76228)................. set 54.95
CH25598 SB under headers/socket 90 (red) (Taylor# 76229)... set 54.95
CH25599 SB under headers/HEI 90 (red) (Taylor# 76230)....... set 54.95
CH25601 BB over VC/socket 135 (red) (Taylor# 76231)........... set 54.95
CH25602 BB over VC/HEI 135 (red) (Taylor# 76232)............... set 54.95
CH25603 BB under headers/socket 90 (red) (Taylor# 76201)... set 54.95
CH25604 BB under headers/HEI 90 (red) (Taylor# 76202)....... set 54.95
CH25605 SB over VC/socket 90 (blue) (Taylor# 76627)........... set 54.95
CH25606 SB over VC/HEI 90 (blue) (Taylor# 76628)................ set 54.95
CH25607 SB under headers/socket 90 (blue) (Taylor# 76629). set 54.95
CH25608 SB under headers/HEI 90 (blue) (Taylor# 76630)..... set 54.95
CH25609 BB over VC/socket 135 (blue) (Taylor# 76631)......... set 54.95
CH25610 BB over VC/HEI 135 (blue) (Taylor# 76632).............. set 54.95
CH25611 BB under headers/socket 90 (blue) (Taylor# 76601). set 54.95
CH25612 BB under headers/HEI 90 (blue) (Taylor# 76602)..... set 54.95
$108.95
Taylor "409" Pro Race ignition wire sets provide continuous heat protection
up to 600-degrees Fahrenheit and have 102,000 volt dielectric strength.
Heat-treated, tightly woven fiberglass braid is applied over the spiro wound
conductor, which is then wound with stainless steel wire for RFI (Radio
Frequency Interference) suppression. This conductor/wire combination has
10 times less resistance than standard suppression wires. This enables
electronic ignitions, on-board computers, and cell phones to function properly.
For reliable street or track performance, you can count on Taylor "409" Pro
Race spark plug wires.
CH25551 SB over VC/socket 90 (black) (Taylor# 79027).......... set 108.95
CH25552 SB over VC/HEI 90 (black) (Taylor# 79028).............. set 108.95
CH25553 SB under headers/socket 90 (black) (Taylor# 79029) set 108.95
CH25554 SB under headers/HEI 90 (black) (Taylor# 79030)... set 108.95
CH25555 BB over VC/socket 135 (black) (Taylor# 79031)....... set 108.95
CH25556 BB over VC/HEI 135 (black) (Taylor# 79032)........... set 108.95
CH25557 BB under headers/socket 90 (black) (Taylor# 79001) set 108.95
CH25558 BB under headers/HEI 90 (black) (Taylor# 79012)... set 108.95
CH25559 SB over VC/socket 90 (red) (Taylor# 79227)............ set 108.95
CH25560 SB over VC/HEI 90 (red) (Taylor# 79228)................. set 108.95
CH25561 SB under headers/socket 90 (red) (Taylor# 79229).. set 108.95
CH25562 SB under headers/HEI 90 (red) (Taylor# 79230)...... set 108.95
CH25563 BB over VC/socket 135 (red) (Taylor# 79231).......... set 108.95
CH25564 BB over VC/HEI 135 (red) (Taylor# 79232)............... set 108.95
CH25565 BB under headers/socket 90 (red) (Taylor# 79201).. set 108.95
CH25566 BB under headers/HEI 90 (red) (Taylor# 79202)....... set 108.95
CH25567 SB over VC/socket 90 (blue) (Taylor# 79627)........... set 108.95
CH25568 SB over VC/HEI 90 (blue)(Taylor# 79628)................ set 108.95
CH25569 SB under headers/socket 90 (blue) (Taylor# 79629). set 108.95
CH25570 SB under headers/HEI 90 (blue) (Taylor# 79630)..... set 108.95
CH25571 BB over VC/socket 135 (blue) (Taylor# 79631)......... set 108.95
CH25572 BB over VC/HEI 135 (blue) (Taylor# 79632).............. set 108.95
CH25573 BB under headers/socket 90 (blue) (Taylor# 79601). set 108.95
CH25574 BB under headers/HEI 90 (blue) (Taylor# 79602)...... set 108.95
193

Spark Plug Wires
1970-72 Original Date Coded
Spark Plug Wire Sets
GM Performance Spark
Plug Wires
High-performance
Big-block or small-block
$64.95
These are original "Packard Electric" spark plug wires identical to the ones
GM used for original equipment. They feature original-style molded rubber
boots and are date-coded for a complete, factory fresh appearance.
