You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Largest Inventory Anywhere<br />
We've Expanded (Again) Into A<br />
New 2-Acre Facility To Better Serve You!<br />
The first home of the <strong>Original</strong> <strong>Parts</strong> <strong>Group</strong> was located in Anaheim, California<br />
and was approximately 1200 square feet. That was over 19 years ago and since<br />
then we have moved six times, always going to larger and larger facilities to<br />
expand our product line and improve our customer service. Our newest facility<br />
is located on over 2 acres (90,000 square feet), making it the largest operation<br />
in the United States devoted exclusively to GM A-body parts and accessories.<br />
There is over 50,000 square feet under roof, with a further 4,000 square feet<br />
under construction. We are located on Bolsa Ave., a main thoroughfare in<br />
Huntington Beach, California, directly across the street from the southern<br />
California headquarters facility of the Boeing Corporation. With the operational<br />
capabilities we have in this enormous new building, we are able to pull, pack,<br />
and fill orders for shipping with unparalleled accuracy and speed. We would like<br />
to thank you, our loyal customers, for this explosive growth and support through<br />
the years. Be assured that we will continue to uphold <strong>Original</strong> <strong>Parts</strong> <strong>Group</strong>'s<br />
company mission: To offer the finest reproduction and aftermarket parts and<br />
accessories for GM A-bodies at the very best prices anywhere. So, we would<br />
like to say…. Thank you very much for shopping at <strong>Original</strong> <strong>Parts</strong> <strong>Group</strong>.<br />
BUY DIRECT!<br />
We manufacture our own<br />
Injection molded plastic/interior trim<br />
Die Cast Moldings and Chrome Trim<br />
Roll Formed Steel and Aluminum <strong>Parts</strong><br />
Die Cut Gaskets and Molded Rubber<br />
Abbreviations Used<br />
In This Catalog<br />
AT/AUTO = Automatic transmission<br />
BCKT = Bucket seat<br />
BB = Big-block engine<br />
CI = Cubic inches<br />
CPE = Coupe or hardtop without pillar posts<br />
CONV = Convertible<br />
CYL = Cylinder (6 or 8)<br />
DR = Door (as in 2- or 4-doors)<br />
HP = High-performance<br />
OM = <strong>Original</strong> Equipment Manufacturer<br />
(usually General Motors)<br />
PG = Powerglide<br />
PS = Power steering<br />
REPRO = Aftermarket reproduction designed<br />
to original GM part specification<br />
RR = Rear<br />
SB = Small-block engine<br />
STD = Standard ( non-SS or non-high performance)<br />
TH = Turbo Hydramatic shift transmissions<br />
4-SPD = 4-speed transmission<br />
Left (or LH) = Driver side of vehicle<br />
Right (or RH) = Passenger side of vehicle<br />
Order By Phone<br />
CALL TOLL FREE<br />
Call Toll Free to place your order at OPG.<br />
Simply call 1-800-243-8355. For local or<br />
international orders, please call (714) 230-6000.<br />
Order By FAX<br />
FAX 24 HOURS A DAY<br />
You can FAX your order to us 24 hours a day,<br />
7 days a week and always get the fast service<br />
you’ve come to expect at (714) 230-6050.<br />
Order By Mail<br />
Simply fill in the order form(s) in the back of this<br />
catalog: enclose your payment of money order,<br />
certified check, cashier’s check or credit card,<br />
and place it in the mail. We also accept personal<br />
checks, but the order must be held for 20 days<br />
pending check clearance. Minimum mail order<br />
purchase is $20.00.<br />
Minimum Order<br />
When ordering by mail and paying by check, we<br />
require a $20 minimum order. Credit card orders<br />
also require a minimum of $20. If you're purchasing<br />
parts in person at OPG, no minimum is required.<br />
SHOWROOM HOURS:<br />
Monday through Friday 8:00AM to 5:00PM<br />
Saturday 10:00AM to 3:00PM<br />
We're closed on Sunday and Major U.S. Holidays
Quality Reproductions<br />
At <strong>Original</strong> <strong>Parts</strong> <strong>Group</strong>, we pride ourselves on offering only the highest<br />
quality restoration parts and accessories. Our full-time research department<br />
ensures that all of our parts meet or exceed original factory specifications<br />
for quality and durability. Our company philosophy enables us to offer a<br />
"100% SATISFACTION GUARANTEE" policy on all parts.<br />
Telephone Sales &<br />
Customer Service Hours<br />
Order desk hours are (Pacific Daylight Time) 7:30AM to 5:00PM Monday<br />
through Friday, and on Saturday from 10:00AM to 3:00PM. Our showroom<br />
opens daily at 8:00AM and on Saturday at 10:00AM.<br />
We’re closed on Sunday and major U.S. Holidays. FAX 24 HOURS A DAY<br />
You can FAX your order to us 24 hours a day, 7 days a week and always get the<br />
fast service you’ve come to expect at (714) 230-6050<br />
Methods Of Payment<br />
All major credit cards, money orders, and cashier’s checks are accepted.<br />
We also accept any first party, preprinted personal checks. U.S Funds only,<br />
please. C.O.D. (Cash On Delivery) orders are also accepted to anywhere<br />
in the continental U.S.<br />
Customer Service Representatives<br />
<strong>Original</strong> <strong>Parts</strong> <strong>Group</strong>’s customer service representatives are available to<br />
answer all your restoration questions and to take orders for merchandise<br />
six days a week. Please have your customer number ready (on your catalog<br />
above your name) when you call in. Find out how many frequent buyer points<br />
you have, what they’re worth, and if you have any credit to use. You can<br />
easily check on whether your parts and accessories were shipped, the date<br />
they were shipped, and an estimate of the date of delivery to your door.<br />
Shop<br />
online 24/7 at ...<br />
GMRESTOPARTS.COM<br />
Our website<br />
makes it easy!<br />
Call Toll Free:<br />
1-800-243-8355<br />
Includes Alaska, Hawaii and Puerto Rico<br />
Our phone sales representatives are available to answer your<br />
questions regarding restoration and to take orders for merchandise<br />
six days a week. We accept VISA, MASTERCARD, AMERICAN<br />
EXPRESS, and DISCOVER. You may also arrange to have orders<br />
shipped C.O.D. (See “CASH ON DELIVERY” on the Ordering and<br />
Shipping page for details.) International Customers Please Dial<br />
(714) 230-6000.<br />
FAX Number:<br />
1-714-230-6050<br />
<strong>Original</strong> <strong>Parts</strong> <strong>Group</strong> offers a convenient FAX line for customers<br />
who have access to a FAX machine. Our FAX machine is available<br />
24 hours a day, 7 days a week.<br />
By Mail<br />
5252 Bolsa Avenue, Huntington Beach, CA 92649<br />
Simply fill in the order form(s) provided in the back of this catalog.<br />
Money orders, certified checks and charge cards are accepted.<br />
We recommend that you FAX your order blanks for faster service<br />
when using a credit card, however all mail orders are processed<br />
the same day that they are received.<br />
Order Through<br />
The Internet<br />
Http://www.gmrestoparts.com<br />
or www.originalpartsgroup.com<br />
Check out our world wide web site and virtual catalog.<br />
Order parts and accessories 24 hours a day on our secure<br />
server that utilizes the latest encryption technology.<br />
*See our Ordering and Shipping Information page in the back of this catalog for<br />
shipping information, merchandise return policy, and important additional<br />
<strong>Original</strong> <strong>Parts</strong> <strong>Group</strong> policies.
VOLUME<br />
DISCOUNTS!<br />
VOLUME<br />
DISCOUNTS!<br />
ARE YOU PLANNING A<br />
MAJOR RESTORATION?<br />
We have the largest selection and the best prices...<br />
Why not go one step further and save an additional<br />
5 or 10% on selected items? You can get it all here<br />
and take advantage of the best service and selection<br />
available anywhere!<br />
If your order is over $1000.00 and you pre-pay<br />
with a MONEY ORDER or CASHIER’S CHECK,<br />
you will receive a 10% DISCOUNT PLUS FREE<br />
FREIGHT. Order must exceed $1000.00 after<br />
discount is applied.<br />
If your order is over $1000.00 and you pre-pay<br />
with a CREDIT CARD you will receive a 5%<br />
DISCOUNT PLUS FREE FREIGHT. Order must<br />
exceed $1000.00 after discount is applied.<br />
If your order is over $500.00 and you pre-pay<br />
with a MONEY ORDER or CASHIER’S Check,<br />
you will receive a 5% DISCOUNT. Order must<br />
exceed $500.00 after discount is applied.<br />
IMPORTANT DISCOUNT QUALIFICATIONS:<br />
To qualify for discount you must absolutely order all<br />
parts at one time (no exceptions). Sorry, personal<br />
checks do not qualify for discount (certified funds only).<br />
C.O.D. orders are not eligible for discounts either.<br />
Special Note:<br />
Volume Discount pricing cannot be used in conjunction<br />
with any other special promotions, sales, or discounts!<br />
TRUCK FREIGHT AND OVERSIZED FedEx GROUND<br />
ITEMS NOT FREIGHT FREE.<br />
General Information<br />
Credit Cards<br />
You may place your order using VISA, MASTERCARD,<br />
AMERICAN EXPRESS, or DISCOVER. When placing<br />
your credit card order, be sure to include your name as<br />
it appears on the card, the entire card number, the<br />
date of expiration, and the security code located on the<br />
back of VISA, MasterCard, Discover and the front of<br />
American Express. IMPORTANT: We must be able to<br />
verify the shipping address as the credit card holder’s.<br />
Minimum credit card purchase is $20.00.<br />
Money Orders & Cashier’s Check<br />
Money orders, cashier’s check and certified checks are<br />
accepted. On pre-paid mail orders, this is the fastest<br />
method of insuring that your order is processed as<br />
quickly as possible, usually within 24 hours.<br />
Personal Checks<br />
To use a personal check or business check on pre-paid<br />
orders, the name, address, and check number must be<br />
pre-printed on the check. Only first party checks will be<br />
accepted. All orders paid by personal check are held 20<br />
business days pending check clearance. If you are<br />
mailing your order and need the parts in a hurry, we<br />
recommend sending a money order, cashier’s check,<br />
or paying by any of the major credit cards that we accept.<br />
Prices<br />
The prices in this catalog were in effect at the time of printing, and<br />
supersede all prices in any previous OPG publication. OPG reserves<br />
the right to change prices without notice. Availability of all parts and<br />
accessories in this catalog subject to change without notice. OPG<br />
reserves the right to discontinue products, services, and accessories<br />
without notice.<br />
Back Orders<br />
Many items in our giant inventory move quickly, and rarely are we out<br />
of stock on any items for any length of time. Over 90% of all items that<br />
are out of stock at the time you place your original order are in within<br />
5 days. We maintain a sophisticated back order tracking system in our<br />
computer that automatically ships any items due to you when they become<br />
available. Normally, back orders take as little as 5 days to receive, but can<br />
take as much as 30 days. For an estimated time of arrival, call our<br />
customer service department at 1-800-243-8355.<br />
Sales Tax Information<br />
Orders outside California are exempt from California State Sales Tax at<br />
the time of this printing. California residents are required to add sales tax.<br />
Due to the periodic unforeseen changes in the California Sales Tax and<br />
Federal Interstate Tax System, rates are subject to change. The current<br />
California State Sales Tax at the time of this printing is 7-3/4 %.<br />
*See our Ordering and Shipping Information page in the back of this catalog for shipping information, merchandise return policy, and important additional <strong>Original</strong> <strong>Parts</strong> <strong>Group</strong> policies.
Icon References<br />
Reproductions Manufactured in-house<br />
by <strong>Original</strong> <strong>Parts</strong> <strong>Group</strong>.<br />
Your satisfaction 100% Guaranteed!<br />
We have added hundreds of new products for 2003.<br />
From interior products to quality steel reproductions and<br />
everything in between! Throughout the catalog there is<br />
something new for everyone!<br />
There are hundreds of products throughout<br />
this catalog that are either special purchases from the<br />
manufacturer, overstocked in our warehouse, or loss<br />
leaders. Whatever the reason, our sale merchandise is<br />
still the best you can get at rock bottom pricing!<br />
Our made in the USA icon speaks for itself...<br />
American-manufactured products, of course!<br />
In this catalog, the GM Restoration <strong>Parts</strong> Emblem<br />
indicates that a product is officially licensed to<br />
<strong>Original</strong> <strong>Parts</strong> <strong>Group</strong> by General Motors.<br />
All merchandise in this catalog having a trademark or related logo of General<br />
Motors is licensed as necessary pursuant to copyright and trademark laws<br />
under agreements between <strong>Original</strong> <strong>Parts</strong> <strong>Group</strong>’s supplier and General Motors.<br />
Guide, Chevelle, El Camino and the GM RESTORATION PARTS emblems<br />
are trademarks of General Motors Corporation and are used under license to<br />
<strong>Original</strong> parts <strong>Group</strong> Incorporated.<br />
Come In And Visit<br />
Our Brand New<br />
SHOWROOM<br />
Table Of Contents<br />
Interior and soft trim................. 4-71<br />
Weatherstripping.................... 72-76<br />
Emblems and nameplates........ 77-78<br />
Body moldings and trim.......... 79-82<br />
Lamp, lenses and accessories<br />
............................................... 83-85<br />
Door handles, hinges, and<br />
accessories............................... 87-90<br />
Hoods and accessories............ 91-93<br />
Steel and fiberglass body<br />
parts......................................... 94-103<br />
Bumper pads and jacks................. 104<br />
Engine and body decals...... 105-108<br />
Suspension and Components<br />
...........................................<br />
Steering and brakes...........<br />
Fuel and carburetor............<br />
Transmission and clutch...........<br />
Batteries and accessories....<br />
Ignition, wiring, and electrical<br />
........................................... 187-203<br />
Nitrous systems and components<br />
........................................... 204-211<br />
Engine, components, and<br />
accessories........................ 212-291<br />
Cooling and air conditioning<br />
...........................................<br />
Exhaust components.........<br />
Washer/wipers...................<br />
Wheels and tires................<br />
Tools and welding supplies<br />
...........................................<br />
Bolts, clips, and fasteners.....<br />
Keys, lock sets....................<br />
109-125<br />
126-137<br />
138-168<br />
169-182<br />
183-186<br />
292-302<br />
303-312<br />
313-314<br />
315-325<br />
326-345<br />
346-349<br />
350-351<br />
Car covers and masks............... 352<br />
Wash/wax supplies............. 353-358<br />
Paint and rust treatment..... 359-367<br />
License plates, gifts, apparel<br />
........................................... 368-402<br />
Videos and literature........... 403-422<br />
Order Blanks & Shipping Policy in Back of Catalog
<strong>Wiring</strong> Components<br />
Coil & Bracket With Ballast<br />
Resistor<br />
1970-76 Ignition Switches<br />
C990044<br />
$29.95<br />
Coil to be used on ignitions using breaker points and must be used with<br />
proper ballast resistor connected in series with the coil to switch lead.<br />
Not for HEI. 60,000 volt coil w/bracket and 1.4 ohm ballast resistor<br />
CH22401 .............................................................................. KIT 29.95<br />
1970-77 Ignition Coil<br />
Factory replacement<br />
$16.95<br />
Factory replacement column-mounted ignition switch for tilt and non-tilt steering.<br />
C990044 70-76 w/tilt (on column)............................................. each 16.95<br />
GTZ0019 70-76 w/o tilt (on column).......................................... each 16.95<br />
Ignition Coil Bracket<br />
Quality replacement<br />
$24.95<br />
PPR1847<br />
This is the bracket that mounts to the rear of the intake manifold and holds the<br />
ignition coil in place. Pinch screw included with each bracket.<br />
PPR1847 70-74 bracket (all)..................................................... each 24.95<br />
1970-77 Internal Regulator<br />
Conversion Kit<br />
Convert your external<br />
regulator to internal<br />
$21.95<br />