1230693 70 (early) small block........................................ each 64.95
1230701 70 (late) small block.......................................... each 64.95
1310693 70 (early) big block........................................... each 64.95
1310701 70 (late) big block............................................. each 64.95
1230703 71 (early) small block........................................ each 64.95
1230711 71 (late) small block.......................................... each 64.95
1230713 72 (early) small block........................................ each 64.95
1230721 72 (late) small block.......................................... each 64.95
1310703 71 (early) big block........................................... each 64.95
1310711 71 (late) big block............................................. each 64.95
1312713 72 (early) big block........................................... each 64.95
1312721 72 (late) big block............................................. each 64.95
NOTE: Cars built during February (of the model yr) or later are considered late style.
MSD 8.5MM Super Conductor
Spark Plug Wire Set
$124.95
These performance wires are made for rear mounted distributors. These are
8mm red cables with contrasting white logos and black boots. Double wall
silicone construction, silicone boots and 600 ohms per foot resistance. Includes
10" coil lead and four wire separators.
CH20214 SB - Bow Tie........................................................... set 124.95
CH20215 BB - Bow Tie........................................................... set 124.95
CH20216 SB - GM Performance............................................ set 124.95
CH20217 BB - GM Performance............................................ set 124.95
1970-77 Pertronix Spark
Plug Wires
STARTING AT
$76.95
Set includes terminals for engines with early and late-type distributor caps.
Straight & 90-degree boots & terminals factory installed on one end.
CH20101 90 degree/90 degree (red) (MSD# 31239)............. set 79.95
C200201 90 degree/straight (red) (MSD# 31199)................. set 76.95
CH24969 90 degree/straight (black) (MSD # 31233)............. set 89.95
CH24970 90 degree/90 degree (black) (MSD # 31223)........ set 79.95
$44.95
New from Pertronix are these 8mm, 90-degree & 90-degree/ straight spark
plug wire sets. Made for all V8 engines.
L201261 70-77 black 90 degree (Pertronix # 808290)........ set 44.95
L201262 70-77 blue 90 degree (Pertronix # 808390)......... set 44.95
L201263 70-77 red 90 degree (Pertronix # 808490)........... set 44.95
CH22495 70-77 black 90/straight (Pertronix # 808280)....... set 44.95
CH22496 70-77 blue 90/straight (Pertronix # 808380)......... set 44.95
CH22497 70-77 red 90/straight (Pertronix # 808480).......... set 44.95
194

Spark Plug Accessories
MSD Short HEI Boot Set
Taylor Spiro-Pro/.409 Strip
& Crimp Tool
$12.95
A complete set of high temp. boots and locking dual crimp terminals for your
custom wire set.
CH22389 (MSD # 8848).......................................................... set 12.95
Taylor Spark Plug & Coil Wire
Repair Kit
$12.95
A must when stripping Spiro-Pro wires. Cuts just the right amount of wire
insulation, without damaging the Spiro-Wound conductor. Crimps terminals
with aid of bench vise. For 8mm/10.4mm sizes.
CH25587 (Taylor # 43395)................................................... each 12.95
Taylor Pro Multiple Purpose
Wire Tool
STARTING AT
$9.95
Taylor cable makes it easy to replace or repair one spark plug or coil wire
at a time. Available for the extra large 10.4mm diameter wire and the 8mm
wire, these repair kits are available in several colors. Spark plug wire kits have
a 90-degree boot on one end and a 180-degree boot on the other and they
HEI end and the wire is 36" long. These kits make repair a single wire very
easy and cost-effective.
CH38300 available colors: Black, blue, or red.
CH38400 available colors: Black, blue, red, or yellow.