Factory original-type coil for use with breaker points distributors.<br />
6153398 70-77 w/o HEI replacement............................... each 21.95<br />
$18.95<br />
This harness is necessary when converting to an internal regulated alternator.<br />
27555 70-77 ........................................................................ each 18.95<br />
187
<strong>Wiring</strong> Components<br />
<strong>Original</strong> Equipment Wire <strong>Harness</strong><br />
Tape<br />
Horn Kits<br />
$11.95<br />
This is NOT the typical electrical tape you can buy anywhere. This is the<br />
original "hard-to-find" Chevy black "non-stick" tape designed to re-wrap old<br />
wiring harnesses for the factory fresh look. Flame-retardant, UL listed,<br />
1-1/4" X 108’.<br />
WR16133 ............................................................................. each 11.95<br />
Horn Relay<br />
STARTING AT<br />
$9.95<br />
Horn relays refresh charging system security and sharpen engine<br />
compartment detail.<br />
TRD1756 70-71 all.............................................................. each 52.95<br />
T344813 74-75 all.............................................................. each 9.95<br />
TRD1776 76-77 all.............................................................. each 12.95<br />
$24.95<br />
These kits are direct replacements that come from AC Delco, includes all<br />
mounting hardware.<br />
PP00284 70-77 high note................................................... each 24.95<br />
PP00283 70-77 "D" note..................................................... each 24.95<br />
PP00285 70-77 low note..................................................... each 24.95<br />
1970-77 Glove Box Lamp Kit<br />
$12.95<br />
Kit consists of terminal connector, wire, lamp socket and bulb. Plugs directly<br />
into original connector.<br />
GL10950 70-77 ................................................................. each 12.95<br />
1970-77 Tar Fabric Loom Tape<br />
Used on all wiring<br />
$11.95<br />
This kit contains the original tar-like wire cover material used in various places<br />
on your wire harness. Commonly used on temperature sending wires, oil pressure<br />
wires, etc.. this will add the finishing touch to your wire harness detail.<br />
Kit includes 3’ lengths of 5/16", 3/8", and 7/16".<br />
KR00511 70-77 .................................................................. set 11.95<br />
188
Painless <strong>Wiring</strong><br />
Painless 12-Circuit & 18-Circuit <strong>Wiring</strong> <strong>Harness</strong>es<br />
Painless wiring is simply the highest quality wire you can buy! All Painless<br />
harnesses use thermal cross-linked (TXL) high temperature wire. TXL wire has twice<br />
the voltage rating of standard general purpose (GTP) wire and can withstand<br />
temperatures up to 275 degrees. It delivers performance on<br />
demand in high-performance applications. Plus, it will not kink<br />
and is abrasion resistant, making it much easier to route.<br />
Painless also utilizes OEM-style fuse blocks that<br />
feature easy-to-find modern blade fuses, clearly<br />
labeled circuits, and corrosion resistant<br />
construction. With Painless wiring, each wire is<br />
pre-printed with the application so<br />
you know right where it goes.<br />
With Painless, you're simply<br />
investing in the best!<br />
STARTING AT<br />
$281.95<br />
12-Circuit: All kits come with more than enough wire and terminals etc. to do the job. You cut and route to suit your needs.<br />
S210120 GM keyed column w/signal (Painless # 10101).................................................................................................................................... each 299.95<br />
18-Circuit: All kits come with more than enough wire and terminals.<br />
S210201 GM keyed column ignition w/sig (Painless # 10201)............................................................................................................................ each 329.95<br />
Painless 18-Circuit GM Musclecar <strong>Wiring</strong> <strong>Harness</strong><br />
Painless brand harnesses utilize<br />
a unique thermal cross-linked<br />
(TXL) high- temperature wire that<br />
sets the industry standard. The<br />
big plus here, is that TXL wire<br />
has twice the voltage rating of<br />
standard general purpose wire<br />
(GTP) and can withstand much<br />
higher temperatures (up to 275<br />
degrees). Perfect for highperformance<br />
applications!<br />
Painless wiring will not kink, and<br />
it's abrasion resistant, so your<br />
routing will be a snap.<br />
$423.95<br />
Works with factory locations. Easy to install, factory original, quick connect terminals included for the in-dash printed circuit board.<br />
Pre-terminated plugs for the ignition & turn signal switches.<br />
S220102 (Painless # 20102)............................................................................................................................................................................... each 432.95<br />
189
Painless <strong>Wiring</strong><br />
Painless Quick Disconnect<br />
Alternator Lead<br />
Painless Remote Starter Solenoid<br />
$17.95<br />
Makes engine swaps or alternator swaps easy. Can be used on even the<br />
highest output alternators. Comes with pre-wired pigtail and mating plug.<br />
S240110 (Painless # 40110).............................................. each 17.95<br />
Painless Courtesy Light Kit<br />
Light up your interior.<br />
$31.95<br />
Allows you to position the starter solenoid any place you need to in order to<br />
make your installation correct. Comes with plenty of extra wire & connectors<br />
to do the job right.<br />
S230203 (Painless # 30203)................................................ each 31.95<br />
Painless Circuit Fuse Blocks<br />
Fits any application.<br />
$29.95<br />
Kit includes door switches, wire & light sockets to install courtesy lights inside<br />
your vehicle.<br />
S230702 (Painless # 30702).............................................. each 29.95<br />
Painless Hot Shot<br />
Give your starter a boost.<br />
STARTING AT<br />
$92.95<br />
This is the most important feature of a Painless chassis harness. These fuse<br />
blocks feature easy-to-find, modern blade-type fuses, clearly labeled circuits,<br />
corrosion resistant construction and a compact design.<br />
CH22470 12 - circuit (Painless # 30001)............................ each 92.95<br />
CH22471 18 - circuit (Painless # 30003)............................ each 149.95<br />
Painless <strong>Wiring</strong> Neutral<br />
Safety/Backup Light Switch<br />
Easy to mount and hookup.<br />
$29.95<br />
Designed to overcome starting problems due to an overheating GM-style<br />
starter or worn-out electrical system. Works by boosting amperage to the<br />
starter solenoid.<br />
S230202 (Painless # 30202).............................................. each 29.95<br />
NOTE: Easy to install.<br />
$48.95<br />
This kit can either be used as a neutral safety switch or a backup light switch.<br />
The kit contains all the necessary brackets and triggers to work either function<br />
on TH350, TH400, & 700-R4 transmissions.<br />
CH24823 (Painless # 80175)............................................. KIT 48.95<br />
190
<strong>Wiring</strong> <strong>Harness</strong>es<br />
1970-75 Engine <strong>Harness</strong><br />
STARTING AT<br />
$129.95<br />
This harness is one of two (the other being the forward lamp harness) located<br />
in the engine compartment. It includes the wiring for the solenoid, motor,<br />
heater blower, coil, tachometer, wiper motor, oil pressure light, brake<br />
warning lights.<br />
15085 70 6-cylinder, manual trans............... each 145.00 129.95<br />
14695 70 6-cylinder, auto trans.................... each 145.00 129.95<br />
15090 70 V8, manual trans.......................... each 145.00 129.95<br />
14700 70 V8, automatic trans...................... each 145.00 129.95<br />
15095 70 396-454 manual trans.................. each 145.00 129.95<br />
15100 70 396-454 auto trans....................... each 155.00 134.95<br />
17635 71 6-cylinder, manual trans............... each 155.00 129.55<br />
17640 71 6-cylinder, auto trans.................... each 155.00 129.95<br />
17455 71 V8, manual trans.......................... each 155.00 144.95<br />
17435 71 V8, auto trans............................... each 155.00 144.95<br />
17440 71 V8 w/turbo 400 auto trans............ each 155.00 144.95<br />
17450 71 396-454 manual trans.................. each 155.00 144.95<br />
17445 71 396-454 auto trans....................... each 155.00 144.95<br />
16430 72 6-cylinder...................................... each 155.00 139.95<br />
16435 72 V8................................................. each 155.00 139.95<br />
17490 72 V8 w/turbo 400 auto trans............ each 155.00 149.95<br />
16450 72 V8 w/gauges................................ each 155.00 139.95<br />
17645 72 V8 w/turbo 400 auto & gauges..... each 155.00 149.95<br />
17425 72 396-454 manual trans.................. each 155.00 149.95<br />
17430 72 396-454 auto trans....................... each 155.00 149.95<br />
17420 72 396-454 manual trans w/gauges.. each 155.00 149.95<br />
17415 72 396-454 auto trans w/gauges....... each 155.00 149.95<br />
17015 73 6-cylinder w/warning lights........... each 155.00 149.95<br />
15500 73 V8 w/warning lights...................... each 155.00 149.95<br />
15505 73 V8 w/gauges................................ each 155.00 149.95<br />
16565 73 V8 w/TH400 & warning lights....... each 155.00 149.95<br />
16570 73 V8 w/TH400 & gauges................. each 155.00 149.95<br />
19010 73-74 396 & 454 w/at & warn lts............ each 165.00 159.95<br />
19005 73-74 396 & 454 w/mt & warn lts........... each 165.00 159.95<br />
19020 73-74 396 & 454 w/at & gauges............. each 165.00 159.95<br />
19015 73-74 396 & 454 w/mt & gauges............ each 165.00 159.95<br />
16595 74 6-cylinder w/warning lights........... each 155.00 149.95<br />
22605 74 V8 w/at & warning lights............... each 155.00 149.95<br />
22590 74 V8 w/at & gauges......................... each 155.00 149.95<br />
22610 74 V8 w/mt & warning lights.............. each 155.00 149.95<br />
22595 74 V8 w/mt & gauges........................ each 155.00 149.95<br />
18615 75 6-cyl exc. integrated cyl head....... each 155.00 149.95<br />
18610 75 6-cyl w/integrated cyl head........... each 155.00 149.95<br />
18680 75 V8 w/HEI exc. TH400................... each 155.00 149.95<br />
19045 75 V8 w/TH400 & HEI....................... each 155.00 149.95<br />
IMPORTANT: These harnesses are made to order and may require up to<br />
8 weeks delivery time. No COD orders accepted.<br />
Rear Lamp Intermediate <strong>Harness</strong><br />
STARTING AT<br />
$69.95<br />
17715 70-71 Coupe........................................................ each 74.95<br />
17716 72 coupe, w/o seat belt warning..................... each 69.95<br />
36412 72 Coupe, w/seat belt warning....................... each 69.95<br />
Forward Lamp <strong>Harness</strong><br />
STARTING AT<br />
$27.95<br />
This harness is located in the engine compartment and covers the wiring for<br />
the headlights, battery, park lamps, side marker lamps, horn, alternator,<br />
temp, sensor and amps gauge. IMPORTANT: These harnesses are made to<br />
order and may require up to 8 weeks delivery time. No C.O.D. orders accepted,<br />
this item must be pre-paid.<br />
15165 70 V8 w/warning lights...................................... each 149.95<br />
15010 70 V8 w/warning lights & AC............................. each 149.95<br />
17650 70 V8 all w/gauges............................................ each 149.95<br />
17475 71 V8 w/warning lights...................................... each 149.95<br />
17480 71 V8 w/warning lights & AC............................. each 149.95<br />
17470 71 V8 all w/ gauges........................................... each 149.95<br />
18540 71 Forward park & marker lamp ext.................. each 27.95<br />
16460 72 All................................................................. each 149.95<br />
NOTE: 18540 requires two per car.<br />
Rear Lamp <strong>Harness</strong><br />
$124.95<br />
This harness is found inside the trunk. It carries the operations for the<br />
brake lamps, tail lights and backup lamp harness. IMPORTANT: These<br />
harnesses are made to order and may require up to 8 weeks delivery time.<br />
No C.O.D. orders accepted, this item must be pre-paid.<br />
34005 70-72 .................................................................. each 124.95<br />
191
<strong>Wiring</strong> <strong>Harness</strong><br />
Reproduction Dash - Instrument<br />
Panel <strong>Harness</strong><br />
Underdash Courtesy Lamps<br />
Mounting Bracket<br />
STARTING AT<br />
$6.95<br />
STARTING AT<br />
$134.95<br />
This complete assembly provides wiring for all instrumentation and under<br />
dash functional wiring. Fuse block, heater control, interior console lighting (if<br />
applicable), steering column controls and air conditioning controls where<br />
applicable. IMPORTANT: These harnesses are made to order and may<br />
require up to 8 weeks delivery time. Sorry, no C.O.D. orders accepted, this<br />
item must be pre-paid.<br />
14720 70 All, sweep gauge type..................................... each 424.95<br />
15075 70 All, round-gauge type...................................... each 424.95<br />
15065 70 All,rnd gauge type w/SS gauges..................... each 424.95<br />
16290 71 All, sweep-gauge type w/warning lights.......... each 424.95<br />
15265 71 All, round-gauge type...................................... each 424.95<br />
15270 71 All,round-gauge type w/SS gaug..................... each 424.95<br />
17405 72 All, sweep-gauge type..................................... each 424.95<br />
16985 72 All, sweep gauge w/seat belt w....................... each 424.95<br />
16420 72 All, round-gauge type w/warning lights............ each 424.95<br />
16505 72 All, round-gauge w/seat belt w........................ each 424.95<br />
16425 72 All, round-gauge type w/SS gauges................ each 424.95<br />
16510 72 see note 2........................................................ each 424.95<br />
15490 73 Lower half w/gauges w/fuse box..................... each 424.95<br />
15495 73 Upper half w/gauges........................................ each 134.95<br />
20740 74 W/gauges........................................................ each 449.95<br />
NOTE: 20740 has air conditioning wiring incorporated into harness.<br />
NOTE:2 16510 All, round-gauge w/SS gauge & SBW lights<br />
AIR CONDITIONING HARNESS<br />
This harness provides wiring for air conditioning relays and compressor in<br />
the engine compartment. IMPORTANT: These harnesses are made to order<br />
and may require up to 8 weeks delivery time. Sorry, no C.O.D. orders<br />
accepted, this item must be pre-paid.<br />
14965 70 .................................................. each 120.00 109.95<br />
15440 71 .................................................. each 120.00 109.95<br />
16465 72 .................................................. each 120.00 109.95<br />
AIR CONDITIONING POWER FEED WIRE<br />
Applications:<br />
10970: 1970-71 horn relay to AC fuse,<br />
16405: 1972 horn relay to AC fuse, all<br />
28545 70-71 ............................................................. each 14.95<br />
16405 72 ............................................................. each 15.95<br />
KICKDOWN HARNESS<br />
17565 70-72 With Turbo 400 auto trans...... each 39.95 21.95<br />
NOTE: <strong>Harness</strong> #17565 is the switch to engine harness.<br />
CONSOLE HARNESS<br />
11915 70-72 Manual trans.......................... each 35.00 19.95<br />
11925 70-72 Automatic trans...................... each 59.00 39.95<br />
CONSOLE EXTENSION HARNESS<br />
11920 70-72 Manual trans........................... each 59.00 19.95<br />
28190 70-72 Automatic trans.................................... each 39.95<br />
COURTESY LAMP HARNESS<br />
28950 70 Under dash.......................................... each 29.95<br />
30205 70-72 Center roof mounted dome lamp......... each 15.95<br />
15295 71-72 Under dash.......................................... each 27.95<br />
Left or right side, 2 required per car.<br />
4876930 70 ................................................................... each 6.95<br />
CRUISE CONTROL HARNESS<br />
13185 70-72 ............................................................ each 79.00 49.95<br />
CLOCK HARNESS<br />
18600 70-72 Dash mount clock w/sweep speed............. each 13.95<br />
IDLE STOP SOLENOID WIRE<br />
All V8, except big-block with manual transmission.<br />
17495 70 .................................................................... each 10.95<br />
REAR WINDOW DEFROSTER HARNESS<br />
14555 70-72 ................................................................... each 39.95<br />
WIPER MOTOR HARNESS<br />
28255 70 Electro-tip demand wipers.......................... each 33.95<br />
POWER TOP HARNESS<br />
Convertible, under dash.<br />
35715 70 Switch-to-intermediate body ha.................. each 49.95<br />
POWER ACCESSORY FEED WIRE<br />
28220 70-71 Horn relay-to-circuit breaker,...................... each 10.95<br />
28215 70-72 Circuit breaker-to-main harnes................... each 10.95<br />
36861 70-72 Circuit breaker-to-main harnes................... each 14.95<br />
NOTE: 28215 used with one power option only (1 cavity connector), windows or<br />
seats or top. 36861 used with multiple power options (3 cavity connector),<br />
windows, seats and/or top.<br />
T.C.S. JUMPER WIRE, ENGINE HARNESS<br />
To passenger side temp sending unit, with gauges or AC only.<br />
17740 71 .................................................................... each 9.95<br />
T.C.S. TRANSMISSION SWITCH EXTENSION<br />
Manual transmission, from engine harness-to-transmission switch.<br />
17365 72 (*)................................................................ each 29.00<br />
17355 73 (**).............................................................. each 29.00<br />
*Used with #16430, #16435 & #16450 engine harnesses. **Used with #15500 &<br />
#15505 engine harnesses.<br />
Factory Tachometer Printed<br />
Circuit Board<br />
STARTING AT<br />
$89.95<br />
KR01021 70-72 w/o factory gauges...................................... each 89.95<br />
PZ50021 70-72 w/ factory gauges......................................... each 99.00<br />