CH38300 "409" 10.4mm Spiro-Wound.................................... KIT 22.95
CH38400 8mm Spiro-Pro 90/180............................................ KIT 13.95
CH38800 coil wire (409).......................................................... KIT 13.95
CH38900 coil wire (8mm)........................................................ KIT 9.95
Taylor Convoluted Tubing
$13.95
Made of high carbon steel, cuts and strips automotive primary wire (10-22
gauge), crimps insulated and non-insulated solderless terminals. Crimps
7-8m spark plug wire ends.
CH25578 (Taylor # 43390)................................................... each 13.95
Taylor Spark Plug Boot
Removal Tool
$13.95
These packages come with multiple sizes per package (1-1/4", 1-3/8", 1-1/2"
1-3/4"). Each size is a 10 ft. roll. Made of flexible polyethylene tubing,
they protect wires from abrasions and heat.
Colors available: Black, blue, purple, red, teal, white, or yellow.
CH38500 ................................................................................. set 13.95
$11.95
Removes wires from plugs without damaging wire and plug boots.
Prevent burns to fingers.
CH25577 (Taylor # 43392)................................................... each 11.95
195

Spark Plug Accessories
"Cool It " Thermo-Sleeve
Taylor Clamp-Style Wire
Separators
STARTING AT
$13.95
Lamination of a high-temperature fabric to a highly reflective foil is the
make-up of the thermo-sleeve, which provides protection from radiant heat
for hoses and wires. Thermo-sleeve’s ultra-lightweight construction provides
more insulating than traditional bulky rubber-coated fiberglass. The aluminized
sleeving reflects over 90 percent of radiant heat, and is fire-proof &
oil-resistant.
CH25142 3’ x 1/4" - 1/2"....................................................... each 13.95
CH25143 3" x 5/8" - 1".......................................................... each 15.95
CH25144 3’ x 1-1/8" - 1-1/2"................................................. each 19.95
CH25145 3’ x 1-5/8" - 2"....................................................... each 23.95
CH25146 3’ x 2-1/8" - 2-1/2"................................................. each 25.95
CH25147 12’ x 1/4" - 1/2"..................................................... each 42.95
CH25148 12’ x 5/8" - 1"........................................................ each 54.95
CH25149 12’ x 1-1/8" - 1-1/2"............................................... each 66.95
CH25150 12’ x 1-5/8" - 2"..................................................... each 78.95
CH25151 12’ x 2-1/8" - 2-1/2"............................................... each 90.95
MSD Boot Armor
STARTING AT
$17.95
Separates, organizes, and supports plug wires. Molded from non-conductive
6/6 nylon. Will not melt, mar, distort, crack, or fade. Available in black, blue,
or red.
CH38100 7-8mm...................................................................... set 17.95
CH38200 "409" 10.4mm........................................................... set 21.95
Taylor Clip-On Colored
Wire Separators
$19.95
The ultimate heat protection for your spark plug boots! These stainless steel
sleeves provide a heat shielding armor around the spark plug boot. The 321
stainless material features an embossed pattern for durable strength and is
annealed for forming ease. This resilient material can handle over 2500
degrees making these the best protection you can achieve against exhaust
heat. Includes Dual Crimp Spark Plug terminals, high heat boots and two
Boot Reflectors.
CH24956 90-degree............................................................. pair 19.95
CH24957 135-degree........................................................... pair 19.95
CH24958 straight.................................................................. pair 19.95
MSD Shrink Sleeve With
Numbers
STARTING AT
$8.95
Made of tough nylon that withstands 400 degrees. Each set contains 2 each
of 2-, 3-, and 4-wire separators. CH38600 available colors: Black, blue,
red, or yellow. CH38700 available colors: Black, blue, or red.
CH38600 7-8mm....................................................................... set 8.95
CH38700 "409" 10.4mm........................................................... set 9.95
Universal Spark Plug Wire
Divider Set
$12.95
This sleeving simply slides over the spark plug boot or other connection &
will shrink tightly around it for a secure connection. The sleeves have the
cylinder numbers on them so each wire is clearly marked to prevent any
confusion.
CH24955 .............................................................................. set 12.95
$35.95
This universal spark plug wire divider kit features your choice of a color
aluminum bracket with adjustable mounts to provide fit for a variety of
applications.