192
Spark Plug Wires<br />
1970-72 Braided Ground Straps<br />
Taylor Thunder Volt 50 Race Fit<br />
Spark Plug Wire Sets<br />
$119.95<br />
$18.00<br />
These are high-quality reproductions of the straps that ground the engine to<br />
the frame and the frame to the body.<br />
M1240TC 70-72 ...................................................................... set 18.00<br />
NOTE: These also come with the bolts that screw them in and a complete<br />
diagram highlighting the correct location of each strap.<br />
Taylor 8MM Spiro Pro-Race<br />
Fit Wire Sets<br />
Taylor Cable has crafted the finest racing ignition wire available. It has the their<br />
lowest resistance wire, 50 ohms, +/- 20%, per foot. The 10.4mm wire has<br />
102,000 volt dielectric strength and has continuous heat protection of up to<br />
600-degrees Fahrenheit. The Thunder Volt 50 wire has three layers of 100%<br />
Zimplex silicone along with a ferrite spiral-wound coated core blended of an<br />
exclusive copper-nickel alloy and a heat-treated tightly wound fiberglass braid,<br />
so no sleeving is required. Taylor uses 100% silicone plug boots with a<br />
vibration-proof double spring locking spark plug terminal. Available in black with<br />
gold lettering only. Get the ultimate in spark plug wires, Taylor Thunder Volt 50.<br />
CH25579 SB over VC/socket 90 (Taylor# 98027)................ set 119.95<br />
CH25580 SB over VC/HEI 90 (Taylor# 98028).................... set 119.95<br />
CH25581 SB under headers/socket 90 (Taylor# 98029)...... set 119.95<br />
CH25582 SB under headers/HEI 90 (Taylor# 98030).......... set 119.95<br />
CH25583 BB over VC/socket 135 (Taylor# 98031).............. set 119.95<br />
CH25584 BB over VC/HEI 135(Taylor# 98032)................... set 119.95<br />
CH25585 BB under headers/socket 90 (Taylor# 98001)...... set 119.95<br />
CH25586 BB under headers/HEI 90 (Taylor# 98002).......... set 119.95<br />
Taylor "409" Pro-Race Wire Sets<br />
$54.95<br />
Taylor Spiro Pro 8mm spark plug wires have a high conductivity resistor<br />
conductor spiral wound with a stainless steel wire for more power through the<br />
wire and to the plug. They have 10 times less resistance than standard wires<br />
and this helps eliminate electronic interference to radios, ignitions & computer<br />
-controlled devices. Spiro Pro wires use two layers of 100% silicone on the<br />
outside with a temperature rating of 600-degrees without additional sleeving,<br />
the highest on the market. The spark plug boots are low profile and have<br />
double spring lock spark plug terminals.<br />
CH25588 SB over VC/socket 90 (black) (Taylor# 76027)......... set 54.95<br />
CH25589 SB over VC/HEI 90 (black) (Taylor# 76028).............. set 54.95<br />
CH25590 SB under headers/socket 90 (black) (Taylor# 76029) set 54.95<br />
CH25591 SB under headers/HEI 90 (black) (Taylor# 76030).... set 54.95<br />
CH25592 BB over VC/socket 135 (black) (Taylor# 76031)........ set 54.95<br />
CH25593 BB over VC/HEI 135 (black) (Taylor# 76032)............ set 54.95<br />
CH25594 BB under headers/socket 90 (black) (Taylor# 76001) set 54.95<br />
CH25595 BB under headers/HEI 90 (black) (Taylor# 76002).... set 54.95<br />
CH25596 SB over VC/socket 90 (red) (Taylor# 76227)............. set 54.95<br />
CH25597 SB over VC/HEI 90 (red) (Taylor# 76228)................. set 54.95<br />
CH25598 SB under headers/socket 90 (red) (Taylor# 76229)... set 54.95<br />
CH25599 SB under headers/HEI 90 (red) (Taylor# 76230)....... set 54.95<br />
CH25601 BB over VC/socket 135 (red) (Taylor# 76231)........... set 54.95<br />
CH25602 BB over VC/HEI 135 (red) (Taylor# 76232)............... set 54.95<br />
CH25603 BB under headers/socket 90 (red) (Taylor# 76201)... set 54.95<br />
CH25604 BB under headers/HEI 90 (red) (Taylor# 76202)....... set 54.95<br />
CH25605 SB over VC/socket 90 (blue) (Taylor# 76627)........... set 54.95<br />
CH25606 SB over VC/HEI 90 (blue) (Taylor# 76628)................ set 54.95<br />
CH25607 SB under headers/socket 90 (blue) (Taylor# 76629). set 54.95<br />
CH25608 SB under headers/HEI 90 (blue) (Taylor# 76630)..... set 54.95<br />
CH25609 BB over VC/socket 135 (blue) (Taylor# 76631)......... set 54.95<br />
CH25610 BB over VC/HEI 135 (blue) (Taylor# 76632).............. set 54.95<br />
CH25611 BB under headers/socket 90 (blue) (Taylor# 76601). set 54.95<br />
CH25612 BB under headers/HEI 90 (blue) (Taylor# 76602)..... set 54.95<br />
$108.95<br />
Taylor "409" Pro Race ignition wire sets provide continuous heat protection<br />
up to 600-degrees Fahrenheit and have 102,000 volt dielectric strength.<br />
Heat-treated, tightly woven fiberglass braid is applied over the spiro wound<br />
conductor, which is then wound with stainless steel wire for RFI (Radio<br />
Frequency Interference) suppression. This conductor/wire combination has<br />
10 times less resistance than standard suppression wires. This enables<br />
electronic ignitions, on-board computers, and cell phones to function properly.<br />
For reliable street or track performance, you can count on Taylor "409" Pro<br />
Race spark plug wires.<br />
CH25551 SB over VC/socket 90 (black) (Taylor# 79027).......... set 108.95<br />
CH25552 SB over VC/HEI 90 (black) (Taylor# 79028).............. set 108.95<br />
CH25553 SB under headers/socket 90 (black) (Taylor# 79029) set 108.95<br />
CH25554 SB under headers/HEI 90 (black) (Taylor# 79030)... set 108.95<br />
CH25555 BB over VC/socket 135 (black) (Taylor# 79031)....... set 108.95<br />
CH25556 BB over VC/HEI 135 (black) (Taylor# 79032)........... set 108.95<br />
CH25557 BB under headers/socket 90 (black) (Taylor# 79001) set 108.95<br />
CH25558 BB under headers/HEI 90 (black) (Taylor# 79012)... set 108.95<br />
CH25559 SB over VC/socket 90 (red) (Taylor# 79227)............ set 108.95<br />
CH25560 SB over VC/HEI 90 (red) (Taylor# 79228)................. set 108.95<br />
CH25561 SB under headers/socket 90 (red) (Taylor# 79229).. set 108.95<br />
CH25562 SB under headers/HEI 90 (red) (Taylor# 79230)...... set 108.95<br />
CH25563 BB over VC/socket 135 (red) (Taylor# 79231).......... set 108.95<br />
CH25564 BB over VC/HEI 135 (red) (Taylor# 79232)............... set 108.95<br />
CH25565 BB under headers/socket 90 (red) (Taylor# 79201).. set 108.95<br />
CH25566 BB under headers/HEI 90 (red) (Taylor# 79202)....... set 108.95<br />
CH25567 SB over VC/socket 90 (blue) (Taylor# 79627)........... set 108.95<br />
CH25568 SB over VC/HEI 90 (blue)(Taylor# 79628)................ set 108.95<br />
CH25569 SB under headers/socket 90 (blue) (Taylor# 79629). set 108.95<br />
CH25570 SB under headers/HEI 90 (blue) (Taylor# 79630)..... set 108.95<br />
CH25571 BB over VC/socket 135 (blue) (Taylor# 79631)......... set 108.95<br />
CH25572 BB over VC/HEI 135 (blue) (Taylor# 79632).............. set 108.95<br />
CH25573 BB under headers/socket 90 (blue) (Taylor# 79601). set 108.95<br />
CH25574 BB under headers/HEI 90 (blue) (Taylor# 79602)...... set 108.95<br />
193
Spark Plug Wires<br />
1970-72 <strong>Original</strong> Date Coded<br />
Spark Plug Wire Sets<br />
GM Performance Spark<br />
Plug Wires<br />
High-performance<br />
Big-block or small-block<br />
$64.95<br />
These are original "Packard Electric" spark plug wires identical to the ones<br />
GM used for original equipment. They feature original-style molded rubber<br />
boots and are date-coded for a complete, factory fresh appearance.<br />
1230693 70 (early) small block........................................ each 64.95<br />
1230701 70 (late) small block.......................................... each 64.95<br />
1310693 70 (early) big block........................................... each 64.95<br />
1310701 70 (late) big block............................................. each 64.95<br />
1230703 71 (early) small block........................................ each 64.95<br />
1230711 71 (late) small block.......................................... each 64.95<br />
1230713 72 (early) small block........................................ each 64.95<br />
1230721 72 (late) small block.......................................... each 64.95<br />
1310703 71 (early) big block........................................... each 64.95<br />
1310711 71 (late) big block............................................. each 64.95<br />
1312713 72 (early) big block........................................... each 64.95<br />
1312721 72 (late) big block............................................. each 64.95<br />
NOTE: Cars built during February (of the model yr) or later are considered late style.<br />
MSD 8.5MM Super Conductor<br />
Spark Plug Wire Set<br />
$124.95<br />
These performance wires are made for rear mounted distributors. These are<br />
8mm red cables with contrasting white logos and black boots. Double wall<br />
silicone construction, silicone boots and 600 ohms per foot resistance. Includes<br />
10" coil lead and four wire separators.<br />
CH20214 SB - Bow Tie........................................................... set 124.95<br />
CH20215 BB - Bow Tie........................................................... set 124.95<br />
CH20216 SB - GM Performance............................................ set 124.95<br />