C210304 brushed aluminum................................................... pair 35.95
196

Spark Plug Accessories
MSD Pro Crimping Tool
GM HEI Distributor
$54.95
Making plug wires on your own is easy with the MSD Pro Crimping Tool. This
tool provides a "die" to strip either 8mm Heli-Core or 8.5mm Super Conductor
Wire, then it can be used as a vise to provide a solid terminal crimp to the
wire.
CH20326 ............................................................................. each 54.95
Spark Plug Heat Shields
Helps prevent melting plug wires and fouling spark
plugs.
STARTING AT
$34.95
These are the heat shields that cover the spark plug from the extreme heat
of exhaust manifolds. Complete set.
DESPB12 70 Small-block............................................................ 34.95
TWM3130 70-71 Big-block (pictured)............................................... 54.00
Spark Plug Wire Supports
Wire Supports
$289.95
This complete distributor is the same one used in
all GM crate engines with roller cams that are
made of steel. Will not work on "tall" decks and has
melonized cam drive gear.
CH23878 SB/BB....................................................................... each 289.95
MSD Pro-Billet Chevrolet V-8
Distributors
STARTING AT
$229.95
STARTING AT
$7.95
Mounting on the valve cover, these wire supports shield heat from the
manifold. They’re original GM pieces that fit all small-blocks. Now in stock.
87A0058 70 ................................................................ each 19.95
87A0061 70-74 ................................................................ each 7.95
Note: 87A0061 mounts on the right front or left rear of the valve cover.
This is the perfect upgrade for the outdated points distributors or outdated HEI’s.
Made for street driven cars, this system is built around a precision CNC-machined
billet aluminum housing. This ignition system is made to smooth out the idle,
improve starting and provide a much higher rpm range. The Ready-To-Run
features MSD’s adjustable mechanical advance so you can custom tailor an
ignition curve to match engine needs. System is complete, ready to
drop-in and go.
C990110 Use w/blaster 2 coil................................................... each 299.95
C990112 Replacement cap...................................................... each 20.95
G200065 Hi-perf replacement rotor.......................................... each 18.95
CH20418 Use w/6AL box.......................................................... each 229.95
197

MSD
MSD Ready-To-Run Pro-Billet
Distributor Kit
MSD Pro-Billet GM
HEI Distributor
$334.95
This is the perfect upgrade for an outdated points or HEI distributors.
Designed for street driven cars, this system is built around a billet aluminum
housing that is CNC-machined to exact tolerances. An oversized steel shaft is
guided by a sealed ball bearing and an extra-long sintered bushing for high
RPM stability and endurance. Features an easy-to-adjust mechanical advance,
along with a vacuum andvance to dial in performance. Distributor has a
built-in module that provides a much more powerful spark than any stock
HEI. Includes Blaster 2 coil, coil bracket, coil wire, standard distributor cap
and a HEI-style distributor cap.
C990111 70-74 (MSD # 8474)........................................... KIT 334.95
MSD Super HEI Kit
$369.95
MSD engineers created this ignition system to be
capable of running above 9,000 RPM, which is 50%
more current than stock units that lose spark energy at
approximately 4,500 RPM. This unit also delivers a
much more precise timing signal. Features include a
magnetic pickup, billet reluctor, Tuftride-coated shaft
that is guided by a sealed ball bearing and long
sintered bushing, adjustable mechanical advance
assembly, all which is enclosed in a billet aluminum
housing that is CNC-machined. This is a complete set
up, ready to drop in.
C990106 70-74 (MSD # 8365)........................................ each 369.95
C990107 70-74 replacement cap (MSD # 8411)............ each 22.95
C990108 70-74 replacement rotor (MSD # 8410)........... each 5.95
C990109 70-74 replacement coil (MSD # 8225)............. each 79.95
MSD Pro-Billet Chevrolet V-8
Distributors
STARTING AT
$259.95
Both Super HEI kits allow you to remove or bypass the low-powered HEI
module and coil and replace them with the MSD 6A or 6AL ignition control
and the Blaster 2 high output coil. The result is more power, increased RPM
range, easier starting, plus better mileage & performance.
Kit includes: MSD ignition (6A or 6AL), Blaster 2 coil, coil wire,
HEI dust cover & coil bracket. The 6AL has a Soft Touch Rev
Control to protect your engine from over-rev damage.
CH22385 MSD 6A box (MSD # 8400).................................. KIT 259.95
CH22386 MSD 6AL box (MSD # 8500)................................ KIT 299.95
STARTING AT
$229.95
This is the perfect upgrade for outdated points or
HEI distributors. This distributor is built around a billet
aluminum housing that is CNC-machined to exact
tolerances. An oversized steel shaft is guided by a
sealed ball bearing and an extra-long sintered bushing
for high RPM stability and endurance.
C990110 70-74 use w/Blaster 2 coil (MSD# 8360)........ each 299.95
C990112 70-74 replacement cap (MSD# 8437)............. each 20.95
CH20418 70-74 use w/6AL box (MSD# 8361)............... each 229.95
G200065 70-74 hi-perf replacement rotor (MSD# 8467) each 18.95
198

MSD
MSD Ultimate HEI Kit
MSD Blaster 2 Points Coil Kit
$149.95
For use with non-computerized (4-pin module) HEI models only. Rebuild your
GM HEI with MSD performance. Exceptional high-speed coil saturation for full
power, high RPM operation. Matched coil & module produce the highest
voltage and energy. Complete kit with a brass terminal cap, rotor, module,
coil & dust cover.
CH22390 (MSD # 8501)...................................................... KIT 149.95
STARTING AT
$41.95
These coils put out 45,000 volts, 15,000 more than stock. They also have
an oil-filled metal cannister and fit stock brackets. Comes with a ballast
resistor.
CH22383 chrome (MSD # 8200)...................................... KIT 44.95
CH22384 red (MSD # 8203)............................................. KIT 41.95
MSD 6A/6AL Ignition Box
STARTING AT
$179.95
Whether looking for more power or better fuel economy, the MSD 6 or 6AL
will fill the need. This box will work on virtually any vehicle as long as it has
a 12-18 volt electrical system. Get quicker ET’s, easier starts, reduced plug
fouling and better fuel economy. The 6AL system includes Soft Touch Rev
Control to help protect your vehicle in case of missed shifts or driveline failure.
CH20096 MSD 6AL (MSD # 6420)..................................... each 239.95
CH20496 MSD 6A (MSD # 6200)....................................... each 179.95
199

MSD
MSD Digital-6 Plus
Ignition Control
MSD Blaster Ignition Coils
STARTING AT
$31.95
$323.95
The fastest of all digital ignitions. The Digital-6 allows you to switch between
two 100 RPM rotary switch increments. A single stage retard for nitrous and
top-end performance. Start retard eases pressure on the starter, flywheel
& engine. Adjustable magnetic pickup compensation produces accurate
trigger signals. LED display warns of trigger signal problems or faulty
charging system. Fully potted with polyurethane for vibration and water
protection.
CH22391 (MSD # 6520)................................................... each 323.95
MSD Blaster HVC II
MSD Blaster Coils are an upgrade to your stock coil or if you want to
complement the performance of your MSD Ignition. These coils do not include
a ballast resistor. When using an MSD Ignition Control, the ignition is
responsible for delivering the voltage to the coil so a ballast is not necessary.
Ths Blaster 3 Coil features an extra tall tower to improve the coil wire
attachment and spark isolation. Includes 90-degree terminal and boot.
CH20097 Blaster 2 (MSD # 8202)........................................... each 31.95
CH20098 Blaster 3 (MSD # 8223)........................................... each 39.95
MSD Blaster SS Coil
$44.95
The efficient e-core windings are designed to produce high amounts of current
without sacrificing the voltage output. In fact, when used with an MSD 6
series ignition, the Blaster SS produces 300 milliamp with a maximum voltage
output of 40,000 volts.
CH25810 ................................................................................ each 44.95
MSD GM High Energy HEI Module
$119.95
New coil technology to be used with the MSD 6 series line for incredible
voltage and high current. Efficient windings and material produce incredible
voltage. Lightning quick rise time and lengthy spark duration. Windings
are completely potted with a fracture resistant compound for vibration
resistance.
CH25811 (MSD# 8253)..................................................... each 119.95
$74.95
MSD has created a high energy ignition module to replace the stock GM HEI
ignitions with an internal coil. These modules are capable of delivering
sparks up to 9,000 RPM, and hold a more precise and dwell control at high
RPM. It also produces 50% higher coil drive current than the stock module,
which saturates the coil faster and gives you more spark energy at top speeds.