CH20217 BB - GM Performance............................................ set 124.95<br />
1970-77 Pertronix Spark<br />
Plug Wires<br />
STARTING AT<br />
$76.95<br />
Set includes terminals for engines with early and late-type distributor caps.<br />
Straight & 90-degree boots & terminals factory installed on one end.<br />
CH20101 90 degree/90 degree (red) (MSD# 31239)............. set 79.95<br />
C200201 90 degree/straight (red) (MSD# 31199)................. set 76.95<br />
CH24969 90 degree/straight (black) (MSD # 31233)............. set 89.95<br />
CH24970 90 degree/90 degree (black) (MSD # 31223)........ set 79.95<br />
$44.95<br />
New from Pertronix are these 8mm, 90-degree & 90-degree/ straight spark<br />
plug wire sets. Made for all V8 engines.<br />
L201261 70-77 black 90 degree (Pertronix # 808290)........ set 44.95<br />
L201262 70-77 blue 90 degree (Pertronix # 808390)......... set 44.95<br />
L201263 70-77 red 90 degree (Pertronix # 808490)........... set 44.95<br />
CH22495 70-77 black 90/straight (Pertronix # 808280)....... set 44.95<br />
CH22496 70-77 blue 90/straight (Pertronix # 808380)......... set 44.95<br />
CH22497 70-77 red 90/straight (Pertronix # 808480).......... set 44.95<br />
194
Spark Plug Accessories<br />
MSD Short HEI Boot Set<br />
Taylor Spiro-Pro/.409 Strip<br />
& Crimp Tool<br />
$12.95<br />
A complete set of high temp. boots and locking dual crimp terminals for your<br />
custom wire set.<br />
CH22389 (MSD # 8848).......................................................... set 12.95<br />
Taylor Spark Plug & Coil Wire<br />
Repair Kit<br />
$12.95<br />
A must when stripping Spiro-Pro wires. Cuts just the right amount of wire<br />
insulation, without damaging the Spiro-Wound conductor. Crimps terminals<br />
with aid of bench vise. For 8mm/10.4mm sizes.<br />
CH25587 (Taylor # 43395)................................................... each 12.95<br />
Taylor Pro Multiple Purpose<br />
Wire Tool<br />
STARTING AT<br />
$9.95<br />
Taylor cable makes it easy to replace or repair one spark plug or coil wire<br />
at a time. Available for the extra large 10.4mm diameter wire and the 8mm<br />
wire, these repair kits are available in several colors. Spark plug wire kits have<br />
a 90-degree boot on one end and a 180-degree boot on the other and they<br />
HEI end and the wire is 36" long. These kits make repair a single wire very<br />
easy and cost-effective.<br />
CH38300 available colors: Black, blue, or red.<br />
CH38400 available colors: Black, blue, red, or yellow.<br />
CH38300 "409" 10.4mm Spiro-Wound.................................... KIT 22.95<br />
CH38400 8mm Spiro-Pro 90/180............................................ KIT 13.95<br />
CH38800 coil wire (409).......................................................... KIT 13.95<br />
CH38900 coil wire (8mm)........................................................ KIT 9.95<br />
Taylor Convoluted Tubing<br />
$13.95<br />
Made of high carbon steel, cuts and strips automotive primary wire (10-22<br />
gauge), crimps insulated and non-insulated solderless terminals. Crimps<br />
7-8m spark plug wire ends.<br />
CH25578 (Taylor # 43390)................................................... each 13.95<br />
Taylor Spark Plug Boot<br />
Removal Tool<br />
$13.95<br />
These packages come with multiple sizes per package (1-1/4", 1-3/8", 1-1/2"<br />
1-3/4"). Each size is a 10 ft. roll. Made of flexible polyethylene tubing,<br />
they protect wires from abrasions and heat.<br />
Colors available: Black, blue, purple, red, teal, white, or yellow.<br />
CH38500 ................................................................................. set 13.95<br />
$11.95<br />
Removes wires from plugs without damaging wire and plug boots.<br />
Prevent burns to fingers.<br />
CH25577 (Taylor # 43392)................................................... each 11.95<br />
195
Spark Plug Accessories<br />
"Cool It " Thermo-Sleeve<br />
Taylor Clamp-Style Wire<br />
Separators<br />
STARTING AT<br />
$13.95<br />
Lamination of a high-temperature fabric to a highly reflective foil is the<br />
make-up of the thermo-sleeve, which provides protection from radiant heat<br />
for hoses and wires. Thermo-sleeve’s ultra-lightweight construction provides<br />
more insulating than traditional bulky rubber-coated fiberglass. The aluminized<br />
sleeving reflects over 90 percent of radiant heat, and is fire-proof &<br />
oil-resistant.<br />
CH25142 3’ x 1/4" - 1/2"....................................................... each 13.95<br />
CH25143 3" x 5/8" - 1".......................................................... each 15.95<br />
CH25144 3’ x 1-1/8" - 1-1/2"................................................. each 19.95<br />
CH25145 3’ x 1-5/8" - 2"....................................................... each 23.95<br />
CH25146 3’ x 2-1/8" - 2-1/2"................................................. each 25.95<br />
CH25147 12’ x 1/4" - 1/2"..................................................... each 42.95<br />
CH25148 12’ x 5/8" - 1"........................................................ each 54.95<br />
CH25149 12’ x 1-1/8" - 1-1/2"............................................... each 66.95<br />
CH25150 12’ x 1-5/8" - 2"..................................................... each 78.95<br />
CH25151 12’ x 2-1/8" - 2-1/2"............................................... each 90.95<br />
MSD Boot Armor<br />
STARTING AT<br />
$17.95<br />
Separates, organizes, and supports plug wires. Molded from non-conductive<br />
6/6 nylon. Will not melt, mar, distort, crack, or fade. Available in black, blue,<br />
or red.<br />
CH38100 7-8mm...................................................................... set 17.95<br />
CH38200 "409" 10.4mm........................................................... set 21.95<br />
Taylor Clip-On Colored<br />
Wire Separators<br />
$19.95<br />
The ultimate heat protection for your spark plug boots! These stainless steel<br />
sleeves provide a heat shielding armor around the spark plug boot. The 321<br />
stainless material features an embossed pattern for durable strength and is<br />
annealed for forming ease. This resilient material can handle over 2500<br />
degrees making these the best protection you can achieve against exhaust<br />
heat. Includes Dual Crimp Spark Plug terminals, high heat boots and two<br />
Boot Reflectors.<br />
CH24956 90-degree............................................................. pair 19.95<br />
CH24957 135-degree........................................................... pair 19.95<br />
CH24958 straight.................................................................. pair 19.95<br />
MSD Shrink Sleeve With<br />
Numbers<br />
STARTING AT<br />
$8.95<br />
Made of tough nylon that withstands 400 degrees. Each set contains 2 each<br />
of 2-, 3-, and 4-wire separators. CH38600 available colors: Black, blue,<br />
red, or yellow. CH38700 available colors: Black, blue, or red.<br />
CH38600 7-8mm....................................................................... set 8.95<br />
CH38700 "409" 10.4mm........................................................... set 9.95<br />
Universal Spark Plug Wire<br />
Divider Set<br />
$12.95<br />
This sleeving simply slides over the spark plug boot or other connection &<br />
will shrink tightly around it for a secure connection. The sleeves have the<br />
cylinder numbers on them so each wire is clearly marked to prevent any<br />
confusion.<br />
CH24955 .............................................................................. set 12.95<br />
$35.95<br />
This universal spark plug wire divider kit features your choice of a color<br />
aluminum bracket with adjustable mounts to provide fit for a variety of<br />
applications.<br />
C210304 brushed aluminum................................................... pair 35.95<br />
196
Spark Plug Accessories<br />
MSD Pro Crimping Tool<br />
GM HEI Distributor<br />
$54.95<br />
Making plug wires on your own is easy with the MSD Pro Crimping Tool. This<br />
tool provides a "die" to strip either 8mm Heli-Core or 8.5mm Super Conductor<br />
Wire, then it can be used as a vise to provide a solid terminal crimp to the<br />
wire.<br />
CH20326 ............................................................................. each 54.95<br />
Spark Plug Heat Shields<br />
Helps prevent melting plug wires and fouling spark<br />
plugs.<br />
STARTING AT<br />
$34.95<br />
These are the heat shields that cover the spark plug from the extreme heat<br />
of exhaust manifolds. Complete set.<br />
DESPB12 70 Small-block............................................................ 34.95<br />
TWM3130 70-71 Big-block (pictured)............................................... 54.00<br />
Spark Plug Wire Supports<br />
Wire Supports<br />
$289.95<br />
This complete distributor is the same one used in<br />
all GM crate engines with roller cams that are<br />
made of steel. Will not work on "tall" decks and has<br />
melonized cam drive gear.<br />
CH23878 SB/BB....................................................................... each 289.95<br />
MSD Pro-Billet Chevrolet V-8<br />
Distributors<br />
STARTING AT<br />
$229.95<br />
STARTING AT<br />
$7.95<br />
Mounting on the valve cover, these wire supports shield heat from the<br />