L998364 70-77 .................................................................... each 74.95
200

MSD
MSD Digital Ignition Tester
MSD Self-Powered Timing Light
$156.95
This valuable tool allows you to test your ignition while it’s in the car.
The tester produces a simulated trigger signal that fires the ignition as if
the engine were running. A special load-producing clip-on spark plug is
included to connect the coil wire. If the spark is unable to jump the gap of
the tester, there is an ignition problem and you can trace it. The tester has
an LCD display that will show simulated RPM, so you can test RPM limits,
RPM activated switches, shift light operation and tachometer.
CH20327 70-77 (MSD# 8998).............................................. each 156.95
MSD Distributor Clamps
STARTING AT
$24.95
$179.95
When timing your engine nothing is easier to use than MSD’s self-powered
timing light. The light does not require 12 volts like other lights, it uses six AAA
batteries, which means no wires hanging in your engine compartment.
CH20102 70-77 (MSD# 8212)............................................... each 179.95
MSD Firewall Feed-Thru
MSD’s billet Chevrolet distributor hold down clamp is strong enough to keep
the timing locked in place whether using an MSD Billet or Pro-Mag distributor.
CNC-machined from steel. Each clamp includes mounting stud, lock washer
& nut.
CH22392 Rounded (MSD # 8010).......................................... each 36.95
CH22393 Black standard shape (MSD # 8110)...................... each 24.95
CH22394 Polished standard shape (MSD # 8540).................. each 36.95
$11.99
Your Satisfaction Guaranteed
This handy piece will prevent voltage leaks in the passenger compartment
mounted coil. Molded from Rynite and nylon, it will give you 1/2" of insulation to
ensure the coil’s spark reaches the distributor.
CH20100 70-77 (MSD# 8991).............................................. each 11.99
201

Pertronix
Pertronix "Second Strike"
Ignition Box
Flame Thrower HEI Distributor
By Pertronix
CT20192
M200005
C210031
CT20183
$284.95
Your factory inductive-type ignition is known for its long burn time, but not
necessarily its high energy. Capacitive discharge (CD) ignitions are known for
their high energy, but not long burn time. Pertronix has combined the two with
its "Second Strike" ignition supplement that uses your stock ignition as the
primary spark producer and follows it with a second spark, anywhere from
2-18 crank degrees later, from its "Second Strike" CD box. This assures you
of complete burning of the air/fuel mixture in the combustion chamber. And it
means you can get more power, better combustion efficiency and reduced
plug fouling. The "Second Strike" also has a built-in rev limiter that randomly
cuts out a spark from different cylinders to reduce plug fouling when you over
rev your engine. This ignition supplement works with most OEM and
aftermarket non-CD ignitions and is compatible with most modern tachs
without an interface.
CH25765 ............................................................................ each 284.95
Pertronix "Ignitor" Electronic
Ignition
STARTING AT
$229.95
The Flame Thrower distibutor is built to operate without misfire up to a
minimum of 7500 RPM. Two extra sets of springs are included to help
customize your advance curve for specific motor applications.
CT20181 GM HEI dist. cap/rotor (black) (Pertronix# D4000).......... set 24.95
CT20182 GM HEI dist. cap/rotor (red) (Pertronix# D4001)............. set 24.95
CT20183 HEI dist. cap (black) (Pertronix# D4050)......................... each 21.95
CT20184 HEI dist. cap (red) (Pertronix# D4051)............................ each 21.95
CT20185 HEI rotor (red) (Pertronix# D4061)................................. each 9.95
CT20186 HEI rotor (blue) (Pertronix# D4062)................................ each 9.95
CT20192 GM HEI 50,000 volt coil (red/yellow) (Pertronix# D3000) each 44.95
C210029 Complete distributor (black cap) (Pertronix# D1000)....... each 229.95
C210030 Complete dist. (black cap/machined) (Pertronix# D1050) each 229.95
C210031 Complete distributor (red cap) (pertronix# D1001)......... each 229.95
C210032 Ccomplete dist. (red cap/machined) (Pertronix# D1051) each 229.95
Pertronix Billet Distributor
Powerful spark
CT20186
STARTING AT
$73.95
Ignitor I - Get the performance of an electronic ignition system while retaining
your stock distributor. Test results show twice the voltage to spark plugs,
which increases horsepower, fuel economy and plug life. System fits entirely
inside the distributor. Guaranteed for 30 months.