manifold. They’re original GM pieces that fit all small-blocks. Now in stock.<br />
87A0058 70 ................................................................ each 19.95<br />
87A0061 70-74 ................................................................ each 7.95<br />
Note: 87A0061 mounts on the right front or left rear of the valve cover.<br />
This is the perfect upgrade for the outdated points distributors or outdated HEI’s.<br />
Made for street driven cars, this system is built around a precision CNC-machined<br />
billet aluminum housing. This ignition system is made to smooth out the idle,<br />
improve starting and provide a much higher rpm range. The Ready-To-Run<br />
features MSD’s adjustable mechanical advance so you can custom tailor an<br />
ignition curve to match engine needs. System is complete, ready to<br />
drop-in and go.<br />
C990110 Use w/blaster 2 coil................................................... each 299.95<br />
C990112 Replacement cap...................................................... each 20.95<br />
G200065 Hi-perf replacement rotor.......................................... each 18.95<br />
CH20418 Use w/6AL box.......................................................... each 229.95<br />
197
MSD<br />
MSD Ready-To-Run Pro-Billet<br />
Distributor Kit<br />
MSD Pro-Billet GM<br />
HEI Distributor<br />
$334.95<br />
This is the perfect upgrade for an outdated points or HEI distributors.<br />
Designed for street driven cars, this system is built around a billet aluminum<br />
housing that is CNC-machined to exact tolerances. An oversized steel shaft is<br />
guided by a sealed ball bearing and an extra-long sintered bushing for high<br />
RPM stability and endurance. Features an easy-to-adjust mechanical advance,<br />
along with a vacuum andvance to dial in performance. Distributor has a<br />
built-in module that provides a much more powerful spark than any stock<br />
HEI. Includes Blaster 2 coil, coil bracket, coil wire, standard distributor cap<br />
and a HEI-style distributor cap.<br />
C990111 70-74 (MSD # 8474)........................................... KIT 334.95<br />
MSD Super HEI Kit<br />
$369.95<br />
MSD engineers created this ignition system to be<br />
capable of running above 9,000 RPM, which is 50%<br />
more current than stock units that lose spark energy at<br />
approximately 4,500 RPM. This unit also delivers a<br />
much more precise timing signal. Features include a<br />
magnetic pickup, billet reluctor, Tuftride-coated shaft<br />
that is guided by a sealed ball bearing and long<br />
sintered bushing, adjustable mechanical advance<br />
assembly, all which is enclosed in a billet aluminum<br />
housing that is CNC-machined. This is a complete set<br />
up, ready to drop in.<br />
C990106 70-74 (MSD # 8365)........................................ each 369.95<br />
C990107 70-74 replacement cap (MSD # 8411)............ each 22.95<br />
C990108 70-74 replacement rotor (MSD # 8410)........... each 5.95<br />
C990109 70-74 replacement coil (MSD # 8225)............. each 79.95<br />
MSD Pro-Billet Chevrolet V-8<br />
Distributors<br />
STARTING AT<br />
$259.95<br />
Both Super HEI kits allow you to remove or bypass the low-powered HEI<br />
module and coil and replace them with the MSD 6A or 6AL ignition control<br />
and the Blaster 2 high output coil. The result is more power, increased RPM<br />
range, easier starting, plus better mileage & performance.<br />
Kit includes: MSD ignition (6A or 6AL), Blaster 2 coil, coil wire,<br />
HEI dust cover & coil bracket. The 6AL has a Soft Touch Rev<br />
Control to protect your engine from over-rev damage.<br />
CH22385 MSD 6A box (MSD # 8400).................................. KIT 259.95<br />
CH22386 MSD 6AL box (MSD # 8500)................................ KIT 299.95<br />
STARTING AT<br />
$229.95<br />
This is the perfect upgrade for outdated points or<br />
HEI distributors. This distributor is built around a billet<br />
aluminum housing that is CNC-machined to exact<br />
tolerances. An oversized steel shaft is guided by a<br />
sealed ball bearing and an extra-long sintered bushing<br />
for high RPM stability and endurance.<br />
C990110 70-74 use w/Blaster 2 coil (MSD# 8360)........ each 299.95<br />
C990112 70-74 replacement cap (MSD# 8437)............. each 20.95<br />
CH20418 70-74 use w/6AL box (MSD# 8361)............... each 229.95<br />
G200065 70-74 hi-perf replacement rotor (MSD# 8467) each 18.95<br />
198
MSD<br />
MSD Ultimate HEI Kit<br />
MSD Blaster 2 Points Coil Kit<br />
$149.95<br />
For use with non-computerized (4-pin module) HEI models only. Rebuild your<br />
GM HEI with MSD performance. Exceptional high-speed coil saturation for full<br />
power, high RPM operation. Matched coil & module produce the highest<br />
voltage and energy. Complete kit with a brass terminal cap, rotor, module,<br />
coil & dust cover.<br />
CH22390 (MSD # 8501)...................................................... KIT 149.95<br />
STARTING AT<br />
$41.95<br />
These coils put out 45,000 volts, 15,000 more than stock. They also have<br />
an oil-filled metal cannister and fit stock brackets. Comes with a ballast<br />
resistor.<br />
CH22383 chrome (MSD # 8200)...................................... KIT 44.95<br />
CH22384 red (MSD # 8203)............................................. KIT 41.95<br />
MSD 6A/6AL Ignition Box<br />
STARTING AT<br />
$179.95<br />
Whether looking for more power or better fuel economy, the MSD 6 or 6AL<br />
will fill the need. This box will work on virtually any vehicle as long as it has<br />
a 12-18 volt electrical system. Get quicker ET’s, easier starts, reduced plug<br />
fouling and better fuel economy. The 6AL system includes Soft Touch Rev<br />
Control to help protect your vehicle in case of missed shifts or driveline failure.<br />
CH20096 MSD 6AL (MSD # 6420)..................................... each 239.95<br />
CH20496 MSD 6A (MSD # 6200)....................................... each 179.95<br />
199
MSD<br />
MSD Digital-6 Plus<br />
Ignition Control<br />
MSD Blaster Ignition Coils<br />
STARTING AT<br />
$31.95<br />
$323.95<br />
The fastest of all digital ignitions. The Digital-6 allows you to switch between<br />
two 100 RPM rotary switch increments. A single stage retard for nitrous and<br />
top-end performance. Start retard eases pressure on the starter, flywheel<br />
& engine. Adjustable magnetic pickup compensation produces accurate<br />
trigger signals. LED display warns of trigger signal problems or faulty<br />
charging system. Fully potted with polyurethane for vibration and water<br />
protection.<br />
CH22391 (MSD # 6520)................................................... each 323.95<br />
MSD Blaster HVC II<br />
MSD Blaster Coils are an upgrade to your stock coil or if you want to<br />
complement the performance of your MSD Ignition. These coils do not include<br />
a ballast resistor. When using an MSD Ignition Control, the ignition is<br />
responsible for delivering the voltage to the coil so a ballast is not necessary.<br />
Ths Blaster 3 Coil features an extra tall tower to improve the coil wire<br />
attachment and spark isolation. Includes 90-degree terminal and boot.<br />
CH20097 Blaster 2 (MSD # 8202)........................................... each 31.95<br />
CH20098 Blaster 3 (MSD # 8223)........................................... each 39.95<br />
MSD Blaster SS Coil<br />
$44.95<br />
The efficient e-core windings are designed to produce high amounts of current<br />
without sacrificing the voltage output. In fact, when used with an MSD 6<br />
series ignition, the Blaster SS produces 300 milliamp with a maximum voltage<br />
output of 40,000 volts.<br />
CH25810 ................................................................................ each 44.95<br />
MSD GM High Energy HEI Module<br />
$119.95<br />
New coil technology to be used with the MSD 6 series line for incredible<br />
voltage and high current. Efficient windings and material produce incredible<br />
voltage. Lightning quick rise time and lengthy spark duration. Windings<br />
are completely potted with a fracture resistant compound for vibration<br />
resistance.<br />
CH25811 (MSD# 8253)..................................................... each 119.95<br />
$74.95<br />
MSD has created a high energy ignition module to replace the stock GM HEI<br />
ignitions with an internal coil. These modules are capable of delivering<br />
sparks up to 9,000 RPM, and hold a more precise and dwell control at high<br />
RPM. It also produces 50% higher coil drive current than the stock module,<br />
which saturates the coil faster and gives you more spark energy at top speeds.<br />
L998364 70-77 .................................................................... each 74.95<br />
200
MSD<br />
MSD Digital Ignition Tester<br />
MSD Self-Powered Timing Light<br />
$156.95<br />
This valuable tool allows you to test your ignition while it’s in the car.<br />
The tester produces a simulated trigger signal that fires the ignition as if<br />
the engine were running. A special load-producing clip-on spark plug is<br />
included to connect the coil wire. If the spark is unable to jump the gap of<br />
the tester, there is an ignition problem and you can trace it. The tester has<br />
an LCD display that will show simulated RPM, so you can test RPM limits,<br />
RPM activated switches, shift light operation and tachometer.<br />
CH20327 70-77 (MSD# 8998).............................................. each 156.95<br />
MSD Distributor Clamps<br />
STARTING AT<br />
$24.95<br />
$179.95<br />
When timing your engine nothing is easier to use than MSD’s self-powered<br />
timing light. The light does not require 12 volts like other lights, it uses six AAA<br />
batteries, which means no wires hanging in your engine compartment.<br />
CH20102 70-77 (MSD# 8212)............................................... each 179.95<br />
MSD Firewall Feed-Thru<br />
MSD’s billet Chevrolet distributor hold down clamp is strong enough to keep<br />
the timing locked in place whether using an MSD Billet or Pro-Mag distributor.<br />
CNC-machined from steel. Each clamp includes mounting stud, lock washer<br />
& nut.<br />
CH22392 Rounded (MSD # 8010).......................................... each 36.95<br />
CH22393 Black standard shape (MSD # 8110)...................... each 24.95<br />
CH22394 Polished standard shape (MSD # 8540).................. each 36.95<br />
$11.99<br />
Your Satisfaction Guaranteed<br />
This handy piece will prevent voltage leaks in the passenger compartment<br />
mounted coil. Molded from Rynite and nylon, it will give you 1/2" of insulation to<br />
ensure the coil’s spark reaches the distributor.<br />
CH20100 70-77 (MSD# 8991).............................................. each 11.99<br />
201
Pertronix<br />
Pertronix "Second Strike"<br />
Ignition Box<br />
Flame Thrower HEI Distributor<br />
By Pertronix<br />
CT20192<br />
M200005<br />
C210031<br />
CT20183<br />
$284.95<br />
Your factory inductive-type ignition is known for its long burn time, but not<br />
necessarily its high energy. Capacitive discharge (CD) ignitions are known for<br />
their high energy, but not long burn time. Pertronix has combined the two with<br />
its "Second Strike" ignition supplement that uses your stock ignition as the<br />
primary spark producer and follows it with a second spark, anywhere from<br />
2-18 crank degrees later, from its "Second Strike" CD box. This assures you<br />
of complete burning of the air/fuel mixture in the combustion chamber. And it<br />
means you can get more power, better combustion efficiency and reduced<br />
plug fouling. The "Second Strike" also has a built-in rev limiter that randomly<br />
cuts out a spark from different cylinders to reduce plug fouling when you over<br />
rev your engine. This ignition supplement works with most OEM and<br />
aftermarket non-CD ignitions and is compatible with most modern tachs<br />
without an interface.<br />
CH25765 ............................................................................ each 284.95<br />
Pertronix "Ignitor" Electronic<br />
Ignition<br />
STARTING AT<br />
$229.95<br />
The Flame Thrower distibutor is built to operate without misfire up to a<br />
minimum of 7500 RPM. Two extra sets of springs are included to help<br />
customize your advance curve for specific motor applications.<br />
CT20181 GM HEI dist. cap/rotor (black) (Pertronix# D4000).......... set 24.95<br />
CT20182 GM HEI dist. cap/rotor (red) (Pertronix# D4001)............. set 24.95<br />
CT20183 HEI dist. cap (black) (Pertronix# D4050)......................... each 21.95<br />
CT20184 HEI dist. cap (red) (Pertronix# D4051)............................ each 21.95<br />
CT20185 HEI rotor (red) (Pertronix# D4061)................................. each 9.95<br />
CT20186 HEI rotor (blue) (Pertronix# D4062)................................ each 9.95<br />
CT20192 GM HEI 50,000 volt coil (red/yellow) (Pertronix# D3000) each 44.95<br />
C210029 Complete distributor (black cap) (Pertronix# D1000)....... each 229.95<br />
C210030 Complete dist. (black cap/machined) (Pertronix# D1050) each 229.95<br />
C210031 Complete distributor (red cap) (pertronix# D1001)......... each 229.95<br />
C210032 Ccomplete dist. (red cap/machined) (Pertronix# D1051) each 229.95<br />
Pertronix Billet Distributor<br />
Powerful spark<br />
CT20186<br />
STARTING AT<br />
$73.95<br />
Ignitor I - Get the performance of an electronic ignition system while retaining<br />
your stock distributor. Test results show twice the voltage to spark plugs,<br />
which increases horsepower, fuel economy and plug life. System fits entirely<br />
inside the distributor. Guaranteed for 30 months.<br />
Ignitor II - Utilizes a powerful new microprocessor that controls the dwell<br />
period, for the best possible spark over the entire RPM range. The electronic<br />
module is a huge step up from your old point-type ignition. It offers you quicker<br />
starting, longer plug-life and increased horsepower. Best of all, you get all<br />
these advantages at a much lower price than those more expensive<br />
"box-type" ignition systems.<br />
CH20137 70-72 Ignitor I..................................................... each 73.95<br />
SK00001 70-72 Ignitor II.................................................... each 105.95<br />
$218.95<br />
The Flame-Thrower billet distributor uses the Ignitor II<br />
electronic module for a more powerful spark and more<br />
stable timing throughout the RPM range.<br />
The Flame-Thrower distributor is compatible with<br />
most coils and comes with a high dielectric strength<br />
cap with brass terminals and a premium rotor.<br />
Completely adjustable with a mechanical advance<br />
limiter and additional advance springs for a custom<br />
curve.<br />
CH24914 Black cap (Pertronix # D100700)......................... each 218.95<br />
CH24915 Red cap (Pertronix # D100701)............................ each 218.95<br />
202
Ignition Accessories<br />
Pertronix High Performance Coils<br />
STARTING AT<br />
$25.95<br />
The "Flame-Thrower" high performance coil<br />
delivers 15% more spark which allows for larger<br />
spark plug gap for added power, smoother<br />
response and better fuel economy. The "Flame<br />
Thrower" delivers a full 40,000 volts. "Flame-<br />
Thrower II" coils maximize energy and reliability<br />
over the full RPM range, enable larger plug gaps<br />
for greater fuel economy and increased power<br />
levels and they’re 50 state legal. These coils are<br />
rated at 45,000 volts and are intended for use with<br />
the Ignitor II ignition system.<br />
CH20139 Flame-Thrower I (chrome) (Pertronix# 40001).... each 27.95<br />
CH20140 Flame-Thrower I (black). (Pertronix# 40011)...... each 25.95<br />
SK00002 Flame-Thrower II (chrome) (Pertronix# 45001)... each 37.99<br />
SK00003 Flame-Thrower II (black) (Pertronix# 45011)...... each 32.99<br />
Pertronix Digital Rev Limiter<br />
ARP Distributor Stud Kit<br />
STARTING AT<br />
$3.95<br />
Make sure you lock your timing into place with ARP’s distributor stud kit. Available<br />
in black oxide or stainless steel, both with vibration resistant J-form threads.<br />
CH20038 black oxide..................................................................... KIT 3.95<br />
CH20039 stainless......................................................................... KIT 5.95<br />
B&B Distributor Clamps<br />
STARTING AT<br />
$9.95<br />
Heavy-duty, precision die-cut from extra-thick steel, B&B clamps are much<br />
stronger than factory clamps. the flat design provides additional clearance<br />
at the distributor body. Studs and nuts included.<br />
CH24348 SB,BB, & 90 deg. V6 (gold)........................................... KIT 9.95<br />
CH24349 SB,BB, & 90 deg. V6 (chrome)...................................... KIT 10.95<br />
ARP Coil Bracket Bolt Kits<br />
$154.95<br />
The Digital Rev Limiter digitally controls RPM limits by stealing random sparks<br />
just one RPM past the limiter setting. This reduces spark plug fouling common<br />
to other rev limiters. You can set the limits in 100 RPM increments using<br />
easy-to-adjust rotary switches and with the TTL interface, the Digital Rev<br />
Limiter is compatible with most modern tachs. Limiter will operate on 6-18<br />
volts and has a 4-wire hookup for easy installation.<br />
CH24916 (Pertronix # 600)................................................. each 154.95<br />
HEI Advance Curve Kit<br />
Close-up<br />
Shown<br />
STARTING AT<br />
$4.95<br />
CH24080 black oxide (hex)........................................................... KIT 4.95<br />
CH24081 black oxide (12-point).................................................... KIT 4.95<br />
CH24082 stainless (hex)............................................................... KIT 6.95<br />
CH24083 stainless (12-point)........................................................ KIT 6.95<br />
1970-77 Distributor Hold Down<br />
Clamp<br />
$4.95<br />
Copper spring - light<br />
Silver spring - medium<br />
Brown spring - heavy<br />
CH22399 ........................................................................... KIT 4.95<br />
$2.99<br />
Ideal to hold distributor or magneto in place for accurate timing. Replaces<br />
late-model stock wire clamps. Extra bright chrome plating.<br />
CHT4116 70-77 All V8........................................................................... 2.99<br />
203