Ignitor II - Utilizes a powerful new microprocessor that controls the dwell
period, for the best possible spark over the entire RPM range. The electronic
module is a huge step up from your old point-type ignition. It offers you quicker
starting, longer plug-life and increased horsepower. Best of all, you get all
these advantages at a much lower price than those more expensive
"box-type" ignition systems.
CH20137 70-72 Ignitor I..................................................... each 73.95
SK00001 70-72 Ignitor II.................................................... each 105.95
$218.95
The Flame-Thrower billet distributor uses the Ignitor II
electronic module for a more powerful spark and more
stable timing throughout the RPM range.
The Flame-Thrower distributor is compatible with
most coils and comes with a high dielectric strength
cap with brass terminals and a premium rotor.
Completely adjustable with a mechanical advance
limiter and additional advance springs for a custom
curve.
CH24914 Black cap (Pertronix # D100700)......................... each 218.95
CH24915 Red cap (Pertronix # D100701)............................ each 218.95
202

Ignition Accessories
Pertronix High Performance Coils
STARTING AT
$25.95
The "Flame-Thrower" high performance coil
delivers 15% more spark which allows for larger
spark plug gap for added power, smoother
response and better fuel economy. The "Flame
Thrower" delivers a full 40,000 volts. "Flame-
Thrower II" coils maximize energy and reliability
over the full RPM range, enable larger plug gaps
for greater fuel economy and increased power
levels and they’re 50 state legal. These coils are
rated at 45,000 volts and are intended for use with
the Ignitor II ignition system.
CH20139 Flame-Thrower I (chrome) (Pertronix# 40001).... each 27.95
CH20140 Flame-Thrower I (black). (Pertronix# 40011)...... each 25.95
SK00002 Flame-Thrower II (chrome) (Pertronix# 45001)... each 37.99
SK00003 Flame-Thrower II (black) (Pertronix# 45011)...... each 32.99
Pertronix Digital Rev Limiter
ARP Distributor Stud Kit
STARTING AT
$3.95
Make sure you lock your timing into place with ARP’s distributor stud kit. Available
in black oxide or stainless steel, both with vibration resistant J-form threads.
CH20038 black oxide..................................................................... KIT 3.95
CH20039 stainless......................................................................... KIT 5.95
B&B Distributor Clamps
STARTING AT
$9.95
Heavy-duty, precision die-cut from extra-thick steel, B&B clamps are much
stronger than factory clamps. the flat design provides additional clearance
at the distributor body. Studs and nuts included.
CH24348 SB,BB, & 90 deg. V6 (gold)........................................... KIT 9.95
CH24349 SB,BB, & 90 deg. V6 (chrome)...................................... KIT 10.95
ARP Coil Bracket Bolt Kits
$154.95
The Digital Rev Limiter digitally controls RPM limits by stealing random sparks
just one RPM past the limiter setting. This reduces spark plug fouling common
to other rev limiters. You can set the limits in 100 RPM increments using
easy-to-adjust rotary switches and with the TTL interface, the Digital Rev
Limiter is compatible with most modern tachs. Limiter will operate on 6-18
volts and has a 4-wire hookup for easy installation.
CH24916 (Pertronix # 600)................................................. each 154.95
HEI Advance Curve Kit
Close-up
Shown
STARTING AT
$4.95
CH24080 black oxide (hex)........................................................... KIT 4.95
CH24081 black oxide (12-point).................................................... KIT 4.95
CH24082 stainless (hex)............................................................... KIT 6.95
CH24083 stainless (12-point)........................................................ KIT 6.95
1970-77 Distributor Hold Down
Clamp
$4.95
Copper spring - light
Silver spring - medium
Brown spring - heavy
CH22399 ........................................................................... KIT 4.95
$2.99
Ideal to hold distributor or magneto in place for accurate timing. Replaces
late-model stock wire clamps. Extra bright chrome plating.
CHT4116 70-77 All V8........................................................................... 2.99
203